Jump to content

graphics card wont go above 75%

mythical_wyvern

1 day i swappen my ram from slots b1 and b2 to a1 and a2 because i read it was better then when i saw no difference i swapped it back to b1 and b2 but now my gpu wont go above 75-80% utulization

Link to comment
Share on other sites

Link to post
Share on other sites

you made sure the ram is running at the appropriate speed?

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 10 and Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

How many watts do I needATX 3.0 & PCIe 5.0 spec, PSU misconceptions, protections explainedgroup reg is bad

Link to comment
Share on other sites

Link to post
Share on other sites

Check if it actually running on Dual-Channel mode. You can use software like CPU-Z.
image.png.06df1f1f8917e21beb74c272100d56a6.png

| Intel i7-3770@4.2Ghz | Asus Z77-V | Zotac 980 Ti Amp! Omega | DDR3 1800mhz 4GB x4 | 300GB Intel DC S3500 SSD | 512GB Plextor M5 Pro | 2x 1TB WD Blue HDD |
 | Enermax NAXN82+ 650W 80Plus Bronze | Fiio E07K | Grado SR80i | Cooler Master XB HAF EVO | Logitech G27 | Logitech G600 | CM Storm Quickfire TK | DualShock 4 |

Link to comment
Share on other sites

Link to post
Share on other sites

What are you using to measure your GPU utilization? Do you use vsync? Are you CPU-limited in the game you are playing?

 

You should install your RAM according to your motherboard's manual.

BabyBlu (Primary): 

  • CPU: Intel Core i9 9900K @ up to 5.3GHz, 5.0GHz all-core, delidded
  • Motherboard: Asus Maximus XI Hero
  • RAM: G.Skill Trident Z RGB 4x8GB DDR4-3200 @ 4000MHz 16-18-18-34
  • GPU: MSI RTX 2080 Sea Hawk EK X, 2070MHz core, 8000MHz mem
  • Case: Phanteks Evolv X
  • Storage: XPG SX8200 Pro 2TB, 3x ADATASU800 1TB (RAID 0), Samsung 970 EVO Plus 500GB
  • PSU: Corsair HX1000i
  • Display: MSI MPG341CQR 34" 3440x1440 144Hz Freesync, Dell S2417DG 24" 2560x1440 165Hz Gsync
  • Cooling: Custom water loop (CPU & GPU), Radiators: 1x140mm(Back), 1x280mm(Top), 1x420mm(Front)
  • Keyboard: Corsair Strafe RGB (Cherry MX Brown)
  • Mouse: MasterMouse MM710
  • Headset: Corsair Void Pro RGB
  • OS: Windows 10 Pro

Roxanne (Wife Build):

  • CPU: Intel Core i7 4790K @ up to 5.0GHz, 4.8Ghz all-core, relidded w/ LM
  • Motherboard: Asus Z97A
  • RAM: G.Skill Sniper 4x8GB DDR3-2400 @ 10-12-12-24
  • GPU: EVGA GTX 1080 FTW2 w/ LM
  • Case: Corsair Vengeance C70, w/ Custom Side-Panel Window
  • Storage: Samsung 850 EVO 250GB, Samsung 860 EVO 1TB, Silicon Power A80 2TB NVME
  • PSU: Corsair AX760
  • Display: Samsung C27JG56 27" 2560x1440 144Hz Freesync
  • Cooling: Corsair H115i RGB
  • Keyboard: GMMK TKL(Kailh Box White)
  • Mouse: Glorious Model O-
  • Headset: SteelSeries Arctis 7
  • OS: Windows 10 Pro

BigBox (HTPC):

  • CPU: Ryzen 5800X3D
  • Motherboard: Gigabyte B550i Aorus Pro AX
  • RAM: Corsair Vengeance LPX 2x8GB DDR4-3600 @ 3600MHz 14-14-14-28
  • GPU: MSI RTX 3080 Ventus 3X Plus OC, de-shrouded, LM TIM, replaced mem therm pads
  • Case: Fractal Design Node 202
  • Storage: SP A80 1TB, WD Black SN770 2TB
  • PSU: Corsair SF600 Gold w/ NF-A9x14
  • Display: Samsung QN90A 65" (QLED, 4K, 120Hz, HDR, VRR)
  • Cooling: Thermalright AXP-100 Copper w/ NF-A12x15
  • Keyboard/Mouse: Rii i4
  • Controllers: 4X Xbox One & 2X N64 (with USB)
  • Sound: Denon AVR S760H with 5.1.2 Atmos setup.
  • OS: Windows 10 Pro

