Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

My Mother's GPU is not screwed into the bracket

Ok so my mother has a gaming computer and has been fine up until this point, there are no problems with the software itself but the problem is that gpu is sagging, there are no screws that are holding it in place (the case is the fractal design meshify c black) and so this has me worrying about the pc and its future, i dont know what screws go into the gpu bracket to screw it in and i dont know what the bag that the screws to hold the gpu in the case are labeled. could anyone help me with this problem?

Link to post
Share on other sites
7 minutes ago, BGGold07 said:

i dont know what screws go into the gpu bracket to screw it in

small black screw like this

 

Mayitr 228Pcs DIY Screw Assortment Kit Computer PC Screws Set With cas –  Bargain Industries

 

If it takes an excessive amount of force to get the screws in, it's the wrong screw but the meshify comes with the screws already installed, holding the slot cowers in

image.png.f20eb9261cb3e92a5cbd29d004bffa7c.png

 

it should be an extremely straightforward process

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k (won) - EVGA Z370 Classified K - G.Kill Trident Z RGB - Force MP500 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G2 650W - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

Linux Proliant ML150 G6:

Dual Xeon X5560 - 24GB ECC DDR3 - GTX 750 TI - old Seagate 1.5TB HDD - Dark moded Ubuntu (and Win7, cuz why not)

 

How many watts do I need? Seasonic Focus threadUserbenchmark (Et al.) is trash explained, PSU misconceptions, protections explainedgroup reg is bad

Link to post
Share on other sites
33 minutes ago, Fasauceome said:

small black screw like this

 

Mayitr 228Pcs DIY Screw Assortment Kit Computer PC Screws Set With cas –  Bargain Industries

 

If it takes an excessive amount of force to get the screws in, it's the wrong screw but the meshify comes with the screws already installed, holding the slot cowers in

image.png.f20eb9261cb3e92a5cbd29d004bffa7c.png

 

it should be an extremely straightforward process

Ok so i dont know where those screws are in my house but i am looking for them right now. but thanks for the help

Link to post
Share on other sites
17 minutes ago, BGGold07 said:

Ok so i dont know where those screws are in my house but i am looking for them right now. but thanks for the help

I do hope you have a place in your closet to tuck away the motherboard and all the case screws/accessories. It does become a rather large pain to lose these things, as you've seen.

 

Although if needed, thumb screws can be rather cheap online. All you need to do is google the size and pitch of the screw and get the same kind.

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k (won) - EVGA Z370 Classified K - G.Kill Trident Z RGB - Force MP500 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G2 650W - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

Linux Proliant ML150 G6:

Dual Xeon X5560 - 24GB ECC DDR3 - GTX 750 TI - old Seagate 1.5TB HDD - Dark moded Ubuntu (and Win7, cuz why not)

 

How many watts do I need? Seasonic Focus threadUserbenchmark (Et al.) is trash explained, PSU misconceptions, protections explainedgroup reg is bad

Link to post
Share on other sites
1 hour ago, BGGold07 said:

Ok so i dont know where those screws are in my house but i am looking for them right now. but thanks for the help

Worst case you can also just remove another slot cover and use the screws from that.

Be sure to QUOTE or TAG me in your reply so I see it!

 

GAMING RIG -----> i7 4790k - GTX 1080 - MSI Z97 Gaming 5 - Fractal Design Define S - LOTS of Noctua cooling

FOLDING RIG ----> i7 2700K - GTX 1070 - GTX 1660 Ti - ASUS something or another motherboard - Antec 900

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Newegg

×