Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

I just bought a Galax 3060 Ti,and ive found out that the fans still spin up at idle(30%) and the temps are 42c.Shouldnt it be in 0 rpm mode?

 

 

Link to post
Share on other sites

If it does indeed have a 0RPM mode, when it takes effect will be determined on the default temperature sensor fan curve, not based upon load. If, for example, 0RPM is set to kick in below 30°C, your fans will be running.

Galax doesn't have readily available documentation on any of their 3060ti's that I'm able to find.

~Remember to quote posts to continue support on your thread~
-Don't be this kind of person-

CPU:  Intel  i7-4790k | RAM: 4x4GB G.Skill Ripjaws Z | Cooling: XSPC/EK/Bitspower loop | MOBO: MSI Z97-G45 | PSU: Seasonic Prime 750 Titanium  

SSD: 250GB Crucial MX200 (OS) | 1TB Crucial MX500 | Case: Phanteks Evolv X | GPU: EVGA GTX 1080 Ti FTW3 (with EK Block) | HDD: 1x Seagate Barracuda 2TB

Link to post
Share on other sites
52 minutes ago, Semper said:

If it does indeed have a 0RPM mode, when it takes effect will be determined on the default temperature sensor fan curve, not based upon load. If, for example, 0RPM is set to kick in below 30°C, your fans will be running.

Galax doesn't have readily available documentation on any of their 3060ti's that I'm able to find.

ive tried manually setting the fan curve with msi afterburner but it doesnt seem to take effect?

 

Link to post
Share on other sites
53 minutes ago, Semper said:

If it does indeed have a 0RPM mode, when it takes effect will be determined on the default temperature sensor fan curve, not based upon load. If, for example, 0RPM is set to kick in below 30°C, your fans will be running.

Galax doesn't have readily available documentation on any of their 3060ti's that I'm able to find.

Well, it's on their site under "Specifications" 

 

Quote

Fan stop @ Idle (All Fan)

https://www.galax.com/en/graphics-card/30-series/3060ti-series/geforce-rtx-3060ti-oc.html

 

 

1 hour ago, LeDetructor said:

I just bought a Galax 3060 Ti,and ive found out that the fans still spin up at idle(30%) and the temps are 42c.Shouldnt it be in 0 rpm mode?

 

 

did you set it to maximum performance in ncp or something? 

 

 

Otherwise you may adjust the fancurve with MSI Afterburner to your liking. 

RYZEN 5 3600 @ - 375MV OFFSET | +200HZ PBO| GIGABYTE 3070 VISION OC @ 0.930 V 1965 MHZ CORE 7100 MEMORY | NOCTUA NH-U12S CHROMAX.BLACK | 16GB CORSAIR VENGEANCE LPX 3200 DDR4 | MSI B350M MORTAR| 250GB SAMSUNG EVO 860 | 250GB CRUCIAL MX500| 1TB TOSHIBA SSHD | 120GB KINGSTON SSD | WINDOWS 10 PRO 1809 FOREVER™ | INWIN 301| CORSAIR RM650I | MSI MAG274QRF @165 HZ 2560x1440 ADAPTIVE SYNC | LOGITECH Z906 | DELL KB216T | LOGITECH M185 | SONY DUALSHOCK 4

 

LENOVO IDEAPAD 510 | i5 7200U | 8GB DDR4 | NVIDIA GEFORCE 940MX | 2TB TOSHIBA L200 | WIN 🔟 LITE 

 

Link to post
Share on other sites
49 minutes ago, Mark Kaine said:

Well, it's on their site under "Specifications"

Shows that it has a 0RPM mode, yeah, but there's no documentation on what their default curve begins or ends. It doesn't much help in determining if he's above that thermal threshold.

~Remember to quote posts to continue support on your thread~
-Don't be this kind of person-

CPU:  Intel  i7-4790k | RAM: 4x4GB G.Skill Ripjaws Z | Cooling: XSPC/EK/Bitspower loop | MOBO: MSI Z97-G45 | PSU: Seasonic Prime 750 Titanium  

SSD: 250GB Crucial MX200 (OS) | 1TB Crucial MX500 | Case: Phanteks Evolv X | GPU: EVGA GTX 1080 Ti FTW3 (with EK Block) | HDD: 1x Seagate Barracuda 2TB

Link to post
Share on other sites
26 minutes ago, Semper said:

Shows that it has a 0RPM mode, yeah, but there's no documentation on what their default curve begins or ends. It doesn't much help in determining if he's above that thermal threshold.

yes but in my experience if you use "max performance" (which btw is utterly useless as adaptive does the same minus the negative effects) the default fans will spin while idling generally (depends on temps of course) 

 

PS: depends on the card of course but for example my 1070 will "idle" at around 42-44C so I set Fancurve to start at *45*C, works perfectly it never goes on while idling. And Max  temp is around 49-51C under normal load (aka playing games) funny enough (at around 65-70% fan speeds tbf) 

RYZEN 5 3600 @ - 375MV OFFSET | +200HZ PBO| GIGABYTE 3070 VISION OC @ 0.930 V 1965 MHZ CORE 7100 MEMORY | NOCTUA NH-U12S CHROMAX.BLACK | 16GB CORSAIR VENGEANCE LPX 3200 DDR4 | MSI B350M MORTAR| 250GB SAMSUNG EVO 860 | 250GB CRUCIAL MX500| 1TB TOSHIBA SSHD | 120GB KINGSTON SSD | WINDOWS 10 PRO 1809 FOREVER™ | INWIN 301| CORSAIR RM650I | MSI MAG274QRF @165 HZ 2560x1440 ADAPTIVE SYNC | LOGITECH Z906 | DELL KB216T | LOGITECH M185 | SONY DUALSHOCK 4

 

LENOVO IDEAPAD 510 | i5 7200U | 8GB DDR4 | NVIDIA GEFORCE 940MX | 2TB TOSHIBA L200 | WIN 🔟 LITE 

 

Link to post
Share on other sites
1 hour ago, Mark Kaine said:

yes but in my experience if you use "max performance" (which btw is utterly useless as adaptive does the same minus the negative effects) the default fans will spin while idling generally (depends on temps of course) 

 

PS: depends on the card of course but for example my 1070 will "idle" at around 42-44C so I set Fancurve to start at *45*C, works perfectly it never goes on while idling. And Max  temp is around 49-51C under normal load (aka playing games) funny enough (at around 65-70% fan speeds tbf) 

Ive resetted the ncp settings so the power management is optimal power,i suspect apps using hardware acccelarator but noot sure which

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Newegg

×