Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

Graphics card pops up

I have a corsair 300r housing. ASRock B460M-HDV does not fit as it has the micro ATX standard. The motherboard is bending. So I have to raise it with a knife so that it does not bend. As a result, the graphics card does not work without this upgrade. How to screw it on?

Link to post
Share on other sites
5 minutes ago, MiloszPL said:

I have a corsair 300r housing. ASRock B460M-HDV does not fit as it has the micro ATX standard. The motherboard is bending. So I have to raise it with a knife so that it does not bend. As a result, the graphics card does not work without this upgrade. How to screw it on?

What graphics card to you have? And, can you provide a photo?

Gaming With a 4:3 CRT

System specs below

 

CPU: AMD Ryzen 5 2600X with a Noctua NH-U9S cooler 
Motherboard: Gigabyte B450 Aorus m
RAM: 16GB (2 x 8GB) of DDR4 GEIL Potenza Evo at 3200Mhz
GPU: EVGA GTX 980 Ti SC Blower Card
HDD: 7200RPM TOSHIBA DT01ACA100 1TB, External HDD: 5400RPM 2TB WD My Passport
SSD: NONE, eveything works fine, no need to upgrade, stop telling me I need an SSD.
PSU: Corsair CX650M
Displays: ViewSonic VA2012WB LCD 1680x1050p @ 75Hz,
Gateway VX920 CRT: 1920x1440@65Hz, 1600x1200@75Hz, 1200x900@100Hz, 960x720@125Hz
Gateway VX900 CRT: 1920x1440@64Hz, 1600x1200@75Hz, 1200x900@100Hz, 960x720@120Hz
(Yes, I use a CRT and I prefer gaming on one)
 
Cooling: Grill with filter installed onto the front panel for air intake cooling with a 120mm Corsair ML120 fan and an old recycled 92mm cooler master(forgot model) fan for exhaust.
 
Keyboard: Thermaltake eSPORTS MEKA PRO with Cherry MX Red switches
Link to post
Share on other sites
4 minutes ago, MadAnt250 said:

Jaką masz kartę graficzną? Czy mogę dostarczyć zdjęcie?

gtx 980ti

Link to post
Share on other sites
Just now, MiloszPL said:

gtx 980ti

Which model? There are many 980 ti's with different designs and coolers.

Gaming With a 4:3 CRT

System specs below

 

CPU: AMD Ryzen 5 2600X with a Noctua NH-U9S cooler 
Motherboard: Gigabyte B450 Aorus m
RAM: 16GB (2 x 8GB) of DDR4 GEIL Potenza Evo at 3200Mhz
GPU: EVGA GTX 980 Ti SC Blower Card
HDD: 7200RPM TOSHIBA DT01ACA100 1TB, External HDD: 5400RPM 2TB WD My Passport
SSD: NONE, eveything works fine, no need to upgrade, stop telling me I need an SSD.
PSU: Corsair CX650M
Displays: ViewSonic VA2012WB LCD 1680x1050p @ 75Hz,
Gateway VX920 CRT: 1920x1440@65Hz, 1600x1200@75Hz, 1200x900@100Hz, 960x720@125Hz
Gateway VX900 CRT: 1920x1440@64Hz, 1600x1200@75Hz, 1200x900@100Hz, 960x720@120Hz
(Yes, I use a CRT and I prefer gaming on one)
 
Cooling: Grill with filter installed onto the front panel for air intake cooling with a 120mm Corsair ML120 fan and an old recycled 92mm cooler master(forgot model) fan for exhaust.
 
Keyboard: Thermaltake eSPORTS MEKA PRO with Cherry MX Red switches
Link to post
Share on other sites

White housing. He's a clerk. The point is, the case doesn't secure the plate and it bends. There is no room for one screw in the housing, because the hole is nearby. By tightening the plate, it also bends.

Link to post
Share on other sites
16 minutes ago, MiloszPL said:

The motherboard is bending.

does the case use standoffs?

are the standoffs in the right position for mATX motherboard?

i dont think i've seen any ATX cases that doesnt also support mATX boards.

