Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

The beauty of BSOD !!!!

Go to solution Solved by aisle9,

Take it down to one stick of RAM, and put that in the farthest slot from the CPU socket. Do whatever you're doing to test that's getting you these errors. Note your results and move on until all DIMMs are tested in all slots. Once you've gone through each DIMM individually, start running all of them at the same time. Make sure your RAM is configured in a way shown in the motherboard manual (i.e., not side by side on a four-slot board).

 

If one DIMM makes it through all of the slots fine but the other doesn't (assuming you have two DIMMs), you have a bad DIMM. If both DIMMs are failing on the same slot, you have a bad slot, and that usually means that you have a bad motherboard). If both DIMMs make it through without crashing, something else is up, probably your board itself. If both DIMMs crash on everything, motherboard issues.

I’m still having these errors and don’t have another PC to test each parts is working or not.

 

As far as I can confirm,

 

CPU is working fine. Ran a bunch of benchmarks with zero shutdowns. Non-Overclocked.

PSU is brand new and is working fine.

AIO, SSD is okay too.

 

I don’t know if my GPU is working fine or not.

 

Currently running Windows Memory Diagnostic Tool and it says an error is found on this hardware. Throw the RAMs out of the windows?

 

Ah ... the beauty of windows. :D

48782202-8229-49F0-BE90-ECA7C4A56F54.jpeg

7BB86168-C93B-488C-910C-74F53CD11CC3.jpeg

3F3FF56A-31DA-48DD-AB0F-FCCF61996FD0.jpeg

Link to post
Share on other sites

RMA the RAM

My PCs: Desky | Beddie | Miney | Benchie

Things I need help with: (nothing at the moment)

Spoiler

none atm

I hate Intel's pricing, Ryzen's weird quirks, Nvidia's pricing, and Radeon GPUs in general

Spoiler

Products I like:

Spoiler

Sony Xperia Z1 / Z2 / 10 ii, Asus Strix 970 / 1070, Samsung SSD, WD HDD, Corsair PSUs (AX, RM, CX(grey)), GeForce GPU, NZXT N450/S340, be quiet! Coolers, G.Skill Trident RAM, Logitech M525, Logitech G440, Razer Deathadder Elite

Products I hate:

Spoiler

Xperia Z3, XiaoMi 5c, Radeon GPUs, Razer Audio Products, any bloatwares

Companies I absolutely adore: (and hope it stays that way)

Spoiler

be quiet! - sent me AM4 mounting for my DRP3 even though it's way past the timeframe stated, no questions asked

Corsair - very good RMA experience, absolutely recommend

Companies I hate:

Spoiler

Nvidia, Intel, Apple, TMT (Thundermatch, a retailer)

Personal Blacklisted Companies:

Spoiler

Acer: shit tier quality products, shit tier customer service thus far, they "tried" to solve my issue but they arent really doing anything but delaying and delaying. (on-going case since July)

Gigabyte: horrible customer service (gigabyte had literally 0 customer service, asked me to go to retailer with NO WAY to email them about a question) but at least they fixed my shit in ONE MONTH (would probably take me 1 hour to fix if they let me email them)

XiaoMi Phones: built like a tank but the software is buggy as all hell

Seagate HDD: had too many dead seagate drives

Kingston SSD: 300V controller swap thingy

Razer (except their mouse)

Remember, just because I had good/bad experiences with these companies/product, doesn't mean you will have similar experiences too. I would still recommend these products if they made sense for your needs, but I'll add a disclaimer of my experience if it's relevant. Feel free to DM me asking why they are where they are.

 

Link to post
Share on other sites

Take it down to one stick of RAM, and put that in the farthest slot from the CPU socket. Do whatever you're doing to test that's getting you these errors. Note your results and move on until all DIMMs are tested in all slots. Once you've gone through each DIMM individually, start running all of them at the same time. Make sure your RAM is configured in a way shown in the motherboard manual (i.e., not side by side on a four-slot board).

 

If one DIMM makes it through all of the slots fine but the other doesn't (assuming you have two DIMMs), you have a bad DIMM. If both DIMMs are failing on the same slot, you have a bad slot, and that usually means that you have a bad motherboard). If both DIMMs make it through without crashing, something else is up, probably your board itself. If both DIMMs crash on everything, motherboard issues.

Sincerely,

 

me

Link to post
Share on other sites
6 hours ago, aisle9 said:

Take it down to one stick of RAM, and put that in the farthest slot from the CPU socket. Do whatever you're doing to test that's getting you these errors. Note your results and move on until all DIMMs are tested in all slots. Once you've gone through each DIMM individually, start running all of them at the same time. Make sure your RAM is configured in a way shown in the motherboard manual (i.e., not side by side on a four-slot board).

 

If one DIMM makes it through all of the slots fine but the other doesn't (assuming you have two DIMMs), you have a bad DIMM. If both DIMMs are failing on the same slot, you have a bad slot, and that usually means that you have a bad motherboard). If both DIMMs make it through without crashing, something else is up, probably your board itself. If both DIMMs crash on everything, motherboard issues.

Thanks. It seems to need a lot of work to do. I have never doubted MB to gone bad. I’ll test as above and see what’s failing me.

Link to post
Share on other sites
2 hours ago, ZWELINHTET said:

Thanks. It seems to need a lot of work to do. I have never doubted MB to gone bad. I’ll test as above and see what’s failing me.

It’s a pain, but it’s the only way to thoroughly test it.

Sincerely,

 

me

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×