scratch build AL 26.982 alluminium scratch build mod

[mayhem_modz]

 

Start a new adventure ..... ahead with the sponsors ..

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

cooling

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[mayhem_modz]

let's start ... Aluminum strips and cluttering management ..

 

 

 

Cut the strips at length of 50 cm

 

 

 

Here is the base .. 50 cm x 23 cm there's enough space for everything ..

 

 

[mayhem_modz]

Basic consolidation and support for fixing the front panels (tank) and rear Technical tests

 

 

 

 

 

The front panel will be a tank (it is the first time I realize it we hope ...) that in addition to being a hrdware part for cooling it will be part of the structure in the case ..

 

 

The 4 panels of 0.5 mm a total of 2 cm

 

 

all together must be processed

 

 

 

Rear panel also in the inserore support a LED lamina There are 3 0.4 mm panels

 

 

 

Test ... view from below

 

 

still have to create the upper cover with supports that will hold the side panels for anchored to the structure An insertion of 2 vertical plates 1 for the motherboard and another for coverage - LEDS logos etc will give greater stability to everything ..

 

[mayhem_modz]

My modest opinion is that when you realize this type of projects especially without machines,

you have to leave very well because everything you will be created later will be leaning on the basis Realization of the upper structural support panel,

almost identical to the lower one but with only 2 hubs to keep the structure tightly, the radiator and fans will be fixed on this panel

 

 

back, these 3 panels of 4 mm each will have worked later

 

 

Assembly with temporary screws

 

 

test, the front panel that will be a tank, this too will be shaped later, the important thing is to build the stable structure.

 

 

 

Preparation of the base that will contain various cables, and on which it will pogge power supply and supports for the motherboard

 

 

The aluminum strips were shaped to the mm to perfectly coincide with the supports previously made in the case.

 

 

 

 

Upper panel that will be well fixed to the aluminum structure, and where I will also make holes and openings to fix radiator and fans, other higher panels will be built followed + other fronts

 

[mayhem_modz]

The front panel is as important as the alloy wheels for a used car ... I realize supports with "U" aluminum profiles these will support in transparent acrylic panel So signed by hand and we leave ...

 

 

They will still have to be well finished but the base is ..

 

 

 

 

 

will be fixed with m3 screws on the tank and on the chassis .. that's why it was so important to start well with the base ...

 

[mayhem_modz]

OPS .... Rear panels don't go everything. Well ... I think they had a remarkable tension, you learn this and refers to ... all three ...

 

 

 

[mayhem_modz]

Completion of the Motherboard Tray which is integrated into the case making everything much more stable, the panels are 2,

spaced of 2 cm to welcome the cables and more .. And in turn use them as a base to add other LED panels and logos ..

Low back fixing and above all very stable

 

 

 

 

 

 

 

Here is the assembly of the structure

 

 

 

 

 

 

 

 

 

 

 

t will seem little but SOO this has requested a lot of work around 2 days next step ... this ....

burst on the posterior panel for the power supply ..

 

[mayhem_modz]

Realization of the back shield

 

 

 

The panels are 3 I like to give them three-dimensionality ..

 

 

 

 

 

 

final results.

 

[mayhem_modz]

PSU cover

 

 

Additional bracket for positioning the graphics card at 45 °

 

 

 

 

 

 

I got a gift ..

 

 

Completion of rear panel. 3 pieces of 4 mm central one has leds ..

 

 

 

[mayhem_modz]

45° gpu bracket

 

 

 

 

 

 

 

 

 

 

 

The toilet paper is exclusively for modding use ..

[mayhem_modz]

Waiting for CableMod cables to arrive I make the combs to fix on the case.

 

 

 

 

 

 

finished...

 

 

[mayhem_modz]

top panel. I created two custom-made supports on which the radiator and relative fans will be installed, 3 incoming and 3 outgoing

 

internal panel

 

 

 

external panel

 

 

 

 

 

These 2 panels for united support are very resistant and integral sonopartes of the structure

 

 

[mayhem_modz]

thank you  cablemod

 

[mayhem_modz]

feet arrived a special thanks to Explore Modding

 

 

 

 

 

 

 

 

inside led panel 3 parts.

 

 

 

 

 

 

 

 

 

[mayhem_modz]

I had to vary my original project that included 6 fans on the 360 or 3 radiator in incoming and 3 outgoing I leave the 3 entering this, because damaged the aesthetics of the case ..

Under with photos ... Proceed with 2 acrylic panels, the front panel of the new Mac Pro, essentially are 2 overlapping panels with holes that alternate give this pleasant effect ..

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[mayhem_modz]

Conclusion of the complicated panel that welcomes the motherboard All cables and skirt if not structural part of the whole PC What I realize is an external panel that besides closing I will be in Leds essentially would have to come like this,

 

 

the LEDs will then be put but this after painting These sibits the latest panels to make ...

 

Structural panelpannello strutturale

 

 

 

 

 

 

 

 

even here then LED will be positioned and a 2 mm additional panel with logos created

 

 

 

This is the internal panel that welcomes the motherboard we mount everything.

 

 

 

 

 

 

 

 

[mayhem_modz]

Expansion PSU and shaping cover

 

 

 

 

holes power and leds button

 

 

 

 

 

 

Assembly ..

 

 

to be continued...

 

 

[mayhem_modz]

Creation of the tank that will be installed in the front,

previously I had already cut the various layers of Plexiglass now it is Shapes glue and set up the holes for cooling tubes.

It is hoped that it comes like this project ...

 

 

 

 

 

 

 

 

 

 

Before closing hermetically ... test

 

 

 

 

[mayhem_modz]

all panels have been realized, It is time to fix pump position And where to fix the cables inside

 

 

 

 

 

[mayhem_modz]

And after unulmable color tests we are Painting ... It starts from the bottom and rear panels ....

 

 

 

 

 

 

 

[mayhem_modz]

back led panel complete

 

 

 

 

 

 

 

 

 

 

[VIDEO][MEDIA=youtube]Ey_EH_4wWDw[/MEDIA]

[mayhem_modz]

We begin to reassemble everything ..

 

 

 

Halo Cooler Master fan paints. It was a real company since you can disassemble up to a certain point ...

 

 

 

 

 

 

 

Assembly on the radiator

 

 

 

 

Top panel assembly

 

 

 

 

 

 

 

[mayhem_modz]

disassembling and painting rams

 

 

 

 

 

 

 

 

 

[mayhem_modz]

Installation LEDs strips inside the panels

 

 

 

 

 

 

 

 

 

 

Upper panels with fans mounted

 

 

 

 

[mayhem_modz]

Seasonic GX 1000 power supply disassembly ... I could not leave it so ...

 

 

I help label removal with a hair dryer.

 

 

 

 

Reassembly

 

 

 

 

 

 

come on ... let's see how it stands inside ....