I'm losing my mind. Cant install windows 10 with usb.

[Broggernaut]

hello all

 

Got me a new pc today fresh from the shelf.

Ryzen 5 3600

gtx 1660s oc

2x8 patriot 3200mhz *side note: pc starts but no signal to monitor with both ram's inserted. Tried a1-a3,then a2-a4,a1-a2 and a3-a4. Wont work that way at all.No signal. Pc works fine with only 1 ram stick in a2 slot

Asrock B450 Pro4 F

Seasonic 650w

 

The problem persists for 11 hours as of this writing. I made a bootable usb flash drive with windows creation tool.

USB is 2.0 and is detected in uefi

Used every 2.0 and 3.0 port at disposal

Top boot priority

Secure boot disabled.

Tried both nfts and fat32 disk fortmat.

Did an rufus iso.

 

I dont know what to do anymore because i started losing my mind long ago. I watched every video,seen every possible instructions here and on the internet and no luck.

Whats wrong with me? Uploaded image so it may help.

 

For the love of god please help.

 

 

[emosun]

install windows 10 with a different machine then put the drive into the pc if it's giving you trouble

[EridanusSV]

USB 2 or 3

8GB FAT32

 

you don't even need RUFUS or anything or do any special partitioning. Media Creation will erase eveyrhting completely before it writes anything in.

[Broggernaut]

Just now, EridanusSV said:

USB 2 or 3

8GB FAT32

 

you don't even need RUFUS or anything or do any special partitioning. Media Creation will erase eveyrhting completely before it writes anything in.

yeah i know,i used rufus only after first failed  attempt at "usb flash drive" so i decided to try with iso

 I did as every other person before me but for some reason it wont let me past that window.

[EridanusSV]

I assume you've tried the diskpart cleaning process and still nothing.

 

Ask your neighbor for a USB they're not using or just get one for $4.00

 

And once you get one, mark it as your Win installer, don't use it for anything else. And if you plan on using media creation tool again, just format it in the simplest way.

[Deli]

4 minutes ago, Broggernaut said:

yeah i know,i used rufus only after first failed  attempt at "usb flash drive" so i decided to try with iso

 I did as every other person before me but for some reason it wont let me past that window.

If the USB drive isn't done properly, you will see this window pop up.

1. Use Windows Media Creation tool.

2. Try another USB drive

3 Try another USB port. USB 2 port usually works better than USB 3 if the motherboard is the newest.

[Broggernaut]

2 minutes ago, EridanusSV said:

I assume you've tried the diskpart cleaning process and still nothing.

 

Ask your neighbor for a USB they're not using or just get one for $4.00

 

And once you get one, mark it as your Win installer, don't use it for anything else. And if you plan on using media creation tool again, just format it in the simplest way.

yeah i did diskpart part.

 

I guess i will have to look for another usb.

 

Thank you.