Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

Depends game to game but MOST are not RAM bandwidth limited and tuning timings usually is the go to...

Shadow of the Tombraider FPS does increase with Bandwidth, but many others see small gains hardly noticible.

 

I have 3200C14 OC at 4300C17, +15GB/s read/write and is 44ns down to 38ns (Intel) but even on Ryzen id go for 3600-3800 and lower timings myself...

 

Id chase lower timings with relatively high speed but try to get the best of both worlds..

Maximums - Asus Z97-K /w i5 4690 Bclk @106.9Mhz * x39 = 4.17Ghz, 8GB of 2600Mhz DDR3,.. Gigabyte GTX970 G1-Gaming @ 1550Mhz

 

Link to post
Share on other sites

Depends on the case. Usually SFX power supply, sometimes the slightly longer SFX-L will also fit. Some smaller cases require FlexATX PSUs.

CPU: Intel i7 6700k  | Motherboard: Gigabyte Z170x Gaming 5 | RAM: 2x16GB 3000MHz Corsair Vengeance LPX | GPU: Gigabyte Aorus GTX 1080ti | PSU: Corsair RM750x (2018) | Case: BeQuiet SilentBase 800 | Cooler: Arctic Freezer 34 eSports | SSD: Samsung 970 Evo 500GB + Samsung 840 500GB + Crucial MX500 2TB | Monitor: Acer Predator XB271HU + Samsung BX2450

Link to post
Share on other sites

Moved to CPUs, Motherboards, and Memory. Please check which subforum you are posting in. Your other thread about power supplies was also posted in the graphics card section, neither have anything to do with GPUs.

CPU: Intel i7 6700k  | Motherboard: Gigabyte Z170x Gaming 5 | RAM: 2x16GB 3000MHz Corsair Vengeance LPX | GPU: Gigabyte Aorus GTX 1080ti | PSU: Corsair RM750x (2018) | Case: BeQuiet SilentBase 800 | Cooler: Arctic Freezer 34 eSports | SSD: Samsung 970 Evo 500GB + Samsung 840 500GB + Crucial MX500 2TB | Monitor: Acer Predator XB271HU + Samsung BX2450

Link to post
Share on other sites
23 minutes ago, Gabin said:

This is the case

You can use a regular ATX PSU for that, BUT...that being said...may I suggest you look for a better case? Sure it looks nice but much like the NZXT H510 ariflow is gonna be pretty bad. Perhaps opt for a case that has mesh in front so it can actually take in fresh air?

RYZEN 7 3700X / MSI X570S TOMAHAWK MAX WIFI / ZOTAC 3070 TWIN EDGE OC / CORSAIR VENGEANCE RGB PRO 32GB @ 3200 / SAMSUNG 980 PRO M.2 / WD BLACK SN850 M.2 / GIGABYTE P750GM 80+ GOLD / MSI MAG FORGE 100R / MSI MAG CORELIQUID 240R 

 

Link to post
Share on other sites
1 hour ago, Gabin said:

This is the case.

Lmao, this abomination is not a Mini-iTX case, it's an mATX case without the possibility of using mATX board ... Any ATX PSU will fit.

Tag or quote me so i see your reply

Link to post
Share on other sites

Capacity doesn't matter as long as you have enough. If you don't fully utilize 16GB, then having 32GB does absolutely nothing for you.

 

That said, 3600MHz is better than 4400MHz here because of Ryzen's infinity fabric. It should run 1:1 with the RAM, and you're not getting the FCLK any higher than 1933MHz even with the most golden of golden 3600s. That means the absolute maximum RAM speed that would make sense is 3800MHz or 4000MHz downclocked slightly. There's no guarantee that you could run the FCLK over 1800MHz, though, which is why 3600MHz is the most commonly recommended speed for Ryzen. Anything higher is a dice roll.

 

As for timings, 3600MHz CL16 is easily available at the same cost as CL18, so you should go for CL16.

