Fresh build will not start :(

[A6di]

Hi guys.

 

I need help - I have done everything from: https://linustechtips.com/topic/42440-readme-how-to-respond-to-a-no-post-or-no-power-up-situation/

 

I'm currently building a pc for the first time.

 

Specs:

Intel i5 11600K

ROG STRIX Z490-F GAMING

GTX 1070 Ti 8GB (waiting for 3060 ti or a 3070)

Corsair Vengeance LPX DDR4-3600 C18 BK DC - 16GB

Samsung 970 EVO SSD M.2 2280 - 1TB

GIGABYTE P850GM- 850 Watt - 120 mm

NZXT Kraken X63 CPU

NZXT case H510i

 

I have highlighted the places, I have used on the mobo.

 

Earlier today it wouldn't start, but after troubleshooting and almost starting frem bottom, i solved the issue.

Then I tried to BIOS Flashback from USB, as the MOBO is not compliant with lake cpu 11-gen.

 

After it was completed, the PC started and I got POST for the first time: "updating BIOS, do not restart" - it restarted after 20 sec itself > then "ME updating, do not restart" it restarted itself again.

 

Now I cannot start the pc. The rpg light from MOBO is on, and I can see from GPU it gets power (a little light is on).

 

The Q LEDS don't show which key components to check, no light from them.

 

Do you have any recommendations/solutions to try? 

 

Have a great day.

[Misguided Penguin]

You could try clearing or CMOS or since most boards don’t have to boot in order to use the BIOS flashback button you could try that again.

[A6di]

Already tried that couple of times and reinstall everything + bio update.
Also took the Cmos power out for like 10 mins

[Letgomyleghoe]

48 minutes ago, A6di said:

Earlier today it wouldn't start, but after troubleshooting and almost starting frem bottom, i solved the issue.

Then I tried to BIOS Flashback from USB, as the MOBO is not compliant with lake cpu 11-gen.

try flashing again, make sure you follow these directions

https://www.asus.com/support/FAQ/1038568/

and use this bios

https://rog.asus.com/motherboards/rog-strix/rog-strix-z490-f-gaming-model/helpdesk_bios

[A6di]

16 minutes ago, Letgomyleghoe said:

try flashing again, make sure you follow these directions

https://www.asus.com/support/FAQ/1038568/

and use this bios

https://rog.asus.com/motherboards/rog-strix/rog-strix-z490-f-gaming-model/helpdesk_bios

Just done that again, nothing happens, when I push the power button. 
Not fans starts etc.

Only the light from motherboad and GPU is on.

No Q leds, so I can see what to look after

[Letgomyleghoe]

10 minutes ago, A6di said:

Just done that again, nothing happens, when I push the power button. 
Not fans starts etc.

Only the light from motherboad and GPU is on.

No Q leds, so I can see what to look after

your display cable is plugged into the gpu? 

did you rename the file with the tool and move it to the root directory of the drive? have you checked all your connections?

[B.Harr69]

I would make sure there weren't any BIOS updates you needed to do before the most recent one. Sometimes you will have to install a few different ones to get to the most recent one.  Otherwise this is and odd situation. I've had boards not post before because of multiple reasons but I've never had one that posted once and then not again afterwards without changing hardware.

[A6di]

2 hours ago, B.Harr69 said:

I would make sure there weren't any BIOS updates you needed to do before the most recent one. Sometimes you will have to install a few different ones to get to the most recent one.  Otherwise this is and odd situation. I've had boards not post before because of multiple reasons but I've never had one that posted once and then not again afterwards without changing hardware.

Nothing happen..

I have now tried to take out everything from the case.

Tried to start only motherboard and fans. The cables that was connected was:
Power 24-pin and 12-pin
System front panal (power)
2 fans (from the case)

 

Nothing happen. even the power supply fan was of.