I Need Help With Gaming PC, No Signal to Monitor!!!!

[UnluckyMonitor]

Hey,

 

First time posting so I dont know if I selected the right place plus a first time building a gaming pc. But I can not seem to get a signal on my monitor. I got. gtx 1660 super ti and an intel i7, an Asus motherboard skill tridents and a western digital ssd. I dont know why it just won't get a signal to the monitor so I was wondering if anyone can help me with this problem. 

[ChaoticChaosx]

Is the display port or HDMI cable plugged into the GPU?

[RadiatingLight]

Does the computer have any signs of turning on (fans spin, lights on, etc.)

does it boot loop (fans on, then off, then back on)

Which CPU and Motherboard exactly. Many boards nowadays have LEDs to indicate where the problem is

And OFC make sure you have everything plugged in.

[UnluckyMonitor]

27 minutes ago, ChaoticChaosx said:

Is the display port or HDMI cable plugged into the GPU?

Yea, I have it plugged into the graphics card

[UnluckyMonitor]

24 minutes ago, RadiatingLight said:

Does the computer have any signs of turning on (fans spin, lights on, etc.)

does it boot loop (fans on, then off, then back on)

Which CPU and Motherboard exactly. Many boards nowadays have LEDs to indicate where the problem is

And OFC make sure you have everything plugged in.

The fans are all on, graphic cards and everything is all on. The motherboard is Asus TUF gaming Z490-plus and the CPU is intel I7 tenth gen10700K

[UnluckyMonitor]

4 minutes ago, UnluckyMonitor said:

Yea, I have it plugged into the graphics card

Oh and its HDMI

[UnluckyMonitor]

If y'all wanted to have a look here y'all go

[ChaoticChaosx]

33 minutes ago, UnluckyMonitor said:

Yea, I have it plugged into the graphics card

Fans are weirdly set up the "x" is the way the air goes.

If you're going out the top of the chassis then you're good.

 

So does the ram light up or no? If not try one stick at a time. I had a dead ram stick out of a brand new kit before which caused me the same issue.

 

Also when booting are the lights on the side of the board sticking on any color?

 

[UnluckyMonitor]

13 minutes ago, ChaoticChaosx said:

Fans are weirdly set up the "x" is the way the air goes.

If you're going out the top of the chassis then you're good.

 

So does the ram light up or no? If not try one stick at a time. I had a dead ram stick out of a brand new kit before which caused me the same issue.

 

Also when booting are the lights on the side of the board sticking on any color?

 

So I tried the one ram at a time, both the skill tridents aren't lighting up and if you are asking if the motherboard sticks to one color, then it does not. 

[jutrasmobile]

25 minutes ago, UnluckyMonitor said:

So I tried the one ram at a time, both the skill tridents aren't lighting up and if you are asking if the motherboard sticks to one color, then it does not. 

try putting one stick in A2 

[UnluckyMonitor]

1 minute ago, jutrasmobile said:

try putting one stick in A2 

.... I can't do that because there is a big fan in the way of DIMMA2...

[jutrasmobile]

Just now, UnluckyMonitor said:

.... I can't do that because there is a big fan in the way of DIMMA2...

hmmm, I know it sucks but can you remove the cooler install one in A2 remount and try? If you put the stcks in B1 + B2 you will be in single channel anyway (not good).

[jutrasmobile]

1 hour ago, UnluckyMonitor said:

If y'all wanted to have a look here y'all go

read below, will help to find the issue aswell : 

[ChaoticChaosx]

40 minutes ago, UnluckyMonitor said:

So I tried the one ram at a time, both the skill tridents aren't lighting up and if you are asking if the motherboard sticks to one color, then it does not. 

 

I mean as post colors going to boot checking components as above.  As @jutrasmobile said, not a good thing to have it in single channel configuration. Also is it the photo or is the top of the DRAM slots down or up?

Looks up to me.

[RadiatingLight]

Did you mount the cooler correctly? Shouldn't the fans be blowing right to left? Then you can lift the fan and put RAM under it. No cooler should interfere with normal-height DIMMS.

[UnluckyMonitor]

THANK YOU EVERYONE, I GOT IT TO WORK!!!!!