HELP!!!Cpu red ligh

[ALEKSANDAR87990]

Hello i have a big problem.I bought i5 10600kf and Z590 Msi mpg gaming force board.But when i turn on pc it shows CPU res light on mb.I tried everything swaping memory,using just one stick,cpu cooler detach/attach,with and without gpu.Can it be a bios problem or something?Every light works good from gpu,motherboard,memory etc.But one thing that i noticed is that mouse and keyboard when plugged in wont light up.I tried to put my finger direct on cpu anf its hot sooo it works right?I dont know what to fo help

[Guest]

Did you try to clear cmos?

[ALEKSANDAR87990]

1 minute ago, ShrimpBrime said:

Did you try to clear cmos?

Yes,i tried that too :(.The one thing that i didnt try is to replace the battery.

[Guest]

What's the power supply make and model?

[ALEKSANDAR87990]

2 minutes ago, ShrimpBrime said:

What's the power supply make and model?

This is my full spec right now

Msi mpg Z590 gaming force

I5 10600k

Rtx 2060 Msi gaming Z

2x8gb gigabyte aorus 2x8gb 3600mhz

Psu FSP Hyperk 700w

Wd green 1tb

Seagate 500gb

128gb ssd toshiba

 

 

[Guest]

Do you have both of the 8pin EPS connectors plugged in?

[ALEKSANDAR87990]

1 minute ago, ShrimpBrime said:

Do you have both of the 8pin EPS connectors plugged in?

Yeah,i tried with just one and it didnt work aswell

[Guest]

Did you reseat the processor into the socket/check for bent pins?

Cooler mounting pressure is not over tightened?

[Gohardgrandpa]

Check the pins in the board

[ALEKSANDAR87990]

17 minutes ago, ShrimpBrime said:

Did you reseat the processor into the socket/check for bent pins?

Cooler mounting pressure is not over tightened?

 

16 minutes ago, Gohardgrandpa said:

Check the pins in the board

Yeah i have checked and its ok.I tried to reset the cpu and deatach the cooler and jut put on cpu and nothing works

[Guest]

2 minutes ago, ALEKSANDAR87990 said:

 

Yeah i have checked and its ok.I tried to reset the cpu and deatach the cooler and jut put on cpu and nothing works

Do you have a different cpu to test with? That's about your only option at this point.

[ALEKSANDAR87990]

9 minutes ago, ShrimpBrime said:

Do you have a different cpu to test with? That's about your only option at this point.

I will try to go in the nearby store and try it.Im furious

[Gohardgrandpa]

Only thing I can think of that you can do tonight would be a bios update, should be able to do it without the cpu in that one right?

 

[ALEKSANDAR87990]

1 minute ago, Gohardgrandpa said:

Only thing I can think of that you can do tonight would be a bios update, should be able to do it without the cpu in that one right?

 

Yeah,i have that usb flash boot and bios button on back io. 

[Gohardgrandpa]

5 minutes ago, ALEKSANDAR87990 said:

Yeah,i have that usb flash boot and bios button on back io. 

I would try to put the newest bios on that flash drive and update it. See what happens, at this point the only thing you really have left to do is try a different cpu in it unfortunately

[ALEKSANDAR87990]

5 minutes ago, Gohardgrandpa said:

I would try to put the newest bios on that flash drive and update it. See what happens, at this point the only thing you really have left to do is try a different cpu in it unfortunately

Can you please explain how to do that?I didnt update bios in that way. 

[Gohardgrandpa]

Each board is different but generally there is a usb port that you use to update the bios. You'll have to look online or in your manual to see how to initiate this procedure.

You put the bios onto the flash drive and normally hold the flashback button til it flashes then insert the usb stick

[--SID--]

3 hours ago, ALEKSANDAR87990 said:

Yeah,i tried with just one and it didnt work aswell

How did you try with two CPU connectors? That junk PSU (because that's what Hyper K is) only have one!

[ALEKSANDAR87990]

13 minutes ago, --SID-- said:

How did you try with two CPU connectors? That junk PSU (because that's what Hyper K is) only have one!

I have 2x8pin cpu connector.Its Fsp hyperk pro 700w. 

[Guest]

6 hours ago, --SID-- said:

How did you try with two CPU connectors? That junk PSU (because that's what Hyper K is) only have one!

Well its 2x 4 pin connectors.

......

Needs 2x 8pin EPS connectors, then the board will probably post.

[ALEKSANDAR87990]

6 hours ago, ShrimpBrime said:

Well its 2x 4 pin connectors.

......

Needs 2x 8pin EPS connectors, then the board will probably post.

Oh sorry its 2x8pin(1x8+1x4+4) not 2x4 my mistake

[Guest]

I am having the same problem.  It booted after q-flasing the first few times.  I had an MSI and it failed that way, I returned everything.  I wasn't refunded to my card so I had to buy components again, and went with gigabyte. Same problem.  Once booted I had to leave it running to avoid the problem. I left it running for as long as I could (a year I think) and then I got evicted for paying at a woman's legal business...  So I had to unplug...  So now I am having the same problem...  They said to remove everything and put it all back, it appears that pulled out a milimeter a pin or two of the cpu connection.  No one seems to want to share how to get it to survive powering down.  No one seems to share "how" for instance "ground the outlet" means "the third 'ground' of the plug needs to be connected to the 'n' line coming from the power company".  

[Guest]

On 10/23/2021 at 7:19 PM, Stephen7 said:

I am having the same problem.  It booted after q-flasing the first few times.  I had an MSI and it failed that way, I returned everything.  I wasn't refunded to my card so I had to buy components again, and went with gigabyte. Same problem.  Once booted I had to leave it running to avoid the problem. I left it running for as long as I could (a year I think) and then I got evicted for paying at a woman's legal business...  So I had to unplug...  So now I am having the same problem...  They said to remove everything and put it all back, it appears that pulled out a milimeter a pin or two of the cpu connection.  No one seems to want to share how to get it to survive powering down.  No one seems to share "how" for instance "ground the outlet" means "the third 'ground' of the plug needs to be connected to the 'n' line coming from the power company".  

I replaced my CMOS battery.  It boots now.