1 rear exhaust + 2 top exhaust = possible ?

[Chris Pratt]

47 minutes ago, Caroline said:

 

I've always wondered who came up the idea of making a case with literally no air intakes saying "hey hey, maybe... we should make a case that looks like a 80's deco fridge BUT WAIT, let's add tempered glass to it so it traps as much heat as possible inside!!" and then everyone at the R&D depts. agreed on that it was a great idea.  Just... wow.

It happens a lot on prebuilts, because they basically have to sell it from a picture, and having a good looking case with lots of RGB bling attracts more attention than a solid airflow focused design would. I've seen a ton of really just gorgeous cases that I would never actually buy, because I can tell by looking at them that they have no airflow. The average Joe buying a computer doesn't know any better though.

[Mikey89]

4 hours ago, Chris Pratt said:

It happens a lot on prebuilts, because they basically have to sell it from a picture, and having a good looking case with lots of RGB bling attracts more attention than a solid airflow focused design would. I've seen a ton of really just gorgeous cases that I would never actually buy, because I can tell by looking at them that they have no airflow. The average Joe buying a computer doesn't know any better though.

@Chris Pratt

 

I probabil forgot tot mention this.

 

The system is not pre-built, i bought every part after analyzing it a bit.. i just had the bad luck to leave the case for the guys at the shop to deal with... i had no idea it would be this bad... also at first glance i thought i might be able to put coolers in front also... then i found out it's not possible, just 1 rear + 2 top.

[Mikey89]

5 hours ago, Dedayog said:

You really have gone so far as to not only claim I said you were incorrect about something incorrectly referenced, but also to argue BACK AT US the very point we put to you since page 1.

 

Thread has gone full circle now, well done

 

You said a few posts back that i was incorect in my opnions and assumputions.

 

That's why said i am NOT incorect in saying that more FPS will makes the GPU work harder... this stands for any GPU.

 

Higher GPS (over monitor's refresh rate) = Higher temp when gaming

 

Also i don't remember talking about VSYNC and FPS in page 1 in this topic only pages 3 and 4.

 

 

 

 

 

 

 

[Mark Kaine]

On 7/13/2021 at 3:15 PM, Mikey89 said:

I don't have any fans on the front because the case doesn't allow for that

if thats really the case this is horrible design, you *need* front intakes.

 

3 "exhaust" is way too much, 1 is usually enough however.

 

[BetteBalterZen]

15 hours ago, Gohardgrandpa said:

All the time you wasted asking questions on here you could of tried what was suggested instead of .... You ask for help but not willing to do any work yourself. 

Yeeees, exactly........ 

[Mikey89]

34 minutes ago, BetteBalterZen said:

Yeeees, exactly........ 

Even If i wanted i still DO NOT have the 2 coolers i am waiting to be delivered... I already mentioned this earlier... 

 

I swear it's like people forgot how to user their brain...

[BetteBalterZen]

1 minute ago, Mikey89 said:

Even If i wanted i still DO NOT have the 2 coolers i am waiting to be delivered... I already mentioned this earlier... 

 

I swear it's like people forgot how to user their brain...

My original comment was about the 3 fans you talked about, how you should use them (intake/outtake). 

[Mikey89]

@Dedayog

 

Would this case provide better cooling and temps ?

 

https://www.pcgarage.ro/carcase/cooler-master/cooler-master-masterbox-mb511-rgb/

 

If yes any idea by how much temp-wise ?

[Mikey89]

8 hours ago, Mark Kaine said:

if thats really the case this is horrible design, you *need* front intakes.

 

3 "exhaust" is way too much, 1 is usually enough however.

 

@Mark Kaine

 

Would this case provide better ariflow and temps ?

 

https://www.pcgarage.ro/carcase/cooler-master/cooler-master-masterbox-mb511-rgb/

 

[Dedayog]

2 hours ago, Mikey89 said:

@Dedayog

 

Would this case provide better cooling and temps ?

 

https://www.pcgarage.ro/carcase/cooler-master/cooler-master-masterbox-mb511-rgb/

 

If yes any idea by how much temp-wise ?

Looks like it.  Potential for:  3 front intake, 2 top exhaust, 1 rear exhaust.  No idea on temp delta.

[Mikey89]

1 minute ago, Dedayog said:

Looks like it.  Potential for:  3 front intake, 2 top exhaust, 1 rear exhaust.  No idea on temp delta.

What i mean is would it provide WAY better airflow and cooling than current one ?

 

How is the airflow in the CM Masterbox in your opinion ?

[Mark Kaine]

1 minute ago, Mikey89 said:

What i mean is would it provide WAY better airflow and cooling than current one ?

yeah, it has to be - IF it has a front mesh...

 

its probably similar to this, which is pretty good

https://www.amazon.com/gp/aw/d/B0839Y7933/ref=psdcmw_572238_t2_B01MDS8L83

 

 

 

 

[Dedayog]

1 minute ago, Mikey89 said:

What i mean is would it provide WAY better airflow and cooling than current one ?

 

How is the airflow in the CM Masterbox in your opinion ?

I can only comment on what I know.  3 in and 3 out are good flow, mesh front it looks like?  Way better temps (5-10c) I would bet.