Things I need help with:

Spoiler

none atm

 

I hate Intel's pricing, Ryzen's weird quirks, Nvidia's pricing, and Radeon GPUs in general

 

Spoiler

 

Products I like:

Spoiler

Sony Xperia Z1 / Z2 / 10 ii, Asus Strix 970 / 1070, Samsung SSD, WD HDD, Corsair PSUs (AX, RM, CX(grey)), GeForce GPU, NZXT N450/S340, be quiet! Coolers, G.Skill Trident RAM, Logitech M525, Logitech G440, Razer Deathadder Elite

 

Products I hate:

Spoiler

Xperia Z3, XiaoMi 5c, Radeon GPUs, Razer Audio Products, any bloatwares

 

Companies I absolutely adore: (and hope it stays that way)

Spoiler

be quiet! - sent me AM4 mounting for my DRP3 even though it's way past the timeframe stated, no questions asked

Corsair - very good RMA experience, absolutely recommend

 

Companies I hate:

Spoiler

Nvidia, Intel, Apple, TMT (Thundermatch, a retailer)

 

Personal Blacklisted Companies:

Spoiler

Acer: shit tier quality products, shit tier customer service thus far, they "tried" to solve my issue but they arent really doing anything but delaying and delaying. (on-going case since July)

Gigabyte: horrible customer service (gigabyte had literally 0 customer service, asked me to go to retailer with NO WAY to email them about a question) but at least they fixed my shit in ONE MONTH (would probably take me 1 hour to fix if they let me email them)

XiaoMi Phones: built like a tank but the software is buggy as all hell

Seagate HDD: had too many dead seagate drives

Kingston SSD: 300V controller swap thingy

Razer (except their mouse)

 

Remember, just because I had good/bad experiences with these companies/product, doesn't mean you will have similar experiences too. I would still recommend these products if they made sense for your needs, but I'll add a disclaimer of my experience if it's relevant. Feel free to DM me asking why they are where they are.

 

 

Link to post
Share on other sites
3 minutes ago, MiloszPL said:

gtx 980ti

Did you install the pci cover screws?

Gaming With a 4:3 CRT

System specs below

 

CPU: AMD Ryzen 5 2600X with a Noctua NH-U9S cooler 
Motherboard: Gigabyte B450 Aorus m
RAM: 16GB (2 x 8GB) of DDR4 GEIL Potenza Evo at 3200Mhz
GPU: EVGA GTX 980 Ti SC Blower Card
HDD: 7200RPM TOSHIBA DT01ACA100 1TB, External HDD: 5400RPM 2TB WD My Passport
SSD: NONE, eveything works fine, no need to upgrade, stop telling me I need an SSD.
PSU: Corsair CX650M
Displays: ViewSonic VA2012WB LCD 1680x1050p @ 75Hz,
Gateway VX920 CRT: 1920x1440@65Hz, 1600x1200@75Hz, 1200x900@100Hz, 960x720@125Hz
Gateway VX900 CRT: 1920x1440@64Hz, 1600x1200@75Hz, 1200x900@100Hz, 960x720@120Hz
(Yes, I use a CRT and I prefer gaming on one)
 
Cooling: Grill with filter installed onto the front panel for air intake cooling with a 120mm Corsair ML120 fan and an old recycled 92mm cooler master(forgot model) fan for exhaust.
 
Keyboard: Thermaltake eSPORTS MEKA PRO with Cherry MX Red switches
Link to post
Share on other sites
27 minutes ago, MiloszPL said:

I have a corsair 300r housing. ASRock B460M-HDV does not fit as it has the micro ATX standard. The motherboard is bending. So I have to raise it with a knife so that it does not bend. As a result, the graphics card does not work without this upgrade. How to screw it on?

Need more information and pictures.

Link to post
Share on other sites
8 minutes ago, MiloszPL said:

White housing. He's a clerk. The point is, the case doesn't secure the plate and it bends. There is no room for one screw in the housing, because the hole is nearby. By tightening the plate, it also bends.