CPU: AMD Ryzen 9 5900X · Cooler: Artic Liquid Freezer II 280 · Motherboard: MSI MEG X570 Unify · RAM: G.skill Ripjaws V 2x16GB 3600MHz CL16 (2Rx8) · Graphics Card: ASUS GeForce RTX 3060 Ti TUF Gaming · Boot Drive: 500GB WD Black SN750 M.2 NVMe SSD · Game Drive: 2TB Crucial MX500 SATA SSD · PSU: Corsair White RM850x 850W 80+ Gold · Case: Corsair 4000D Airflow · Monitor: MSI Optix MAG342CQR 34” UWQHD 3440x1440 144Hz · Keyboard: Corsair K100 RGB Optical-Mechanical Gaming Keyboard (OPX Switch) · Mouse: Corsair Ironclaw RGB Wireless Gaming Mouse

Link to post
Share on other sites
On 6/16/2021 at 12:05 AM, Gabin said:

Is it better to have 16gb of ram with a ddr4 4400 and 19 latency or 32gb of ram with ddr4 3600 and 18 latency. I have a ryzen 5 3600. 
what would be better? 

3600mhz. 4400 is overkill and will probably make your system less stable. 3600 will probably feel smoother when actually using your pc.

Link to post
Share on other sites

are a dual gtx 730 better than one gtx 980 ti?

Link to post
Share on other sites

No. 

Friends don't let friends use Userbenchmark. Ban the term "bottleneck." Corps aren't your friends. If the PC does what you need it to do well enough, it's good enough. Don't build the "best" system, build the system that makes you happy. 

 

System specs:

Ryzen 5 5600X w/Arctic Freezer 34 eSports Duo | ASRock B550 PG Velocita | Radeon RX 6800 Reference

16GB Crucial Ballistix DDR4-3600mhz CL16 | 1TB Samsung 970 Evo Plus, 3TB Toshiba P300

Fractal Design Meshify 2 Compact | Seasonic Focus GX 750W

 

Link to post
Share on other sites

Even when the software support and perfectly scale 2x or even 4x 730s, it can't reach 980 Ti performance. 

| Intel i7-3770@4.2Ghz | Asus Z77-V | Zotac 980 Ti Amp! Omega | DDR3 1800mhz 4GB x4 | 300GB Intel DC S3500 SSD | 512GB Plextor M5 Pro | 2x 1TB WD Blue HDD |
 | Enermax NAXN82+ 650W 80Plus Bronze | Fiio E07K | Grado SR80i | Cooler Master XB HAF EVO | Logitech G27 | Logitech G600 | CM Storm Quickfire TK | DualShock 4 |

Link to post
Share on other sites

lol no

Current PC:

Spoiler

CPU: Intel i3 4160 Cooler: Integrated Motherboard: Integrated

RAM: G.Skill RipJaws 16GB DDR3 Storage: Transcend MSA370 128GB GPU: Intel 4400 Graphics

PSU: Integrated Case: Shuttle XPC Slim

Monitor: LG 29WK500 Mouse: G.Skill MX780 Keyboard: G.Skill KM780 Cherry MX Red

 

Budget Rig 1 - Sold For $750 Profit

Spoiler

CPU: Intel i5 7600k Cooler: CryOrig H7 Motherboard: MSI Z270 M5

RAM: Crucial LPX 16GB DDR4 Storage: Intel S3510 800GB GPU: Nvidia GTX 980

PSU: Corsair CX650M Case: EVGA DG73

Monitor: LG 29WK500 Mouse: G.Skill MX780 Keyboard: G.Skill KM780 Cherry MX Red

 

OG Gaming Rig - Gone

Spoiler

 

CPU: Intel i5 4690k Cooler: Corsair H100i V2 Motherboard: MSI Z97i AC ITX

RAM: Crucial Ballistix 16GB DDR3 Storage: Kingston Fury 240GB GPU: Asus Strix GTX 970

