Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

Help with OC (Mixed ram 3000 & 3200)

Would anyone be so kind to help me with this issue please.

 

So, I have an AMD Ryzen 7 in a ROG CROSSHAIR VI HERO motherboard (up to 3200MHz and beyond when overclocked)

 

I used to have only two Corsair Vengance LPX 3000 Mhz (2x16) and never worried about Mhz untill I had to add more ram.

I cound't find the same, but found a cheaper 3200 Mhz  Dual Corsair Vengance RGB PRO and got'em.

 

I really don't know how to make a stable configuration with both running at 3200 Mhz =(

 

Already tried DOCP Standard 3200 but it was unstable, got a blue screen and had to put in auto again.

So, before tryin others settings I want some advices

 

(also sorry if this post is not in the correct  topic, I'm newbie😅 )

 

Specs.png

2x16.png

1x16 3000.png

Link to post
Share on other sites
8 minutes ago, Kique_Centeno said:

Would anyone be so kind to help me with this issue please.

 

So, I have an AMD Ryzen 7 in a ROG CROSSHAIR VI HERO motherboard (up to 3200MHz and beyond when overclocked)

 

I used to have only two Corsair Vengance LPX 3000 Mhz (2x16) and never worried about Mhz untill I had to add more ram.

I cound't find the same, but found a cheaper 3200 Mhz  Dual Corsair Vengance RGB PRO and got'em.

 

I really don't know how to make a stable configuration with both running at 3200 Mhz =(

 

Already tried DOCP Standard 3200 but it was unstable, got a blue screen and had to put in auto again.

So, before tryin others settings I want some advices

 

(also sorry if this post is not in the correct  topic, I'm newbie😅 )

 

Specs.png

I forget what it was called but there was a program that could give you ram oc numbers for Ryzen, I think Linus mentioned it in a video once. I used it and it worked well.

Link to post
Share on other sites
3 minutes ago, archiso said:

I forget what it was called but there was a program that could give you ram oc numbers for Ryzen, I think Linus mentioned it in a video once. I used it and it worked well.

I believe you are talking about DRAM Calculator for Ryzen, but still I don't really get how to configure independent memories

image.thumb.png.9324c989c78716d227c9dcb846acbd0e.png

Link to post
Share on other sites
7 minutes ago, Kique_Centeno said:

I believe you are talking about DRAM Calculator for Ryzen, but still I don't really get how to configure independent memories

image.thumb.png.9324c989c78716d227c9dcb846acbd0e.png

Oh sorry I didn’t realize that you are trying to configure different speeds per module. I don’t know if you can do that, I tried to find out how a while ago but couldn’t find anything.

Link to post
Share on other sites

You most likely won't be able to run both at 3200Mhz. You generally have to clock down to the lowest common denominator with mismatched RAM.

CPU: AMD Ryzen 9 5900X · Cooler: Noctua NH-U12S chromax.black · Motherboard: MSI MEG X570 Unify · RAM: G.skill Ripjaws V 2x16GB 3600MHz CL16 · Graphics Card: ASUS GeForce RTX 3060 Ti TUF Gaming · Boot Drive: 500GB WD Black SN750 M.2 NVMe SSD · Game Drive: 2TB Crucial MX500 SATA SSD · PSU: EVGA SuperNova 650 G+ 650W 80+ Gold · Case: Fractal Design Meshify C · Monitor: MSI Optix MAG342CQR 34” UWQHD 3440x1440 144Hz

Link to post
Share on other sites
1 minute ago, archiso said:

Oh sorry I didn’t realize that you are trying to configure different speeds per module. I don’t know if you can do that, I tried to find out how a while ago but couldn’t find anything.

Well, not different speeds, both 3000 to 3200 but Im not sure if thats posible either, since 3200 PRO stay at the default, so all 4 rams run at 3200

Link to post
Share on other sites
2 minutes ago, Chris Pratt said:

You most likely won't be able to run both at 3200Mhz. You generally have to clock down to the lowest common denominator with mismatched RAM.

Oh, really? Cant I clock up the lower one then? Or clock up both 3400 or something like that? 

Link to post
Share on other sites
1 minute ago, Kique_Centeno said:

Well, not different speeds, both 3000 to 3200 but Im not sure if thats posible either, since 3200 PRO stay at the default, so all 4 rams run at 3200

I haven’t used an asus board for over clocking before but you should be able to set them all to 3200, I’ve gotten a 3000 mhz kit of vengeance lpx to run at 3200 before so you should be fine.

Link to post
Share on other sites
2 minutes ago, Kique_Centeno said:

Oh, really? Cant I clock up the lower one then? Or clock up both 3400 or something like that? 

you can I have done it.

Link to post
Share on other sites
21 minutes ago, Kique_Centeno said:

Oh, really? Cant I clock up the lower one then? Or clock up both 3400 or something like that? 

You can but you're most likely going to deal with all the timings and voltage. Ready for trouble? If you are, start raising voltage (say 1.4v) and then loosen (i.e. increase) timings.

 

I dont think you will succeed tho. It's 1st gen Ryzen, an older motheboard, a lot of RAM, a lot of sticks and multiple kits at once. Everything that makes overclocking difficult is present.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
1 hour ago, Kique_Centeno said:

Oh, really? Cant I clock up the lower one then? Or clock up both 3400 or something like that? 

RAM is binned to run at the advertised speeds. Sometimes it can clock higher, but not always. If you get lucky maybe, but more often than not it won't be stable. You can always clock down, though. As such, it's far more likely that you'll have to run both at 3000Mhz, than that you're going to get that 3000Mhz kit to 3200Mhz. 3400Mhz is a pipe dream.

CPU: AMD Ryzen 9 5900X · Cooler: Noctua NH-U12S chromax.black · Motherboard: MSI MEG X570 Unify · RAM: G.skill Ripjaws V 2x16GB 3600MHz CL16 · Graphics Card: ASUS GeForce RTX 3060 Ti TUF Gaming · Boot Drive: 500GB WD Black SN750 M.2 NVMe SSD · Game Drive: 2TB Crucial MX500 SATA SSD · PSU: EVGA SuperNova 650 G+ 650W 80+ Gold · Case: Fractal Design Meshify C · Monitor: MSI Optix MAG342CQR 34” UWQHD 3440x1440 144Hz

Link to post
Share on other sites

4 sticks running at 3000 with a 1st gen Ryzen is kind of impossible.

 

What's the exact model- and versionnumber of the sticks. If the versionnumbers are different it's a mission impossible.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×