Extremely large motherboard - Case Recommendations

[Novasconce]

I have an older workstation, a Dell T7610. It has dual procs and room for 16 dims of ddr3 ecc ram (has 32gb currently). It has 2 quatro k4000 gpus. I would like to repurpose this as a nas/media server and vm server. I however don't want to use the dell case as it doesn't have the ability to support more than 4 hot swap bays (it does have a raid controller but I would rather not use it.). The motherboard measures approx. 15 in x 14.5 in and I can't find any cases much less a nas enclosure that will support a board that large. Any help or suggestions would be greatly appreciated.

[Somerandomtechyboi]

Make your own case or put it on top of a cardboard box

 

You might be able to use a dremel and cut the case tray thingy or whatever tf it was called that has the mobo screws preinstalled so you dont have to do that step

[GuiltySpark_]

Interesting read that may be of use. https://www.dell.com/community/Desktops-General-Read-Only/Precision-T7610-Motherboard/td-p/5083731

[Novasconce]

1 hour ago, rickeo said:

Interesting read that may be of use. https://www.dell.com/community/Desktops-General-Read-Only/Precision-T7610-Motherboard/td-p/5083731

Thank you, that definitely shows how complicated this could be because of Dell using proprietary everything...