PSU: Thermaltake TR2 Case: Phanteks Enthoo Evolv ITX

Monitor: Dell P2214H x2 Mouse: Logitech MX Master Keyboard: G.Skill KM780 Cherry MX Red

 

 

Link to post
Share on other sites

a gt730 is waaaaayyyyy less than half the performance of a 980ti, so even if you had 100% scaling, you would still be way behind.

please, pm me if you would like to contribute to my gpu bios database (includes overclocking bios, stock bios, and upgrades to gpus via modding)

Bios database

My beautiful, but not that powerful, main PC:

prior build:

Spoiler

 

 

Link to post
Share on other sites

Hi I am building a new pc for myself and I need a gpu. I will take pretty much any decent gpu no matter how old, I am on a $200 budget for my gpu. i am crurently looking/hoping for a gtx 980 ti since there the only old but are somewhat good.

NO FAKE OFFERS. 

Thanks for your help 

 

Also need Gaming equipment, but don’t have any money for it so I will take any free gaming stuff like old keyboards and old mice anything helps.

Link to post
Share on other sites

We do not allow trades outside of the Classifieds section, which you are not eligible to participate in yet. We do not allow begging.

 

CPU: Intel i7 6700k  | Motherboard: Gigabyte Z170x Gaming 5 | RAM: 2x16GB 3000MHz Corsair Vengeance LPX | GPU: Gigabyte Aorus GTX 1080ti | PSU: Corsair RM750x (2018) | Case: BeQuiet SilentBase 800 | Cooler: Arctic Freezer 34 eSports | SSD: Samsung 970 Evo 500GB + Samsung 840 500GB + Crucial MX500 2TB | Monitor: Acer Predator XB271HU + Samsung BX2450

Link to post
Share on other sites

Is a quadro m2000 better than a gtx 980 ti for cad?

Link to post
Share on other sites

Im not a CAD or Quadro expert but the 980ti will probably run laps around that card

My PC: 

CPU: Intel i5-6600K @ 4.7Ghz Motherboard: EVGA Z170 FTW RAM: 2x8GB Corsair LPX GPU 1: EVGA GTX 1060 FTW GPU 2: MSI R9 270X HAWK Case: NZXT H440 Blue Storage: 120GB PNY, 1TB Hitachi Monitor: Asus VC279 Keyboard: Corsair K95 RGB (MX Brown) Mouse: Logitech G602

Guest PC: 

Spoiler

CPU: AMD FX-8320 Motherboard: Some shit Gigabyte board RAM: 2x4GB G.Skill Ares 2133Mhz GPU: EVGA GTX 570 DoubleShot Case: Idk. Some cheap case Storage: 250GB HDD Monitor: Some NEC thing Keyboard: Logitech G105 Mouse: Some Microsoft mouse

 

Link to post
Share on other sites
1 minute ago, TubsAlwaysWins said:

Im not a CAD or Quadro expert but the 980ti will probably run laps around that card

Nope. It won't 'run circles' around the m2000, which has double floating point performance. On paper the Quadro k2200 that I use is 10% weaker than a Rx 460, but it performs noticeably better in CAD applications such as Cinema 4D, Unity, Blender, and Solidworks.

 

If @Gabin needs CUDA cores and compute performance, go 980ti. If he needs better CAD rendering performance, go m2000.

Is it plugged in? Is it turned on? Are you sure? No, really. 

Link to post
Share on other sites
35 minutes ago, Mel0nMan said:

Nope. It won't 'run circles' around the m2000, which has double floating point performance. On paper the Quadro k2200 that I use is 10% weaker than a Rx 460, but it performs noticeably better in CAD applications such as Cinema 4D, Unity, Blender, and Solidworks.

 

If @Gabin needs CUDA cores and compute performance, go 980ti. If he needs better CAD rendering performance, go m2000.

