Jump to content

Asus ROG MAXIMUS XIII HERO , not restart !

Nizar77
By Nizar77
in Troubleshooting
 Share
Posted

Asus ROG MAXIMUS XIII HERO

Intel 11900k

1x Samsung 980 pro 2T

Gskill 64G 4400
use : Music production and Gaming.

 

I build this PC , I installed windows 10pro and everything were ok... now it's not restarting, it just  freezing afeter the restart, and I read A0 error on the mother board! , I reformatted the m.2 and install windows again butt still the same problem. do you know the reason ?

Thanks

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

You have a top board with many options.

The first 2 that come to mind...

Retry button

Clear cmos button. 

 

A0 is IDE initialization has started. Which probably means nothing because you're not running IDE mode....??

Yeah, try the clear cmos button first.

 

Good Luck!

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

@Nizar77 Sorry to semi hijack this thread but what M.2 slot did you put your NvME in ? as im having crashes using the M.2_1 and am trying to work out if its a faulty drive or MB as in M.2_2 it works fine but then it only works at x8 speed for GPU.  I have the same MB and CPU hence my question.

Link to comment
Share on other sites
Link to post
Share on other sites
  • 3 weeks later...
Posted
  • Author

ASUS Maximus rog Hero Viii 

11900K

 

Hello I have quick question about the ATX 12v 1&2 ,,,, should I Connect both to the power supply or only one? in case only one of them , which one ? thanks

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Why wouldn't you use both? You can only use one (which one doesnt matter) but a CPU and mobo this expensive usually mean an all-out build with a high end PSU which will have at least 2 of these plugs.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Both atx 12v connectors (4 + 4pins for a total of 8pins) are needed. 

 

The Maximus Hero VIII has an lga 1151 socket and not lga 1200 which is what the 11900k uses.

Are you sure you're referring to the correct motherboard?

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
5 minutes ago, WoodenMarker said:

Both atx 12v connectors (4 + 4pins for a total of 8pins) are needed. 

 

The Maximus Hero VIII has an lga 1151 socket and not lga 1200 which is what the 11900k uses.

Are you sure you're referring to the correct motherboard?

thanks for reply I think I write it wrong ... I have  Asus Rog Maximus Xiii Hero + 11900k.... so do I need to connect both of ATX 12v? 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
24 minutes ago, Nizar77 said:

thanks for reply I think I write it wrong ... I have  Asus Rog Maximus Xiii Hero + 11900k.... so do I need to connect both of ATX 12v? 

The user manual doesn't seem to specify whether or not both are necessary.

One 8pin connector (atx_12v_1) is usually enough for the system to post and operate at stock speeds or for moderate overclocking with the second 8pin (atx_12v_2) being for additional power for hardcore overclocking. It's recommended to plug both in if possible. 

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
9 minutes ago, WoodenMarker said:

The user manual doesn't seem to specify whether or not both are necessary.

One 8pin connector (atx_12v_1) is usually enough for the system to post and operate at stock settings with the second 8pin (atx_12v_2) being for additional power for overclocking. It's recommended to plug both in if possible. 

the power supply only has one connecter (8Pin) and the rest are VGA connectors ,,,, I'm asking because I finished build this pc but after install windows 10 ,the system always freezes!! even with fresh windows ! and don't know the reason ,,, can the RAM be the problem? Gskilll 2X 32G 4400mhz.... thanks in advance

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
12 minutes ago, Nizar77 said:

the power supply only has one connecter (8Pin) and the rest are VGA connectors ,,,, I'm asking because I finished build this pc but after install windows 10 ,the system always freezes!! even with fresh windows ! and don't know the reason ,,, can the RAM be the problem? Gskilll 2X 32G 4400mhz.... thanks in advance

Plugging in only one of the 8pin connectors shouldn't cause freezing. If it were a problem, the system should post with an error that instructs for the second 8pin connector to be connected or it shouldn't post at all. 

 

Have you tried reseating the ram / m.2 drive or using only 1 stick of ram and trying a different m.2 slot?

 

I see there's an earlier thread regarding this issue and it may be more helpful to keep discussion in one place -- merged threads. 

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
22 minutes ago, WoodenMarker said:

Plugging in only one of the 8pin connectors shouldn't cause freezing. If it were a problem, the system should post with an error that instructs for the second 8pin connector to be connected or it shouldn't post at all. 

 

Have you tried reseating the ram / m.2 drive or using only 1 stick of ram and trying a different m.2 slot?

 

I see there's an earlier thread regarding this issue and it may be more helpful to keep discussion in one place -- merged threads. 

sorry I wrote wrong question

 

ok I will try

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
8 hours ago, Nizar77 said:

sorry I wrote wrong question

 

ok I will try

Hi... I changed the ram slot and I removed the m.2 and put a sata ssd... The same problem...freezing even with fresh windows ... Is there in other options to try? In bios as example? Thank you so much

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×