Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

Will Arctic P12 be quieter than Fractal Dynamic GP 12?

1 minute ago, Tristerin said:

DC control via the motherboard BIOS, check to see (go into BIOS now) to see what functionality it has - my B450 and B350 boards have DC control (ASRock and ASUS) so I would assume your board has this as well.  With DC control there is a threshold unique to each fan type that it may not run at all under a certain low level of power it is given (like 50% speed and lower will result in it not turning the fan on at all, for example)

I believe it says Voltage Control on Smart Fan settings. 

Ryzen 5 3600 4.0GHz 1.1V | 16GB @ 3600MHz | GTX 1070 8GB | Corsair RMx 650W | Fractal Meshify C

Link to post
Share on other sites
10 minutes ago, Rogerzz said:

I believe it says Voltage Control on Smart Fan settings. 

That should be it, click around, swap it to DC and mess with fan curves just to get used to it.

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MS30 M.2 SATA III, CoolerMaster HAF XM Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Viotek GN24C 24" 1080p 144hz curved and Hannspree HF207 as 2nd monitor

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out (getting its facelift as of June 2020 have new air cooler, drives etc.  About 60% finished.  Will no longer be a closed loop system.  Slight update, upgraded to larger SSD, and air cooling installed Arctic Alpine cooler.

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, Corsair H100i GTX 240mm AIO w/ 12mm thick fans to fit in top exhaust, 256gb TIMETEC SSD, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman gaming mouse

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 2x4gb DDR3 1600, Team Group 120gb SSD, 500gb Seagate 7mm HDD attached storage, Windows 10 Pro, Logitech K400+, USB Wifi adapter all vesa mounted to the back of a 37" 1080p TV 

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 4gb ram tinker toy at the moment.  Running Manjaro XFCE at the moment.

Home Security: ZOSI 8 channel CCTV (4 used at this time, 1080p) DVR H.265+, 3tb HGST Enterprise HDD, ASUS monitor for display

Link to post
Share on other sites
Just now, Tristerin said:

That should be it, click around, swap it to DC and mess with fan curves just to get used to it.

so i should be able to control non pwm fans with DC mode with temps?

Ryzen 5 3600 4.0GHz 1.1V | 16GB @ 3600MHz | GTX 1070 8GB | Corsair RMx 650W | Fractal Meshify C

Link to post
Share on other sites
1 minute ago, Rogerzz said:

so i should be able to control non pwm fans with DC mode with temps?

Yes, thats what its for

 

PWM = pulse width modulation - type of power delivery in pulses

DC = Direct current, just have to figure out at what threshold a fan cant operate at all without enough current - most fans I believe its around 50% DC power they cant operate.

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MS30 M.2 SATA III, CoolerMaster HAF XM Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Viotek GN24C 24" 1080p 144hz curved and Hannspree HF207 as 2nd monitor

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out (getting its facelift as of June 2020 have new air cooler, drives etc.  About 60% finished.  Will no longer be a closed loop system.  Slight update, upgraded to larger SSD, and air cooling installed Arctic Alpine cooler.

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, Corsair H100i GTX 240mm AIO w/ 12mm thick fans to fit in top exhaust, 256gb TIMETEC SSD, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman gaming mouse

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 2x4gb DDR3 1600, Team Group 120gb SSD, 500gb Seagate 7mm HDD attached storage, Windows 10 Pro, Logitech K400+, USB Wifi adapter all vesa mounted to the back of a 37" 1080p TV 

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 4gb ram tinker toy at the moment.  Running Manjaro XFCE at the moment.

Home Security: ZOSI 8 channel CCTV (4 used at this time, 1080p) DVR H.265+, 3tb HGST Enterprise HDD, ASUS monitor for display

Link to post
Share on other sites
Just now, Tristerin said:

Yes, thats what its for

just wanted to make sure before i splurge on fans

Ryzen 5 3600 4.0GHz 1.1V | 16GB @ 3600MHz | GTX 1070 8GB | Corsair RMx 650W | Fractal Meshify C

Link to post
Share on other sites
Just now, Rogerzz said:

just wanted to make sure before i splurge on fans

100% understandable, Id say you will be more surprised on how quiet they are at full tilt that you will likely just let them run at 100%

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MS30 M.2 SATA III, CoolerMaster HAF XM Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Viotek GN24C 24" 1080p 144hz curved and Hannspree HF207 as 2nd monitor

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out (getting its facelift as of June 2020 have new air cooler, drives etc.  About 60% finished.  Will no longer be a closed loop system.  Slight update, upgraded to larger SSD, and air cooling installed Arctic Alpine cooler.

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, Corsair H100i GTX 240mm AIO w/ 12mm thick fans to fit in top exhaust, 256gb TIMETEC SSD, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman gaming mouse

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 2x4gb DDR3 1600, Team Group 120gb SSD, 500gb Seagate 7mm HDD attached storage, Windows 10 Pro, Logitech K400+, USB Wifi adapter all vesa mounted to the back of a 37" 1080p TV 

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 4gb ram tinker toy at the moment.  Running Manjaro XFCE at the moment.

Home Security: ZOSI 8 channel CCTV (4 used at this time, 1080p) DVR H.265+, 3tb HGST Enterprise HDD, ASUS monitor for display

Link to post
Share on other sites
58 minutes ago, Tristerin said:

100% understandable, Id say you will be more surprised on how quiet they are at full tilt that you will likely just let them run at 100%

is it worth just to replace my stock 120mm front fan with a p12 for £5 or go ahead with the 140mm x 2 plan?

Ryzen 5 3600 4.0GHz 1.1V | 16GB @ 3600MHz | GTX 1070 8GB | Corsair RMx 650W | Fractal Meshify C

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×