Jump to content

CAT6 not transferring data over 100MBps...Any idea why ?!

Redsiskin
By Redsiskin
in Networking
 Share
Posted

on the cable it state "S-STP PIMF CAT6 PATCH CABLE 75C ANSI/TIA/EIA 568B COMPLIENT ISO/IEC 11801 VERIFIED "

 

using network tester [shity one from ebay as pic]

 

it show one side 1-2-3-4-5-6-7-8-g

on the other side it skip 4-5-6

 

but the connector brand new and the wires are in the right order 568b

 

 

rtaImage1.jpg.b9abb61581e0285b6edaeb2895803e39.jpg

H1e8652622b184352899e3ad5d1341240x.jpg

“When the last tree is cut down, the last fish eaten and the last stream poisoned, you will realize that you cannot eat money.”
 
Link to comment
Share on other sites
Link to post
Share on other sites
Posted

What's your link speed in (Windows 10)Settings>Network and Internet>Ethernet>-your active adapter-?

On 4/5/2024 at 10:13 PM, LAwLz said:

I am getting pretty fucking sick and tired of the "watch something else" responses. It's such a cop out answer because you could say that about basically anything, and it doesn't address the actual complaints. People use it as some kind of card they pull when they can't actually respond to the criticism raised but they still feel like they need to defend some company/person. If you don't like this thread then stop reading it. See how stupid it is? It's basically like telling someone "shut the fuck up". It's not a clever responsive, it doesn't address anything said, and it is rude. 

 ^

 

bruh switch to dark mode its at the bottom of this page

VPN Server Guide

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

A faulty connection with missing wires results in 100Mbs

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 10 and Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

How many watts do I need? ATX 3.0 & PCIe 5.0 spec, PSU misconceptions, protections explained, group reg is bad

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
Just now, Oshino Shinobu said:

This is why. Wires aren't making a proper connection. If you made the cable yourself, you'll need to remake it, or otherwise buy a new one.

Yeah, and next time be carefull with them as much as you can because they are very fragile. Dont bend them too much etc.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
40 minutes ago, Redsiskin said:

100MBps

MBps or Mbps? 100MBps is about what gigabit can do; 100Mbps is what you'll get with a ethernet cable missing conductors like yours.

Main System (Byarlant): Ryzen 7 5800X | Asus B550-Creator ProArt | EK 240mm Basic AIO | 16GB G.Skill DDR4 3200MT/s CAS-14 | XFX Speedster SWFT 210 RX 6600 | Samsung 990 PRO 2TB / Samsung 960 PRO 512GB / 4× Crucial MX500 2TB (RAID-0) | Corsair RM750X | Mellanox ConnectX-3 10G NIC | Inateck USB 3.0 Card | Hyte Y60 Case | Dell U3415W Monitor | Keychron K4 Brown (white backlight)

 

Laptop (Narrative): Lenovo Flex 5 81X20005US | Ryzen 5 4500U | 16GB RAM (soldered) | Vega 6 Graphics | SKHynix P31 1TB NVMe SSD | Intel AX200 Wifi (all-around awesome machine)

 

Proxmox Server (Veda): Ryzen 7 3800XT | AsRock Rack X470D4U | Corsair H80i v2 | 64GB Micron DDR4 ECC 3200MT/s | 4x 10TB WD Whites / 4x 14TB Seagate Exos / 2× Samsung PM963a 960GB SSD | Seasonic Prime Fanless 500W | Intel X540-T2 10G NIC | LSI 9207-8i HBA | Fractal Design Node 804 Case (side panels swapped to show off drives) | VMs: TrueNAS Scale; Ubuntu Server (PiHole/PiVPN/NGINX?); Windows 10 Pro; Ubuntu Server (Apache/MySQL)


