Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

Will Arctic P12 be quieter than Fractal Dynamic GP 12?

So I want to replace the stock front fan in my Meshify C because it makes an annoying motor noise.

 

Will two Arctic P12s be quieter and perform better? 

Ryzen 5 3600 4.0GHz 1.1V | 16GB @ 3600MHz | GTX 1070 8GB | Corsair RMx 650W | Fractal Meshify C

Link to post
Share on other sites
7 minutes ago, Rogerzz said:

So I want to replace the stock front fan in my Meshify C because it makes an annoying motor noise.

 

Will two Arctic P12s be quieter and perform better? 

The p12's are basically the standard noctua's. So yeah more performance for less noise is going to happen. However the p12's are focused airflow fans whilst the f12's are unfocused airflow fans. So depending on what you want to do get the correct ones.

Link to post
Share on other sites
Just now, jaslion said:

The p12's are basically the standard noctua's. So yeah more performance for less noise is going to happen. However the p12's are focused airflow fans whilst the f12's are unfocused airflow fans. So depending on what you want to do get the correct ones.

I want something good to replace the crappy loud stock fan that's all. I have been recommended the 5 pack P12s as they come with splitters, however they aren't stocked at the moment.

Ryzen 5 3600 4.0GHz 1.1V | 16GB @ 3600MHz | GTX 1070 8GB | Corsair RMx 650W | Fractal Meshify C

Link to post
Share on other sites
25 minutes ago, Rogerzz said:

I want something good to replace the crappy loud stock fan that's all. I have been recommended the 5 pack P12s as they come with splitters, however they aren't stocked at the moment.

oof, they were in stock this morning https://old.reddit.com/r/buildapcsales/comments/j03b3g/fan_arctic_p14_pwm_pst_value_pack_5_fans_3295/

 

theyre probably the best all-around fans you can get for <20 bucks apiece

topics i need help on:

Spoiler

 

 

my "oops i bought intel right before zen 3 releases" build

CPU: Ryzen 5 3600 (placeholder)

GPU: Gigabyte 980ti Xtreme (also placeholder), deshroud w/ generic 1200rpm 120mm fans x2, stock bios 130% power, no voltage offset: +70 core +400 mem 

Memory: 2x16gb GSkill Trident Z RGB 3600C16, 14-15-30-288@1.45v

Motherboard: Asus ROG Strix X570-E Gaming

Cooler: Noctua NH-D15S w/ white chromax bling
OS Drive: Samsung PM981 1tb (OEM 970 Evo)

Storage Drive: XPG SX8200 Pro 2tb

Backup Storage: Seagate Barracuda Compute 4TB

PSU: Seasonic Prime Ultra Titanium 750W w/ black/white Cablemod extensions
Case: Fractal Design Meshify C Dark (to be replaced with a good case shortly)

basically everything was bought used off of reddit or here, only new component was the case. absolutely nutty deals for some of these parts, ill have to tally it all up once it's "done" :D 

Link to post
Share on other sites
Just now, VeganJoy said:

oof, they were in stock this morning https://old.reddit.com/r/buildapcsales/comments/j03b3g/fan_arctic_p14_pwm_pst_value_pack_5_fans_3295/

 

theyre probably the best all-around fans you can get for <20 bucks apiece

I live in the UK. The P14s can  be picked up for the same price as P12s currently.

 

Are P14s better for £26? ($33)

Ryzen 5 3600 4.0GHz 1.1V | 16GB @ 3600MHz | GTX 1070 8GB | Corsair RMx 650W | Fractal Meshify C

Link to post
Share on other sites

Check ebay, Arctic P12 value packs (5 fans) regularly sell for sub $30 shipped in the US.

 

I only use Arctic P and Fs anymore, price to performance is amazing.

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MS30 M.2 SATA III, CoolerMaster HAF XM Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Viotek GN24C 24" 1080p 144hz curved and Hannspree HF207 as 2nd monitor

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out (getting its facelift as of June 2020 have new air cooler, drives etc.  About 60% finished.  Will no longer be a closed loop system.  Slight update, upgraded to larger SSD, and air cooling installed Arctic Alpine cooler.