Harmonic (NAS/Game/Plex/Other Server):

  • CPU: Intel Core i7 6700
  • Motherboard: ASRock FATAL1TY H270M
  • RAM: 64GB DDR4-2133
  • GPU: Intel HD Graphics 530
  • Case: Fractal Design Define 7
  • HDD: 3X Seagate Exos X16 14TB in RAID 5
  • SSD: Inland Premium 512GB NVME, Sabrent 1TB NVME
  • Optical: BDXL WH14NS40 flashed to WH16NS60
  • PSU: Corsair CX450
  • Display: None
  • Cooling: Noctua NH-U14S
  • Keyboard/Mouse: None
  • OS: Windows 10 Pro

NAS:

  • Synology DS216J
  • 2x8TB WD Red NAS HDDs in RAID 1. 8TB usable space
Link to comment
Share on other sites

Link to post
Share on other sites

@mythical_wyvern

Per the manual for Gigabyte B550M-DS3H,

Memory is reccomended to be installed in A2 & B2

image.png.ae8fae3e8b41ca598ee6068ee3fcc9c3.png

 

A & B are each a single channel. You need to have memory in both channels to enable Dual-Channel memory (with associated performance boosts)

 

Source: https://www.gigabyte.com/Motherboard/B550M-DS3H-rev-1x/support#support-manual

Main: AMD Ryzen 7 5800X3D, Nvidia GTX 1080 Ti, 16 GB 4400 MHz DDR4 Fedora 38 x86_64

Secondary: AMD Ryzen 5 5600G, 16 GB 2667 MHz DDR4, Fedora 38 x86_64

Server: AMD Athlon PRO 3125GE, 32 GB 2667 MHz DDR4 ECC, TrueNAS Core 13.0-U5.1

Home Laptop: Intel Core i5-L16G7, 8 GB 4267 MHz LPDDR4x, Windows 11 Home 22H2 x86_64

Work Laptop: Intel Core i7-10510U, NVIDIA Quadro P520, 8 GB 2667 MHz DDR4, Windows 10 Pro 22H2 x86_64

Link to comment
Share on other sites

Link to post
Share on other sites

7 minutes ago, Fasauceome said:

you made sure the ram is running at the appropriate speed?

yes

 

Link to comment
Share on other sites

Link to post
Share on other sites

4 minutes ago, xAcid9 said:

Check if it actually running on Dual-Channel mode. You can use software like CPU-Z.
image.png.06df1f1f8917e21beb74c272100d56a6.png

already did and it does

 

Link to comment
Share on other sites

Link to post
Share on other sites

7 minutes ago, boggy77 said:

should be a2 and b2 btw.

there should be 1 in between and its running in dual i checked

Link to comment
Share on other sites

Link to post
Share on other sites

10 minutes ago, mythical_wyvern said:

1 day i swappen my ram from slots b1 and b2 to a1 and a2 because i read it was better then when i saw no difference i swapped it back to b1 and b2 but now my gpu wont go above 75-80% utulization

its only in some games and i dont know if ram had anything to do with it its just after i swapped ram btw is a 1050 pcb with a ram mounted on it its 4 years old coult it be its just dying?

 

Link to comment
Share on other sites

Link to post
Share on other sites

6 minutes ago, mythical_wyvern said:

its only in some games and i dont know if ram had anything to do with it its just after i swapped ram btw is a 1050 pcb with a ram mounted on it its 4 years old coult it be its just dying?

 

i mean fan

 

Link to comment
Share on other sites

Link to post
Share on other sites

9 minutes ago, mythical_wyvern said:

its only in some games and i dont know if ram had anything to do with it its just after i swapped ram btw is a 1050 pcb with a ram mounted on it its 4 years old coult it be its just dying?

 

You say it is just some games.   Are you sure you just aren't cpu bound at those games?

 

What cpu and what games? What is your CPU utilization like in those games?

