Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

Lian-LI PC-011 Dynamic XL Water Cooling

Hey everyone. building a custom loop in the pc-011 dynamic xl case and have some questions. I will be using two radiators one on the top and one on the bottom with the lian li distro block on the side intake. Question is how should I run my fans through the rads. Thinking of pulling through on the bottom and push out through the top. I am using the lian li unifans. Please give me some suggestions on if both fans should push out or bottom pull in and top push out or something else. Thanks everyone.   

Link to post
Share on other sites
4 minutes ago, Brutis366 said:

Hey everyone. building a custom loop in the pc-011 dynamic xl case and have some questions. I will be using two radiators one on the top and one on the bottom with the lian li distro block on the side intake. Question is how should I run my fans through the rads. Thinking of pulling through on the bottom and push out through the top. I am using the lian li unifans. Please give me some suggestions on if both fans should push out or bottom pull in and top push out or something else. Thanks everyone.   

 

Best (and ideal) configuration is bottom intake, top exhaust.

 

I don't know WHY you would do the opposite -- top intake, bottom exhaust.

Or BOTH top and bottom as exhaust makes even less sense...

Intel Z390 Rig ( *NEW* Primary )

Intel X99 Rig (Officially Decommissioned, Dead CPU returned to Intel)

  • i7-8086K @ 5.1 GHz (still tweaking) -- i7-6800K
  • Gigabyte Z390 Aorus Master -- ASUS X99 Deluxe
  • Sapphire NITRO+ RX 5700 XT Special Edition -- 2x Sapphire NITRO R9-Fury in Crossfire
  • 32GB G.Skill TridentZ DDR4-3000 CL14 (16GB TridentZ RGB + 16GB Red/Black TridentZ)
  • SanDisk 480 GB SSD + 1TB Samsung 860 EVO + 1TB Intel 660p NVMe
  • EVGA SuperNOVA 850W P2 + Red/White CableMod Cables
  • Phanteks Enthoo Luxe Tempered Glass Edition
  • Ekwb Custom loop
  • Logitech G502 Proteus Spectrum + Corsair K70 (Red LED, anodized black, Cheery MX Browns)

Intel Z97 Rig (Secondary)

  • Intel i5-4690K 4.8 GHz
  • ASUS ROG Maximus VII Hero Z97
  • Sapphire Vapor-X HD 7950 EVGA GTX 1070 SC Black Edition ACX 3.0
  • 20 GB (8GB X 2 + 4GB X 1) Corsair Vengeance DDR3 1600 MHz
  • Corsair A50 air cooler  NZXT X61
  • Crucial MX500 1TB SSD + SanDisk Ultra II 240GB SSD + WD Caviar Black 1TB HDD + Kingston V300 120GB SSD [non-gimped version]
  • Antec New TruePower 550W EVGA G2 650W + White CableMod cables
  • Cooler Master HAF 912 White NZXT S340 Elite w/ white LED stips

AMD 990FX Rig (Decommissioned)

  • FX-8350 @ 4.8 / 4.9 GHz (given up on the 5.0 / 5.1 GHz attempt)
  • ASUS ROG Crosshair V Formula 990FX
  • 12 GB (4 GB X 3) G.Skill RipJawsX DDR3 @ 1866 MHz
  • Sapphire Vapor-X HD 7970 + Sapphire Dual-X HD 7970 in Crossfire  Sapphire NITRO R9-Fury in Crossfire *NONE*
  • Thermaltake Frio w/ Cooler Master JetFlo's in push-pull
  • Samsung 850 EVO 500GB SSD + Kingston V300 120GB SSD + WD Caviar Black 1TB HDD
  • Corsair TX850 (ver.1)
  • Cooler Master HAF 932

 

<> Electrical Engineer , B.Eng <>

<> Electronics & Computer Engineering Technologist (Diploma + Advanced Diploma) <>

<> Electronics Engineering Technician for the Canadian Department of National Defence <>

Link to post
Share on other sites

Pull through bottom, push out top. Unless you don't care about your rgb, at which point getting expensive rgb fans would be pretty useless. Ideally you should run push/pull on each radiator for best performance, but that might be a bit cost prohibitive. 

print "Hello World!" ("Hello World!")

Link to post
Share on other sites

Thanks Everyone just installed them pull from the bottom and push out the top. thanks for the input. Ill post pics once done

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×