Media Center/Video Capture (Jesta Cannon): Ryzen 5 1600X | ASRock B450M Pro4 R2.0 | Noctua NH-L12S | 16GB Crucial DDR4 3200MT/s CAS-22 | EVGA GTX750Ti SC | UMIS NVMe SSD 256GB / Seagate 1.5TB HDD | Corsair CX450M | Viewcast Osprey 260e Video Capture | Mellanox ConnectX-2 10G NIC | LG UH12NS30 BD-ROM | Silverstone Sugo SG-11 Case | Sony XR65A80K

 

Camera: Sony ɑ7II w/ Meike Grip | Sony SEL24240 | Samyang 35mm ƒ/2.8 | Sony SEL50F18F | Sony SEL2870 (kit lens) | PNY Elite Perfomance 512GB SDXC card

 

Network:

Spoiler 
                           ┌─────────────── Office/Rack ────────────────────────────────────────────────────────────────────────────┐
Google Fiber Webpass ────── UniFi Security Gateway ─── UniFi Switch 8-60W ─┬─ UniFi Switch Flex XG ═╦═ Veda (Proxmox Virtual Switch)
(500Mbps↑/500Mbps↓)                             UniFi CloudKey Gen2 (PoE) ─┴─ Veda (IPMI)           ╠═ Veda-NAS (HW Passthrough NIC)
╔═══════════════════════════════════════════════════════════════════════════════════════════════════╩═ Narrative (Asus USB 2.5G NIC)
║ ┌────── Closet ──────┐   ┌─────────────── Bedroom ──────────────────────────────────────────────────────┐
╚═ UniFi Switch Flex XG ═╤═ UniFi Switch Flex XG ═╦═ Byarlant
   (PoE)                 │                        ╠═ Narrative (Cable Matters USB-PD 2.5G Ethernet Dongle)
                         │                        ╚═ Jesta Cannon*
                         │ ┌─────────────── Media Center ──────────────────────────────────┐
Notes:                   └─ UniFi Switch 8 ─────────┬─ UniFi Access Point nanoHD (PoE)
═══ is Multi-Gigabit                                ├─ Sony Playstation 4 
─── is Gigabit                                      ├─ Pioneer VSX-S520
* = cable passed to Bedroom from Media Center       ├─ Sony XR65A80K (Google TV)
** = cable passed from Media Center to Bedroom      └─ Work Laptop** (Startech USB-PD Dock)

 

Retired/Other:

Spoiler

Laptop (Rozen-Zulu): Sony VAIO VPCF13WFX | Core i7-740QM | 8GB Patriot DDR3 | GT 425M | Samsung 850EVO 250GB SSD | Blu-ray Drive | Intel 7260 Wifi (lived a good life, retired with honor)

Testbed/Old Desktop (Kshatriya): Xeon X5470 @ 4.0GHz | ZALMAN CNPS9500 | Gigabyte EP45-UD3L | 8GB Nanya DDR2 400MHz | XFX HD6870 DD | OCZ Vertex 3 Max-IOPS 120GB | Corsair CX430M | HooToo USB 3.0 PCIe Card | Osprey 230 Video Capture | NZXT H230 Case

TrueNAS Server (La Vie en Rose): Xeon E3-1241v3 | Supermicro X10SLL-F | Corsair H60 | 32GB Micron DDR3L ECC 1600MHz | 1x Kingston 16GB SSD / Crucial MX500 500GB

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
44 minutes ago, RockSolid1106 said:

What's your link speed in (Windows 10)Settings>Network and Internet>Ethernet>-your active adapter-?

 

Link speed (reception / transmission): 1000/1000 (Mbps)
Manufacturer: Intel
Description: Intel (R) Ethernet Connection (2) I218-V
Driver version: 12.19.1.37

“When the last tree is cut down, the last fish eaten and the last stream poisoned, you will realize that you cannot eat money.”
 
Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Should i get connectors like that ? i always have issue when i use crimping tools.

H30ab8a07e2974b28b4f2315ac6ff35e24.jpg?width=790&height=1554&hash=2344

 

“When the last tree is cut down, the last fish eaten and the last stream poisoned, you will realize that you cannot eat money.”
 
Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Networking

×