I refuse to read threads whose author does not know how to remove the caps lock! 

— Grumpy old man

Link to comment
Share on other sites

Link to post
Share on other sites

18 minutes ago, miagisan said:

You say it is just some games.   Are you sure you just aren't cpu bound at those games?

 

What cpu and what games? What is your CPU utilization like in those games?

It can't be my cpu it's a amd ryzen 5 3600x and it also happens in MC which di don't think is cpu heavy it happens on bf5 mc and cod warzobe usually my cpu utilization is beneath 70% I have watched vids where the 5 3600x wasn't bottlenecking a 2080ti in bf5 it coult be my gpu gets to hot but it only get 60 degrees

Link to comment
Share on other sites

Link to post
Share on other sites

25 minutes ago, miagisan said:

You say it is just some games.   Are you sure you just aren't cpu bound at those games?

 

What cpu and what games? What is your CPU utilization like in those games?

I checked and my gpu downclocks itself so I tried removing the temp limit but dint really fix anything now it's at 80%

Link to comment
Share on other sites

Link to post
Share on other sites

If your RAM is  running in Dual Channel, at spec, it's not the issue.

First check if you're running VSync/GSync/FreeSync or not as that will limit your GPU's load because it won't let your frame rate go above your set refresh rate.  If that's not forced on, try uninstalling your GPU drivers, running DDU uninstaller to clear up any cobwebs the drivers might leave behind, the reinstalling the latest drivers that are supported by your OS/GPU from NVidia or AMD's website.

 

In the future when looking for tech support of this type, it's very helpful to have your system specifications either in your signature, or in the post asking for help, so we know what you're working with.

Save up to 10% on eVGA.com purchases, use my Associates Code: 47AQQ6KPU2IZNXY

My system on ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42686 

Primary Rig:

CPU: AMD 5950X at 4.65GHz 1.275V - Mobo: Asus Crosshair VIII Hero - PSU: eVGA P2 1200W

CPU Cooler: EK Quantum Velocity Block (480mm XE Radiator with push/pull EK Vardar D-RGB fans)

2 x 16GB G.Skill Trident Z Royal 3600MHz CL14 RAM (14-15-15-35-1T at 1.45V)

GPU: eVGA RTX 3090 Kingpin Hybrid - Core @ 2160MHz @ 1068mV, VRAM +1000MHz

Case: Thermaltake View 91 - SSDs/HDDs: Too many to list; Samsung 980 Pro 1TB & 2TB M.2s, Samsung 4TB SATA SSD

Monitor: Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor

Link to comment
Share on other sites

Link to post
Share on other sites

1 hour ago, mythical_wyvern said:

It can't be my cpu it's a amd ryzen 5 3600x and it also happens in MC which di don't think is cpu heavy it happens on bf5 mc and cod warzobe usually my cpu utilization is beneath 70% I have watched vids where the 5 3600x wasn't bottlenecking a 2080ti in bf5 it coult be my gpu gets to hot but it only get 60 degrees

Minecraft is very cpu heavy, and BF5 multiplayer is cpu heavy.   You aren't giving alot of information.   

 

What's the rest of your build, cpu utilization during these games, what is the temp of your cpu while gaming, what are your frame rates like? Do you have vsync on?

 

Minecraft may not use your gpu at 100 percent because it isn't a graphically demanding game.   

I refuse to read threads whose author does not know how to remove the caps lock! 

— Grumpy old man

Link to comment
Share on other sites

Link to post
Share on other sites

22 hours ago, miagisan said:

Minecraft is very cpu heavy, and BF5 multiplayer is cpu heavy.   You aren't giving alot of information.   

 

What's the rest of your build, cpu utilization during these games, what is the temp of your cpu while gaming, what are your frame rates like? Do you have vsync on?

 

Minecraft may not use your gpu at 100 percent because it isn't a graphically demanding game.   

i have a ryzen 5 3600x 16 gb ram 3600 1050 which am gonna replace by a 3070 i have an gigabyte b550m d3sh a cooler master 650 watt bronzo psu and a deep cool aio 

cpu utilization is aorund 60-70% and it stay below 62 degrees but the point is 2 days ago my gpu was sitting at 100% utulization in those games and all of a sudden not anymore

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×