My computer is acting a little weird after trying to install windows 10

[ShakerS]

Hi, my pc is acting weird lately.

 

My problem is that it wont finish through the Windows 10 setup. It just restarts it to the beginning and now I don't know what to do.

I had Windows 10 in the system before, but I had a problem where it was basically unusable. The gpu would spike to 100% everytime I had clicked on any program, even the search bar and the windows button. So logically I'd grabbed my flash drive with Windows 10 installer and inserted it in.

Now I've come to this problem!

I had tried to install it with my gpu, without my gpu (igpu), with 2 stick of ram, with 1 stick of ram, every connecters to the motherboard pins (except for power and fan) and nothing is working

If anyone has any ideas, it would be helpful to share it!

 

Specs:

CPU: AMD Ryzen 3 PRO 4350G

GPU: ASUS Radeon HD7970 DirectCU II 

RAM: Corsair Vengeance LPX DDR4 3200MHz 16GB

SSD: WD Blue SN550 500GB

MB: Gigabyte A520M S2H 

PSU: Chieftec PROTON 550w 80 PLUS Bronze 

 

[ChaoticChaosx]

Grab a new media creation tool and reinstall fresh again. While installing don't connect to the internet until at desktop the run updates there should be quite a bit. I ran into a complete black screen last time I did this connected to the internet. This is how I install windows on all my systems I build.