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, Corsair H100i GTX 240mm AIO w/ 12mm thick fans to fit in top exhaust, 256gb TIMETEC SSD, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman gaming mouse

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 2x4gb DDR3 1600, Team Group 120gb SSD, 500gb Seagate 7mm HDD attached storage, Windows 10 Pro, Logitech K400+, USB Wifi adapter all vesa mounted to the back of a 37" 1080p TV 

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 4gb ram tinker toy at the moment.  Running Manjaro XFCE at the moment.

Home Security: ZOSI 8 channel CCTV (4 used at this time, 1080p) DVR H.265+, 3tb HGST Enterprise HDD, ASUS monitor for display

Link to post
Share on other sites
1 minute ago, Rogerzz said:

I live in the UK. The P14s can  be picked up for the same price as P12s currently.

 

Are P14s better for £26? ($33)

P14 are 140mm, if your case can fit them

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MS30 M.2 SATA III, CoolerMaster HAF XM Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Viotek GN24C 24" 1080p 144hz curved and Hannspree HF207 as 2nd monitor

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out (getting its facelift as of June 2020 have new air cooler, drives etc.  About 60% finished.  Will no longer be a closed loop system.  Slight update, upgraded to larger SSD, and air cooling installed Arctic Alpine cooler.

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, Corsair H100i GTX 240mm AIO w/ 12mm thick fans to fit in top exhaust, 256gb TIMETEC SSD, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman gaming mouse

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 2x4gb DDR3 1600, Team Group 120gb SSD, 500gb Seagate 7mm HDD attached storage, Windows 10 Pro, Logitech K400+, USB Wifi adapter all vesa mounted to the back of a 37" 1080p TV 

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 4gb ram tinker toy at the moment.  Running Manjaro XFCE at the moment.

Home Security: ZOSI 8 channel CCTV (4 used at this time, 1080p) DVR H.265+, 3tb HGST Enterprise HDD, ASUS monitor for display

Link to post
Share on other sites
Just now, Tristerin said:

Check ebay, Arctic P12 value packs (5 fans) regularly sell for sub $30 shipped in the US.

 

I only use Arctic P and Fs anymore, price to performance is amazing.

Will Arctic P14 be better as I can get them for less than P12s here in the UK?

Ryzen 5 3600 4.0GHz 1.1V | 16GB @ 3600MHz | GTX 1070 8GB | Corsair RMx 650W | Fractal Meshify C

Link to post
Share on other sites
Just now, Rogerzz said:

Will Arctic P14 be better as I can get them for less than P12s here in the UK?

Without looking up your case, if they fit, I always go with the largest can I can slot there.  P14 is 140mm, P12 is 120mm fans

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MS30 M.2 SATA III, CoolerMaster HAF XM Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Viotek GN24C 24" 1080p 144hz curved and Hannspree HF207 as 2nd monitor

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out (getting its facelift as of June 2020 have new air cooler, drives etc.  About 60% finished.  Will no longer be a closed loop system.  Slight update, upgraded to larger SSD, and air cooling installed Arctic Alpine cooler.

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, Corsair H100i GTX 240mm AIO w/ 12mm thick fans to fit in top exhaust, 256gb TIMETEC SSD, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman gaming mouse

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 2x4gb DDR3 1600, Team Group 120gb SSD, 500gb Seagate 7mm HDD attached storage, Windows 10 Pro, Logitech K400+, USB Wifi adapter all vesa mounted to the back of a 37" 1080p TV 

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 4gb ram tinker toy at the moment.  Running Manjaro XFCE at the moment.

Home Security: ZOSI 8 channel CCTV (4 used at this time, 1080p) DVR H.265+, 3tb HGST Enterprise HDD, ASUS monitor for display

Link to post
Share on other sites
1 minute ago, Tristerin said:

Without looking up your case, if they fit, I always go with the largest can I can slot there.  P14 is 140mm, P12 is 120mm fans

It's a Meshify C, the bottom slot cannot be used because of HDD tray.

 

Can I use just the two 140mm in front and not use all 5? Will there be a fan splitter issue?

Ryzen 5 3600 4.0GHz 1.1V | 16GB @ 3600MHz | GTX 1070 8GB | Corsair RMx 650W | Fractal Meshify C

Link to post
Share on other sites
Just now, Rogerzz said:

It's a Meshify C, the bottom slot cannot be used because of HDD tray.