 

Don;t know anything about that case except what I see.  It's the same thing you see. 3 in, 3 out.

[Mikey89]

@Dedayog

@Mark Kaine

 

Mesh ? You mean that grill on the front ?

[Mark Kaine]

Just now, Mikey89 said:

@Dedayog

@Mark Kaine

 

Mesh ? You mean that grill on the front ?

front mesh yes.

 

personally what i linked would be my.choice just have to ad *one* rear exhaust really 

 

https://www.amazon.com/gp/aw/d/B0839Y7933/ref=psdcmw_572238_t2_B01MDS8L83

 

 

[Mikey89]

4 minutes ago, Mark Kaine said:

front mesh yes.

 

personally what i linked would be my.choice just have to ad *one* rear exhaust really 

 

https://www.amazon.com/gp/aw/d/B0839Y7933/ref=psdcmw_572238_t2_B01MDS8L83

 

 

Would there be a huge difference between the MB511 and the TD500 temp-wise ?

 

Which one has better cooling ?

[Dedayog]

18 minutes ago, Mikey89 said:

Would there be a huge difference between the MB511 and the TD500 temp-wise ?

 

Which one has better cooling ?

The TD500 is on the graph I showed you from Gamers Nexus, reference that for one.  The MB511 should be very similar due to having similar fan loadouts.

 

 

[Mark Kaine]

19 minutes ago, Mikey89 said:

Would there be a huge difference between the MB511 and the TD500 temp-wise ?

 

Which one has better cooling ?

No, theyre pretty similar I guess, the td500 comes with better QOL features, better materials and looks far better (imo) thats about it.

Temps should be roughly the same.

 

just make sure you have 3 front intake fans, 1 rear (top isnt super necessary)

[Mikey89]

12 minutes ago, Mark Kaine said:

No, theyre pretty similar I guess, the td500 comes with better QOL features, better materials and looks far better (imo) thats about it.

Temps should be roughly the same.

 

just make sure you have 3 front intake fans, 1 rear (top isnt super necessary)

 

15 minutes ago, Dedayog said:

The TD500 is on the graph I showed you from Gamers Nexus, reference that for one.  The MB511 should be very similar due to having similar fan loadouts.

 

 

MB511 it is then !

 

Also since the 2 fans are coming anyway could i setup the MB511 like this :

 

- 1 rear exhaust

- 2 top exhaust

- 3 front intake

 

Would that be good ?

[Dedayog]

56 minutes ago, Dedayog said:

I can only comment on what I know.  3 in and 3 out are good flow, mesh front it looks like?  Way better temps (5-10c) I would bet.

 

Don;t know anything about that case except what I see.  It's the same thing you see. 3 in, 3 out.

 

59 minutes ago, Dedayog said:

Looks like it.  Potential for:  3 front intake, 2 top exhaust, 1 rear exhaust.  No idea on temp delta.

 

11 minutes ago, Mikey89 said:

 

MB511 it is then !

 

Also since the 2 fans are coming anyway could i setup the MB511 like this :

 

- 1 rear exhaust

- 2 top exhaust

- 3 front intake

 

Would that be good ?

 

You need to stop re-asking the same thing people have stated multiple times. 

 

Yes, remember to think HAIR DRYER.  Cool air in, hot air out.

[Mikey89]

15 minutes ago, Dedayog said:

 

 

 

You need to stop re-asking the same thing people have stated multiple times.

I mean i don't want to screw up the fan orientation...

 

That's why i was asking if this is the correct and appropriate way, i have no idea if this is how it should be or if i would need to change something.

 

- 1 rear exhaust

- 2 top exhaust

- 3 front intake

[Dedayog]

17 minutes ago, Mikey89 said:

I mean i don't want to screw up the fan orientation...

 

That's why i was asking if this is the correct and appropriate way, i have no idea if this is how it should be or if i would need to change something.

 

- 1 rear exhaust

- 2 top exhaust

- 3 front intake

I'm not going to answer that   I've done so 3-5 times now, depending if you count quoting myself 

[Mikey89]

1 hour ago, Dedayog said:

I can only comment on what I know.  3 in and 3 out are good flow, mesh front it looks like?  Way better temps (5-10c) I would bet.

 

Don;t know anything about that case except what I see.  It's the same thing you see. 3 in, 3 out.

@Dedayog

 

Sorry i forgot about this post of yours... i scrolled down and up earlier and didn't notice it.

 

Were you serious about 5-10'C though ? I mean would it be that big of a difference compared to my current case ?

[Dedayog]

6 minutes ago, Mikey89 said:

@Dedayog

 

Sorry i forgot about this post of yours... i scrolled down and up earlier and didn't notice it.

 

Were you serious about 5-10'C though ? I mean would it be that big of a difference compared to my current case ?

There was no sarcasm when I said it.  Do not discount what good airflow can do.  You have SHIT airflow now.  5-10c is a broad range ,but also what you can see in that graph between good and bad cases.  

 

Your case, while pretty, is very very much on the bad end of the spectrum.  As in I would wager it would be within the bottom 3 cases on GN's graph.

[Dedayog]

And why the hell do I continue to respond?!?!

 

Get the case, get the fans, put that shit together STOP worrying about temperatures!!!