Interesting. Learn something new every day 🙂

My PC: 

CPU: Intel i5-6600K @ 4.7Ghz Motherboard: EVGA Z170 FTW RAM: 2x8GB Corsair LPX GPU 1: EVGA GTX 1060 FTW GPU 2: MSI R9 270X HAWK Case: NZXT H440 Blue Storage: 120GB PNY, 1TB Hitachi Monitor: Asus VC279 Keyboard: Corsair K95 RGB (MX Brown) Mouse: Logitech G602

Guest PC: 

Spoiler

CPU: AMD FX-8320 Motherboard: Some shit Gigabyte board RAM: 2x4GB G.Skill Ares 2133Mhz GPU: EVGA GTX 570 DoubleShot Case: Idk. Some cheap case Storage: 250GB HDD Monitor: Some NEC thing Keyboard: Logitech G105 Mouse: Some Microsoft mouse

 

Link to post
Share on other sites

What is the best cpu to go with a titan Z gpu?

Link to post
Share on other sites

for what purpose? 

Link to post
Share on other sites

For what use

My PCs:

VALENTINIAN : CPU: Ryzen 7 2700X || CPU COOLER : Corsair H115i Pro || MOBO : MSi B450 Tomahawk Max || GPU: ASUS GTX 1080 Ti Strix OC || RAM: 4x8GB Corsair Vengeance (3200) || SSDs: Samsung 970 Evo 250GB, Samsung 850 Evo 1TB x2 || PSU: EVGA G2 850W w/ Cablemod Black & White Cables || CASE: NZXT H510 White || MONITOR: Acer Predator X34A (1440p 100hz), HP 27yh (1080p 60hz) || KEYBOARD: GameSir GK300 || MOUSE: Logitech G502 Hero || AUDIO: HyperX Cloud Alpha, Logitech C920 || CASE FANS : 2x Corsair ML140, 1x BeQuiet SilentWings 3 120 ||

DIOCLETIAN III (HTPC) : CPU: Ryzen 5 1600 || CPU COOLER : Cooler Master Hyper 212 Black Edition || MOBO : MSi X370 Gaming Pro Carbon || GPU: ASUS GTX 1080 Strix OC || RAM: 2x8GB G.SKILL Ripjaws V (3200) || SSDs: Crucial P1 500GB, Crucial MX500 1TB || HDD: Seagate Barracuda 2TB || PSU: Seasonic 650W w/ Black & Red Extensions || CASE: Phanteks P300 || Monitor: Samsung Q60 65" QLED (4K 60hz) || KEYBOARD: Logitech G613 || Mouse: Logitech G305 || CONTROLLER: Xbox One Controller x2 || AUDIO: Samsung Q60R Soundbar || Case Fans : 2x Cooler Master Masterfan Pro 120, Noctua NF-F12 iPPC-2000 ||

JUSTINIAN - Dell XPS 15": CPU: Core i7-9750H || GPU: GTX 1650 || RAM: 2*8GB 2666MhZ DDR4 SODIMM || SSD: 1TB M.2 PCIe || CASE: 15.6" Laptop with dBrand skin || MONITOR: 15" 1920 * 1080 IPS || KEYBOARD: Dell Keyboard || MOUSE: Logitech G305 White || AUDIO: HyperX Cloud II ||

OTHER : Dell Latitude (i7-6600U, 16GB RAM, 500GB SSD) ||

MOBILE : Galaxy S9 (64GB + 64GB uSD) || Galaxy S7 (32GB) || FitBit Blaze || iPad 7th Generation ||

CONSOLE : Nintendo Switch (Pro Controller x3, Joy-Con Grip x1, PowerA Enhanced Controller x1) ||

Link to post
Share on other sites
22 minutes ago, Gabin said:

What is the best cpu to go with a titan Z gpu?

The use is for cad and occasionally gaming 

Link to post
Share on other sites
1 hour ago, WereCat said:

for what purpose? 

Cad and occasional gaming like Minecraft and csgo 

Link to post
Share on other sites
22 minutes ago, Gabin said:

Cad and occasional gaming like Minecraft and csgo 

Ryzen 5 5600X seems good enough for that. 5800X if you want extra cores. 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×