 

Can I use just the two 140mm in front and not use all 5? Will there be a fan splitter issue?

Just to make sure Im tracking - you are looking at getting the value pack P14's which include 5 fans?  

 

I just looked up the case, supports 2x front intake 140mm so yes I would use 2 as front intake.  If the top and rear support 140mm fans I would slot them there as well.  If you have splitters then you can support 3 fans per motherboard header

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MS30 M.2 SATA III, CoolerMaster HAF XM Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Viotek GN24C 24" 1080p 144hz curved and Hannspree HF207 as 2nd monitor

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out (getting its facelift as of June 2020 have new air cooler, drives etc.  About 60% finished.  Will no longer be a closed loop system.  Slight update, upgraded to larger SSD, and air cooling installed Arctic Alpine cooler.

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, Corsair H100i GTX 240mm AIO w/ 12mm thick fans to fit in top exhaust, 256gb TIMETEC SSD, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman gaming mouse

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 2x4gb DDR3 1600, Team Group 120gb SSD, 500gb Seagate 7mm HDD attached storage, Windows 10 Pro, Logitech K400+, USB Wifi adapter all vesa mounted to the back of a 37" 1080p TV 

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 4gb ram tinker toy at the moment.  Running Manjaro XFCE at the moment.

Home Security: ZOSI 8 channel CCTV (4 used at this time, 1080p) DVR H.265+, 3tb HGST Enterprise HDD, ASUS monitor for display

Link to post
Share on other sites
1 minute ago, Tristerin said:

Just to make sure Im tracking - you are looking at getting the value pack P14's which include 5 fans?  

 

I just looked up the case, supports 2x front intake 140mm so yes I would use 2 as front intake.  If the top and rear support 140mm fans I would slot them there as well.  If you have splitters then you can support 3 fans per motherboard header

Yes, the value P14 pack is cheaper than getting 2 of them individually.

 

Would you say just the two front fans will be ok, 4 seems excessive imo.

Ryzen 5 3600 4.0GHz 1.1V | 16GB @ 3600MHz | GTX 1070 8GB | Corsair RMx 650W | Fractal Meshify C

Link to post
Share on other sites
9 minutes ago, Tristerin said:

Just to make sure Im tracking - you are looking at getting the value pack P14's which include 5 fans?  

 

I just looked up the case, supports 2x front intake 140mm so yes I would use 2 as front intake.  If the top and rear support 140mm fans I would slot them there as well.  If you have splitters then you can support 3 fans per motherboard header

will the P14s be quieter than the P12s i guess? Cant find any real comparisons

Ryzen 5 3600 4.0GHz 1.1V | 16GB @ 3600MHz | GTX 1070 8GB | Corsair RMx 650W | Fractal Meshify C

Link to post
Share on other sites
4 minutes ago, Rogerzz said:

Yes, the value P14 pack is cheaper than getting 2 of them individually.

 

Would you say just the two front fans will be ok, 4 seems excessive imo.

Depends on who you are as a person lol  

 

Heres me:

 

Two PCs sitting next to me right now 2.5 feet away max

 

6x Arctic P12 as intake (4x one PC, 2x other PC)

8x Arctic P12 as exhaust (6x one PC, 2x other PC)

1x Thermaltake 200mm as intake (side intake 1 PC)

1x Rosewill 140mm as side intake (other PC)

1x CM and 1x Cougar 120mm fans exhaust (2x other PC)

1x Arctic F8 as top intake pointing at VRMs (closest PC)

 

Lots of radiators involved

 

The sound is pleasent, not loud, and my PCs run mid/low 50c under full load.  Im folding right now, for about an hour:

 

image.png.c4b5a41d0698fbe27167467cdde7b49b.png

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MS30 M.2 SATA III, CoolerMaster HAF XM Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Viotek GN24C 24" 1080p 144hz curved and Hannspree HF207 as 2nd monitor

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out (getting its facelift as of June 2020 have new air cooler, drives etc.  About 60% finished.  Will no longer be a closed loop system.  Slight update, upgraded to larger SSD, and air cooling installed Arctic Alpine cooler.

