2080ti Thermal Pad replacements

[Skiiwee29]

Alright,

 

So I have been googling around and can't seem to find the actual sizes of the thermal pads on my EVGA 2080ti XC Black edition, Part Number: 11G-P4-2281-KR. Going to be placing the air cooler back on this card in a few weeks as it's been under water for nearly 3 years, so the original pads are likely dried out and bad at this point having been exposed to the air this whole time in storage. So I need to figure out what size pads I need to order. 

[chocolatekarma]

5 minutes ago, Skiiwee29 said:

Alright,

 

So I have been googling around and can't seem to find the actual sizes of the thermal pads on my EVGA 2080ti XC Black edition, Part Number: 11G-P4-2281-KR. Going to be placing the air cooler back on this card in a few weeks as it's been under water for nearly 3 years, so the original pads are likely dried out and bad at this point having been exposed to the air this whole time in storage. So I need to figure out what size pads I need to order. 

You can buy sheets and cut them to size manually.  That's what I do.

[Skiiwee29]

17 minutes ago, chocolatekarma said:

You can buy sheets and cut them to size manually.  That's what I do.

I realize that.. thats not what I asked.. how thick of pad do I need.. .5mm, 1.0mm, 1.5mm etc.. thats what I need.. not what to do/buy.. I know that part.. 

[Moonzy]

14 minutes ago, Skiiwee29 said:

I realize that.. thats not what I asked..

to be fair

38 minutes ago, Skiiwee29 said:

what size pads I need to order.

you did ask for size instead of thickness

 

that said, I've no clue on what thickness that card uses, but you can probably measure it, thermal pads dont really dry out, no? they're oil, not water or something that dries easily

[Levent]

I wouldnt be surprised if it is identical to this.

[Skiiwee29]

49 minutes ago, Levent said:

I wouldnt be surprised if it is identical to this.

SNIP

I did see that in a thread, but that was for a water block install. Those sometimes have different thicknesses they use compared to stock with the air cooler, so unsure. 

 

52 minutes ago, Moonzy said:

to be fair

you did ask for size instead of thickness

 

that said, I've no clue on what thickness that card uses, but you can probably measure it, thermal pads dont really dry out, no? they're oil, not water or something that dries easily

ok, ill give you that on a technicality. 

[chocolatekarma]

7 hours ago, Skiiwee29 said:

I realize that.. thats not what I asked.. how thick of pad do I need.. .5mm, 1.0mm, 1.5mm etc.. thats what I need.. not what to do/buy.. I know that part.. 

That's exactly what you asked...  I would hope that a mod here knows how to properly express themselves. 

 

Anyway...  1.5 mm is the thickness you would want.