A photo would help with understand what is happening.

Gaming With a 4:3 CRT

System specs below

 

CPU: AMD Ryzen 5 2600X with a Noctua NH-U9S cooler 
Motherboard: Gigabyte B450 Aorus m
RAM: 16GB (2 x 8GB) of DDR4 GEIL Potenza Evo at 3200Mhz
GPU: EVGA GTX 980 Ti SC Blower Card
HDD: 7200RPM TOSHIBA DT01ACA100 1TB, External HDD: 5400RPM 2TB WD My Passport
SSD: NONE, eveything works fine, no need to upgrade, stop telling me I need an SSD.
PSU: Corsair CX650M
Displays: ViewSonic VA2012WB LCD 1680x1050p @ 75Hz,
Gateway VX920 CRT: 1920x1440@65Hz, 1600x1200@75Hz, 1200x900@100Hz, 960x720@125Hz
Gateway VX900 CRT: 1920x1440@64Hz, 1600x1200@75Hz, 1200x900@100Hz, 960x720@120Hz
(Yes, I use a CRT and I prefer gaming on one)
 
Cooling: Grill with filter installed onto the front panel for air intake cooling with a 120mm Corsair ML120 fan and an old recycled 92mm cooler master(forgot model) fan for exhaust.
 
Keyboard: Thermaltake eSPORTS MEKA PRO with Cherry MX Red switches
Link to post
Share on other sites
13 minutes ago, Internet Person said:

Need more information and pictures.

 

23 minutes ago, MiloszPL said:

White housing. He's a clerk. The point is, the case doesn't secure the plate and it bends. There is no room for one screw in the housing, because the hole is nearby. By tightening the plate, it also bends.

 

Napisz po Polsku. Zalacz jakies zdjecia.

Link to post
Share on other sites
10 minutes ago, Internet Person said:

 

 

Napisz po Polsku bo nic nie rozumiem. Zalacz jakies zdjecia.

is

007.jpg

Link to post
Share on other sites
20 minutes ago, MiloszPL said:

is

007.jpg

Check the latch/locking tab for the pcie slot.

Gaming With a 4:3 CRT

System specs below

 

CPU: AMD Ryzen 5 2600X with a Noctua NH-U9S cooler 
Motherboard: Gigabyte B450 Aorus m
RAM: 16GB (2 x 8GB) of DDR4 GEIL Potenza Evo at 3200Mhz
GPU: EVGA GTX 980 Ti SC Blower Card
HDD: 7200RPM TOSHIBA DT01ACA100 1TB, External HDD: 5400RPM 2TB WD My Passport
SSD: NONE, eveything works fine, no need to upgrade, stop telling me I need an SSD.
PSU: Corsair CX650M
Displays: ViewSonic VA2012WB LCD 1680x1050p @ 75Hz,
Gateway VX920 CRT: 1920x1440@65Hz, 1600x1200@75Hz, 1200x900@100Hz, 960x720@125Hz
Gateway VX900 CRT: 1920x1440@64Hz, 1600x1200@75Hz, 1200x900@100Hz, 960x720@120Hz
(Yes, I use a CRT and I prefer gaming on one)
 
Cooling: Grill with filter installed onto the front panel for air intake cooling with a 120mm Corsair ML120 fan and an old recycled 92mm cooler master(forgot model) fan for exhaust.
 
Keyboard: Thermaltake eSPORTS MEKA PRO with Cherry MX Red switches
Link to post
Share on other sites
22 minutes ago, MiloszPL said:

is

 

You don't have a better picture? This looks like a bad situation, I don't like that knife - you will break something. Don't power on the PC until you figure this out. Take everything out: the video card and the motherboard. Make sure that you have the correct number of standoffs that align with the holes in the motherboard.

 

Also, make sure the I/O shield is inserted in all the way in. You may need to push it really hard until all four sides snap into the case.

 

Is there anything else between the edges of the board and the case? Like a bent PCI slot cover, or something?

 

is the case bent?

 

There is something preventing the board from aligning with the standoffs.