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, Corsair H100i GTX 240mm AIO w/ 12mm thick fans to fit in top exhaust, 256gb TIMETEC SSD, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman gaming mouse

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 2x4gb DDR3 1600, Team Group 120gb SSD, 500gb Seagate 7mm HDD attached storage, Windows 10 Pro, Logitech K400+, USB Wifi adapter all vesa mounted to the back of a 37" 1080p TV 

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 4gb ram tinker toy at the moment.  Running Manjaro XFCE at the moment.

Home Security: ZOSI 8 channel CCTV (4 used at this time, 1080p) DVR H.265+, 3tb HGST Enterprise HDD, ASUS monitor for display

Link to post
Share on other sites
2 minutes ago, Rogerzz said:

will the P14s be quieter than the P12s i guess? Cant find any real comparisons

Arctic measures in sone, not dBA - which is basically how pleasant a tone is.  With 14 P12's and 1F8 Arctics running, they are audible only in the sense that I can tell when the PCs are on, vs off.

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MS30 M.2 SATA III, CoolerMaster HAF XM Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Viotek GN24C 24" 1080p 144hz curved and Hannspree HF207 as 2nd monitor

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out (getting its facelift as of June 2020 have new air cooler, drives etc.  About 60% finished.  Will no longer be a closed loop system.  Slight update, upgraded to larger SSD, and air cooling installed Arctic Alpine cooler.

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, Corsair H100i GTX 240mm AIO w/ 12mm thick fans to fit in top exhaust, 256gb TIMETEC SSD, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman gaming mouse

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 2x4gb DDR3 1600, Team Group 120gb SSD, 500gb Seagate 7mm HDD attached storage, Windows 10 Pro, Logitech K400+, USB Wifi adapter all vesa mounted to the back of a 37" 1080p TV 

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 4gb ram tinker toy at the moment.  Running Manjaro XFCE at the moment.

Home Security: ZOSI 8 channel CCTV (4 used at this time, 1080p) DVR H.265+, 3tb HGST Enterprise HDD, ASUS monitor for display

Link to post
Share on other sites
1 minute ago, Tristerin said:

Depends on who you are as a person lol  

 

Heres me:

 

Two PCs sitting next to me right now 2.5 feet away max

 

6x Arctic P12 as intake (4x one PC, 2x other PC)

8x Arctic P12 as exhaust (6x one PC, 2x other PC)

1x Thermaltake 200mm as intake (side intake 1 PC)

1x Rosewill 140mm as side intake (other PC)

1x CM and 1x Cougar 120mm fans exhaust (2x other PC)

1x Arctic F8 as top intake pointing at VRMs (closest PC)

 

Lots of radiators involved

 

The sound is pleasent, not loud, and my PCs run mid/low 50c under full load.  Im folding right now, for about an hour:

 

image.png.c4b5a41d0698fbe27167467cdde7b49b.png

I don't OC or anything, is it better to get P14s as its the same price? 

Ryzen 5 3600 4.0GHz 1.1V | 16GB @ 3600MHz | GTX 1070 8GB | Corsair RMx 650W | Fractal Meshify C

Link to post
Share on other sites
Just now, Rogerzz said:

I don't OC or anything, is it better to get P14s as its the same price? 

Yes, I would get P14s over P12s for a better price, especially since (in your case) they fit.  More airflow at lower RPM (which means less sound over say a P12)

 

I just looked up their spec, they shouldnt be loud at all (.3 sone)

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MS30 M.2 SATA III, CoolerMaster HAF XM Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Viotek GN24C 24" 1080p 144hz curved and Hannspree HF207 as 2nd monitor

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out (getting its facelift as of June 2020 have new air cooler, drives etc.  About 60% finished.  Will no longer be a closed loop system.  Slight update, upgraded to larger SSD, and air cooling installed Arctic Alpine cooler.

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, Corsair H100i GTX 240mm AIO w/ 12mm thick fans to fit in top exhaust, 256gb TIMETEC SSD, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman gaming mouse

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 2x4gb DDR3 1600, Team Group 120gb SSD, 500gb Seagate 7mm HDD attached storage, Windows 10 Pro, Logitech K400+, USB Wifi adapter all vesa mounted to the back of a 37" 1080p TV 

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 4gb ram tinker toy at the moment.  Running Manjaro XFCE at the moment.

