Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

Why my pc acting like this? No one could help me with this so if you can please do

Depressedpcbuilder
 Share Followers 1
Posted

 

Hello! So I wanted to sell my old gpu gtx 660 and when i brought it to this guy it didnt work it booted up and then shut down he tested it on 2 different motherboards same problem so i was like thats odd and didn't think any of it later but then like 1 week after I put my gtx 660 in my motherboard which is ddr3 HB1M-C and it booted up just fine but it didnt display on monitor i was like ok meh its broken whatever so i went to sleep next day i did cable management because i have shitty office mini atx case and plugged my gtx 1050ti back in and when i was about to start it same problem as before, cpu fan and gpu fans spinning but it still isn't showing on monitor then I thought it was my monitors fault so I grabbed my monitor and plugged hdmi cable to tv router and some kind of tv show showed up just fine so then i thought it was my gpu's fault but i was so confused it was working day before just fine. So only solution left i unplugged gpu from motherboard then plugged my vga into motherboard because this motherboard doesn't have hdmi support and tried to boot it up
Nope 
Still the same problem 
So please help me is the problem my motherboard? And if so why did this just happen

Link to post
Share on other sites
Posted

From what i can decipher: H81M-C from Asus? Since HB1-MC does not seem to exist? 

You will need to connect a DVI or VGA to the motherboard to see if its switched to the IGPU. There will be a setting in the BIOS for that.

If you cannot do that i suggest you reset the bios to default (Either by removing the battery and unplugging the PC, or shorting the reset bios pins)

 

It should the detect your 1050

Link to post
Share on other sites
Posted
  • Author
10 minutes ago, Dujith said:

From what i can decipher: H81M-C from Asus? Since HB1-MC does not seem to exist? 

You will need to connect a DVI or VGA to the motherboard to see if its switched to the IGPU. There will be a setting in the BIOS for that.

If you cannot do that i suggest you reset the bios to default (Either by removing the battery and unplugging the PC, or shorting the reset bios pins)

 

It should the detect your 1050

Yes sorry its H81M-C I have tried plugging VGA into motherboard before but it still didnt work but here is the thing detection isn't the problem the problem is when i pres power button everything spins in motherboard its working just fine but like its not showing on my monitor thats the problem

Link to post
Share on other sites
Posted

Everything spinning does not mean its okay. That just means your PSU works and it passes the most basic startup checks.

You should check your RAM and CPU if its seated correctly. Might have shifted when u switched GPU's.

But first, reset the BIOS. Thats always the first step with no image on screen imo.

Link to post
Share on other sites
Posted
  • Author
16 minutes ago, Dujith said:

From what i can decipher: H81M-C from Asus? Since HB1-MC does not seem to exist? 

You will need to connect a DVI or VGA to the motherboard to see if its switched to the IGPU. There will be a setting in the BIOS for that.

If you cannot do that i suggest you reset the bios to default (Either by removing the battery and unplugging the PC, or shorting the reset bios pins)

 

It should the detect your 1050

And i tried ur method too by removing the battery but still nothing sadly

Link to post
Share on other sites
Posted
  • Author
2 minutes ago, Dujith said:

Everything spinning does not mean its okay. That just means your PSU works and it passes the most basic startup checks.

You should check your RAM and CPU if its seated correctly. Might have shifted when u switched GPU's.

But first, reset the BIOS. Thats always the first step with no image on screen imo.

 

image.jpg

Link to post
Share on other sites
Posted

This clip tells me your RAM is NOT seated properly.

 

48 minutes ago, Dujith said:

 

You should check your RAM.  Might have shifted when u switched GPU's.

 

Nailed it

not seated.PNG

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MS30 M.2 SATA III, CoolerMaster HAF XM Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Viotek GN24C 24" 1080p 144hz curved and Hannspree HF207 as 2nd monitor

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out (getting its facelift as of June 2020 have new air cooler, drives etc.  About 60% finished.  Will no longer be a closed loop system.  Slight update, upgraded to larger SSD, and air cooling installed Arctic Alpine cooler.

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, Corsair H100i GTX 240mm AIO w/ 12mm thick fans to fit in top exhaust, 256gb TIMETEC SSD, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman gaming mouse

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 2x4gb DDR3 1600, Team Group 120gb SSD, 500gb Seagate 7mm HDD attached storage, Windows 10 Pro, Logitech K400+, USB Wifi adapter all vesa mounted to the back of a 37" 1080p TV 

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 4gb ram tinker toy at the moment.  Running Manjaro XFCE at the moment.

Home Security: ZOSI 8 channel CCTV (4 used at this time, 1080p) DVR H.265+, 3tb HGST Enterprise HDD, ASUS monitor for display

Link to post
Share on other sites
Posted
57 minutes ago, Depressedpcbuilder said:

I have tried plugging VGA into motherboard

on board GPU is disabled by default when dGPU is plugged in, so dont have to try using it, it wont work

Things I need help with:

Spoiler

none atm

 

I hate Intel's pricing, Ryzen's weird quirks, Nvidia's pricing, and Radeon GPUs in general

 

Spoiler

 

Products I like:

Spoiler

Sony Xperia Z1 / Z2 / 10 ii, Asus Strix 970 / 1070, Samsung SSD, WD HDD, Corsair PSUs (AX, RM, CX(grey)), GeForce GPU, NZXT N450/S340, be quiet! Coolers, G.Skill Trident RAM, Logitech M525, Logitech G440, Razer Deathadder Elite