Link to post
Share on other sites

Unfortunately, there is nothing else. One screw entry is missing and the other is missing. The size of my thumb has become between the motherboard and the case.

Link to post
Share on other sites
4 minutes ago, MadAnt250 said:

Check the latch/locking tab for the pcie slot.

 

Just now, MiloszPL said:

Unfortunately, there is nothing else. One screw entry is missing and the other is missing. The size of my thumb has become between the motherboard and the case.

 

Gaming With a 4:3 CRT

System specs below

 

CPU: AMD Ryzen 5 2600X with a Noctua NH-U9S cooler 
Motherboard: Gigabyte B450 Aorus m
RAM: 16GB (2 x 8GB) of DDR4 GEIL Potenza Evo at 3200Mhz
GPU: EVGA GTX 980 Ti SC Blower Card
HDD: 7200RPM TOSHIBA DT01ACA100 1TB, External HDD: 5400RPM 2TB WD My Passport
SSD: NONE, eveything works fine, no need to upgrade, stop telling me I need an SSD.
PSU: Corsair CX650M
Displays: ViewSonic VA2012WB LCD 1680x1050p @ 75Hz,
Gateway VX920 CRT: 1920x1440@65Hz, 1600x1200@75Hz, 1200x900@100Hz, 960x720@125Hz
Gateway VX900 CRT: 1920x1440@64Hz, 1600x1200@75Hz, 1200x900@100Hz, 960x720@120Hz
(Yes, I use a CRT and I prefer gaming on one)
 
Cooling: Grill with filter installed onto the front panel for air intake cooling with a 120mm Corsair ML120 fan and an old recycled 92mm cooler master(forgot model) fan for exhaust.
 
Keyboard: Thermaltake eSPORTS MEKA PRO with Cherry MX Red switches
Link to post
Share on other sites
2 minutes ago, MiloszPL said:

Unfortunately, there is nothing else. One screw entry is missing and the other is missing. The size of my thumb has become between the motherboard and the case.

There must be something there. You're missing the standoffs? Read my post above and remove everything and carefully analyze the situation.

Link to post
Share on other sites

I checked many times. Without the knife, the pc won't start

Link to post
Share on other sites
2 minutes ago, Internet Person said:

There must be something there. You're missing the standoffs? Read my post above and remove everything and carefully analyze the situation.

I do not have spacers, because they were used to mount the old msi z97 gaming 3 motherboard. They cannot be removed.

Link to post
Share on other sites
Just now, MiloszPL said:

I checked many times. Without the knife, the pc won't start.

Yes, but did you remove the board, as I suggested, and checked the standoffs and the I/O shield? You have to find what is pushing on the board. Take a break, get some sleep and try to do it over tomorrow. You may be missing something.  I've never seen a case or a mobo with misaligned holes. You're missing something.

Link to post
Share on other sites

I checked for hours today. I was looking for. The computer was installed 5 years ago in the service. I don't know how many pins were in the set.

Link to post
Share on other sites
12 minutes ago, MiloszPL said:

I do not have spacers, because they were used to mount the old msi z97 gaming 3 motherboard. They cannot be removed.

Spacers? You mean the standoffs? This???

screenshot.1602900202.jpg.75d5ae537476480b97afcbd276f36538.jpg

 

I just thought of something: I think we're getting somewhere: if the standoffs are missing then yeah, the board will bend down under the weight of the video card. Then the card may slide slightly out of the PCIe slot. That's why lifting it with a knife helps.

 

I gotta go now. Will check tomorrow.

Link to post
Share on other sites
2 minutes ago, Internet Person said:

Jakoś podwójny post, przepraszam, zmęczony.

okay. I took a picture of what I have

Link to post
Share on other sites
Just now, MiloszPL said:

okay. I took a picture of what I have

Plyta sie wygina jak na nia naciszkasz, bo pod spodem brakuje wsparcia? Czy tak? Brakuje ci pewnie standoffs, czy jak je nazwales spacers.

Odpowiem jutro.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Newegg

×