Home Security: ZOSI 8 channel CCTV (4 used at this time, 1080p) DVR H.265+, 3tb HGST Enterprise HDD, ASUS monitor for display

Link to post
Share on other sites
2 minutes ago, Tristerin said:

Yes, I would get P14s over P12s for a better price, especially since (in your case) they fit.  More airflow at lower RPM (which means less sound over say a P12)

 

I just looked up their spec, they shouldnt be loud at all (.3 sone)

Two 140mm should fit in these two slots correct?

 

kfVleoe.png

Ryzen 5 3600 4.0GHz 1.1V | 16GB @ 3600MHz | GTX 1070 8GB | Corsair RMx 650W | Fractal Meshify C

Link to post
Share on other sites
2 minutes ago, Rogerzz said:

Two 140mm should fit in these two slots correct?

 

kfVleoe.png

Nope, rear exhaust states 120mm

 

  • Total fan mounts
    7
  • Front fan
    3x 120 mm or 2x 140 mm (1x Dynamic X2 GP-12 included)
  • Top fan
    2x 120/140 mm
  • Rear fan
    1x 120 mm (1x Dynamic X2 GP-12 included)
  • Bottom fan
    1x 120 mm
  • Dust filters
    Bottom fan + PSU, Front fans, Top fans

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MS30 M.2 SATA III, CoolerMaster HAF XM Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Viotek GN24C 24" 1080p 144hz curved and Hannspree HF207 as 2nd monitor

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out (getting its facelift as of June 2020 have new air cooler, drives etc.  About 60% finished.  Will no longer be a closed loop system.  Slight update, upgraded to larger SSD, and air cooling installed Arctic Alpine cooler.

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, Corsair H100i GTX 240mm AIO w/ 12mm thick fans to fit in top exhaust, 256gb TIMETEC SSD, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman gaming mouse

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 2x4gb DDR3 1600, Team Group 120gb SSD, 500gb Seagate 7mm HDD attached storage, Windows 10 Pro, Logitech K400+, USB Wifi adapter all vesa mounted to the back of a 37" 1080p TV 

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 4gb ram tinker toy at the moment.  Running Manjaro XFCE at the moment.

Home Security: ZOSI 8 channel CCTV (4 used at this time, 1080p) DVR H.265+, 3tb HGST Enterprise HDD, ASUS monitor for display

Link to post
Share on other sites

To me, why can you fit 2x as front intake, those slider slots look to fit 2x140mm without having to go below the HDD slots

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MS30 M.2 SATA III, CoolerMaster HAF XM Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Viotek GN24C 24" 1080p 144hz curved and Hannspree HF207 as 2nd monitor

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out (getting its facelift as of June 2020 have new air cooler, drives etc.  About 60% finished.  Will no longer be a closed loop system.  Slight update, upgraded to larger SSD, and air cooling installed Arctic Alpine cooler.

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, Corsair H100i GTX 240mm AIO w/ 12mm thick fans to fit in top exhaust, 256gb TIMETEC SSD, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman gaming mouse

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 2x4gb DDR3 1600, Team Group 120gb SSD, 500gb Seagate 7mm HDD attached storage, Windows 10 Pro, Logitech K400+, USB Wifi adapter all vesa mounted to the back of a 37" 1080p TV 

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 4gb ram tinker toy at the moment.  Running Manjaro XFCE at the moment.

Home Security: ZOSI 8 channel CCTV (4 used at this time, 1080p) DVR H.265+, 3tb HGST Enterprise HDD, ASUS monitor for display

Link to post
Share on other sites
2 minutes ago, Tristerin said:

To me, why can you fit 2x as front intake, those slider slots look to fit 2x140mm without having to go below the HDD slots

sorry the arrow at the top is for front intake not rear lol

Ryzen 5 3600 4.0GHz 1.1V | 16GB @ 3600MHz | GTX 1070 8GB | Corsair RMx 650W | Fractal Meshify C

Link to post
Share on other sites
11 minutes ago, Rogerzz said:

sorry the arrow at the top is for front intake not rear lol

Yes it will fit 2x front intake 140mms based on pics, and product description

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MS30 M.2 SATA III, CoolerMaster HAF XM Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Viotek GN24C 24" 1080p 144hz curved and Hannspree HF207 as 2nd monitor

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out (getting its facelift as of June 2020 have new air cooler, drives etc.  About 60% finished.  Will no longer be a closed loop system.  Slight update, upgraded to larger SSD, and air cooling installed Arctic Alpine cooler.