 

Products I hate:

Spoiler

Xperia Z3, XiaoMi 5c, Radeon GPUs, Razer Audio Products, any bloatwares

 

Companies I absolutely adore: (and hope it stays that way)

Spoiler

be quiet! - sent me AM4 mounting for my DRP3 even though it's way past the timeframe stated, no questions asked

Corsair - very good RMA experience, absolutely recommend

 

Companies I hate:

Spoiler

Nvidia, Intel, Apple, TMT (Thundermatch, a retailer)

 

Personal Blacklisted Companies:

Spoiler

Acer: shit tier quality products, shit tier customer service thus far, they "tried" to solve my issue but they arent really doing anything but delaying and delaying. (on-going case since July)

Gigabyte: horrible customer service (gigabyte had literally 0 customer service, asked me to go to retailer with NO WAY to email them about a question) but at least they fixed my shit in ONE MONTH (would probably take me 1 hour to fix if they let me email them)

XiaoMi Phones: built like a tank but the software is buggy as all hell

Seagate HDD: had too many dead seagate drives

Kingston SSD: 300V controller swap thingy

Razer (except their mouse)

 

Remember, just because I had good/bad experiences with these companies/product, doesn't mean you will have similar experiences too. I would still recommend these products if they made sense for your needs, but I'll add a disclaimer of my experience if it's relevant. Feel free to DM me asking why they are where they are.

 

 

Link to post
Share on other sites
Posted
  • Author
4 minutes ago, Tristerin said:

This clip tells me your RAM is NOT seated properly.

 

Nailed it

not seated.PNG

No fucking way IT FUCKING WORKED OMG UR THE OG BRUH I HAVE TRIED EVERYTHING BEEN WORKING ON IT FOR 9 hours responding to reddit and shit NO WAYYY I AM SO HAPPY i didnt hace any money for new motherboard and when this worked i fucking screamed with joy then cried of how retarded i was

Link to post
Share on other sites
Posted
  • Author
1 minute ago, Moonzy said:

on board GPU is disabled by default when dGPU is plugged in, so dont have to try using it, it wont work

Ty very much but i am actually dumb i had ram out of motherboard LMAO

Link to post
Share on other sites
Posted
12 minutes ago, Depressedpcbuilder said:

Ty very much but i am actually dumb i had ram out of motherboard LMAO

ayy ayy ggs

  • CPU
    AMD Ryzen 5 3600
  • Motheboard
    MSI - MPG X570 GAMING EDGE WIFI (Socket AM4) USB-C Gen2 AMD Motherboard
  • RAM
    CORSAIR - Vengeance RGB PRO 32GB (2PK 16GB) 3.2GHz PC4-25600 DDR4 DIMM Unbuffered Non-ECC Desktop Memory Kit with RGB Lighting - Black
  • GPU
    MSI - NVIDIA GeForce RTX 2060 SUPER 8GB GDDR6 PCI Express 3.0 Graphics Card - Black/Gray
  • Case
    CORSAIR - iCUE 220T RGB Airflow ATX Mid-Tower Smart Case - Black
  • Storage
    WD - Blue 500GB Internal SATA Solid State Drive Seagate - Barracuda 2TB Internal SATA Hard Drive for Desktops
  • PSU
    CORSAIR - RMx Series 850W ATX12V 2.4/EPS12V 2.92 80 Plus Gold Modular Power Supply - Black
  • Display
    Samsung - Odyssey CRG5 series 24” LED Curved FHD FreeSync monitor - Black
  • Keyboard
    Razer Cynosa Chroma
  • Mouse
    Razer Mamba Elite
  • OS
    Windows 10 Home
Link to post
Share on other sites
Posted
1 hour ago, Depressedpcbuilder said:

No fucking way IT FUCKING WORKED OMG UR THE OG BRUH I HAVE TRIED EVERYTHING BEEN WORKING ON IT FOR 9 hours responding to reddit and shit NO WAYYY I AM SO HAPPY i didnt hace any money for new motherboard and when this worked i fucking screamed with joy then cried of how retarded i was

Even experienced people do this.  My favorite one over the last 12 months was when I put a PC together, I forgot to plug the PSU into the wall outlet.  Spent 30 minutes fuming and checking connections.  Walked away for a bit, came back and entered the room and saw the problem right away.

 

Glad its fixed for you!

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MS30 M.2 SATA III, CoolerMaster HAF XM Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Viotek GN24C 24" 1080p 144hz curved and Hannspree HF207 as 2nd monitor

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out (getting its facelift as of June 2020 have new air cooler, drives etc.  About 60% finished.  Will no longer be a closed loop system.  Slight update, upgraded to larger SSD, and air cooling installed Arctic Alpine cooler.

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, Corsair H100i GTX 240mm AIO w/ 12mm thick fans to fit in top exhaust, 256gb TIMETEC SSD, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman gaming mouse

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 2x4gb DDR3 1600, Team Group 120gb SSD, 500gb Seagate 7mm HDD attached storage, Windows 10 Pro, Logitech K400+, USB Wifi adapter all vesa mounted to the back of a 37" 1080p TV 

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 4gb ram tinker toy at the moment.  Running Manjaro XFCE at the moment.

Home Security: ZOSI 8 channel CCTV (4 used at this time, 1080p) DVR H.265+, 3tb HGST Enterprise HDD, ASUS monitor for display

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Followers 1
Go to topic listing Troubleshooting
Newegg

×