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, Corsair H100i GTX 240mm AIO w/ 12mm thick fans to fit in top exhaust, 256gb TIMETEC SSD, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman gaming mouse

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 2x4gb DDR3 1600, Team Group 120gb SSD, 500gb Seagate 7mm HDD attached storage, Windows 10 Pro, Logitech K400+, USB Wifi adapter all vesa mounted to the back of a 37" 1080p TV 

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 4gb ram tinker toy at the moment.  Running Manjaro XFCE at the moment.

Home Security: ZOSI 8 channel CCTV (4 used at this time, 1080p) DVR H.265+, 3tb HGST Enterprise HDD, ASUS monitor for display

Link to post
Share on other sites
4 minutes ago, Tristerin said:

Yes it will fit 2x front intake 140mms based on pics, and product description

will i be able to control the fan speed on the 3 pin 5 pack? my mobo is b550 aorus elite

Ryzen 5 3600 4.0GHz 1.1V | 16GB @ 3600MHz | GTX 1070 8GB | Corsair RMx 650W | Fractal Meshify C

Link to post
Share on other sites

DC control via the motherboard BIOS, check to see (go into BIOS now) to see what functionality it has - my B450 and B350 boards have DC control (ASRock and ASUS) so I would assume your board has this as well.  With DC control there is a threshold unique to each fan type that it may not run at all under a certain low level of power it is given (like 50% speed and lower will result in it not turning the fan on at all, for example)

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MS30 M.2 SATA III, CoolerMaster HAF XM Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Viotek GN24C 24" 1080p 144hz curved and Hannspree HF207 as 2nd monitor

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out (getting its facelift as of June 2020 have new air cooler, drives etc.  About 60% finished.  Will no longer be a closed loop system.  Slight update, upgraded to larger SSD, and air cooling installed Arctic Alpine cooler.

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, Corsair H100i GTX 240mm AIO w/ 12mm thick fans to fit in top exhaust, 256gb TIMETEC SSD, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman gaming mouse

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 2x4gb DDR3 1600, Team Group 120gb SSD, 500gb Seagate 7mm HDD attached storage, Windows 10 Pro, Logitech K400+, USB Wifi adapter all vesa mounted to the back of a 37" 1080p TV 

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 4gb ram tinker toy at the moment.  Running Manjaro XFCE at the moment.

Home Security: ZOSI 8 channel CCTV (4 used at this time, 1080p) DVR H.265+, 3tb HGST Enterprise HDD, ASUS monitor for display

Link to post
Share on other sites

I run my Arctics all at 100% and they arent loud at all.  14 of that type right next to me right now.  Just a pleasant tone that lets me know the PCs are turned on.

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MS30 M.2 SATA III, CoolerMaster HAF XM Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Viotek GN24C 24" 1080p 144hz curved and Hannspree HF207 as 2nd monitor

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out (getting its facelift as of June 2020 have new air cooler, drives etc.  About 60% finished.  Will no longer be a closed loop system.  Slight update, upgraded to larger SSD, and air cooling installed Arctic Alpine cooler.

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, Corsair H100i GTX 240mm AIO w/ 12mm thick fans to fit in top exhaust, 256gb TIMETEC SSD, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman gaming mouse

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 2x4gb DDR3 1600, Team Group 120gb SSD, 500gb Seagate 7mm HDD attached storage, Windows 10 Pro, Logitech K400+, USB Wifi adapter all vesa mounted to the back of a 37" 1080p TV 

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 4gb ram tinker toy at the moment.  Running Manjaro XFCE at the moment.

Home Security: ZOSI 8 channel CCTV (4 used at this time, 1080p) DVR H.265+, 3tb HGST Enterprise HDD, ASUS monitor for display

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×