Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

So i just finished building my new pc and it boots fine and all but i dont have internet connection

Its 10600k in a vision g motherboard

Can it be because of the bios time?

Its off by 5 houra

Is i set it to normal will it fix the no connection problem?

The cable is fine i just used it 5 hours ago with my old pc and nobody touched it

"I fear not the man who has practiced 10,000 kicks once, but I fear the man who has practiced one kick 10,000 times." - Bruce Lee

 

Link to post
Share on other sites

Set the time correctly because it being wrong will cause other problems.

 

Go to your motherboard's support page and download all chipset and network drivers and install them.

BabyBlu (Primary Rig): 

  • CPU: Intel Core i9 9900K @ Per Core 5.2Ghz, 5.2Ghz, 5.2Ghz, 5.2Ghz, 5.1Ghz, 5.1Ghz, 5.0Ghz, 5.0Ghz; Cache @ 4.8Ghz; 0 AVX offset
  • Motherboard: Asus Maximus XI Hero
  • RAM: G.Skill Trident Z RGB 4x8GB DDR4-3200 CL14 @ 4000Mhz 16-18-18-36
  • GPU: MSI RTX 2080 Sea Hawk EK X
  • Case: Phanteks Evolv X
  • Storage: XPG SX8200 Pro 2TB NVME, 3x ADATA Ultimate SU800 1TB (RAID 0), Samsung 970 EVO Plus 500GB NVME
  • PSU: Corsair HX1000i
  • Monitor: Dell S2417DG 23.8" 2560x1440 165 Hz Gsync
  • Cooling: Custom water loop (CPU & GPU), Radiators: 1x140mm(Back), 1x280mm(Top), 1x420mm(Front)
  • Keyboard: Corsair Strafe RGB (Cherry MX Brown)
  • Mouse: Corsair Scimitar Elite/MasterMouse MM710
  • Headset: Corsair Void Pro RGB
  • OS: Windows 10 Pro

Roxanne (Wife Build):

  • CPU: Intel Core i7 4790K @ Per Core 5.0Ghz - 5.0Ghz - 4.9Ghz - 4.8Ghz, Cache @ 4.6Ghz, De-lidded
  • Motherboard: Asus Z97A
  • RAM: G.Skill Ripjaws X 4x4GB DDR3-2133 CL9 @ 2200Mhz 9-11-10-22
  • GPU: EVGA GTX 1080 FTW2 Gaming ICX
  • Case: Corsair Vengeance C70, With Custom Side-Panel Window
  • Storage: Samsung 850 EVO 250GB, Samsung 860 EVO 1TB, Silicon Power A80 1TB NVME
  • PSU: Corsair AX760
  • Monitor: Samsung C27JG56 27" 2560x1440 144Hz Curved Freesync
  • Cooling: Corsair H115i RGB
  • Keyboard: Rosewill RK 9000V2(Cherry MX Blue)
  • Mouse: Glorious Model O-
  • Headset: SteelSeries Arctis 7
  • OS: Windows 10 Pro

BlackBox (HTPC):

  • Intel Pentium G4600 (Kaby Lake)
  • Asus H110T/CSM Thin Mini-ITX
  • G.Skill 1x8GB DDR4-2400 SO-DIMM CL16
  • iGPU
  • Akasa Euler Fanless Solid Aluminum THIN Mini ITX Case (passively cooled)
  • Samsung 850 EVO 250GB
  • External 120W Power Adaptor
  • 4K TV
  • Passively cooled by the Akasa case. No moving parts!
  • Handheld QWERTY keyboard and trackpad.
  • Windows 10 Pro, Kodi autostarts on boot

NAS:

  • Synology DS216J
  • 2x8TB WD Red NAS HDDs in RAID 1. 8TB usable space
Link to post
Share on other sites

What OS did you install? The Vision D has Intel NIC/WiFi, Windows 10 should have the drivers for that.

Are the Network Adapters in the Device Manager shown correctly/working?

 

Time settings are irrelevant (they will correct themselves when you got internet).

 

Link to post
Share on other sites
4 minutes ago, HardStroke said:

So i just finished building my new pc and it boots fine and all but i dont have internet connection

Its 10600k in a vision g motherboard

Can it be because of the bios time?

Its off by 5 houra

Is i set it to normal will it fix the no connection problem?

The cable is fine i just used it 5 hours ago with my old pc and nobody touched it

You may need to set a static IP address on your new PC depending  on how your network is set up. It doesnt have anything to do with the BIOS time. 

Link to post
Share on other sites
5 minutes ago, HairlessMonkeyBoy said:

Set the time correctly because it being wrong will cause other problems.

 

Go to your motherboard's support page and download all chipset and network drivers and install them.

 

4 minutes ago, Korben said:

What OS did you install? The Vision D has Intel NIC/WiFi, Windows 10 should have the drivers for that.

Are the Network Adapters in the Device Manager shown correctly/working?

 

Time settings are irrelevant (they will correct themselves when you got internet).

 

 

4 minutes ago, JoeAceJR said:

You may need to set a static IP address on your new PC depending  on how your network is set up. It doesnt have anything to do with the BIOS time. 

Should i use the cd that came woth the mb?

I was hoping the internet would work so i could just go to gigabayes site and install everything cause the cd might be out dated...

I have a yellow triangle near the ethernet controller

"I fear not the man who has practiced 10,000 kicks once, but I fear the man who has practiced one kick 10,000 times." - Bruce Lee

 

Link to post
Share on other sites
1 minute ago, HardStroke said:

 

 

Should i use the cd that came woth the mb?

I was hoping the internet would work so i could just go to gigabayes site and install everything cause the cd might be out dated...

I have a yellow triangle near the ethernet controller

The board is quiet new, so the drivers on the CD should work fine. If you have a optical drive, yes, install them.

Link to post
Share on other sites
3 minutes ago, HardStroke said:

Should i use the cd that came woth the mb?

Install the drivers on the CD so that you can go to the support page and replace them with the latest versions.

BabyBlu (Primary Rig): 

  • CPU: Intel Core i9 9900K @ Per Core 5.2Ghz, 5.2Ghz, 5.2Ghz, 5.2Ghz, 5.1Ghz, 5.1Ghz, 5.0Ghz, 5.0Ghz; Cache @ 4.8Ghz; 0 AVX offset
  • Motherboard: Asus Maximus XI Hero
  • RAM: G.Skill Trident Z RGB 4x8GB DDR4-3200 CL14 @ 4000Mhz 16-18-18-36
  • GPU: MSI RTX 2080 Sea Hawk EK X
  • Case: Phanteks Evolv X
  • Storage: XPG SX8200 Pro 2TB NVME, 3x ADATA Ultimate SU800 1TB (RAID 0), Samsung 970 EVO Plus 500GB NVME
  • PSU: Corsair HX1000i
  • Monitor: Dell S2417DG 23.8" 2560x1440 165 Hz Gsync
  • Cooling: Custom water loop (CPU & GPU), Radiators: 1x140mm(Back), 1x280mm(Top), 1x420mm(Front)
  • Keyboard: Corsair Strafe RGB (Cherry MX Brown)
  • Mouse: Corsair Scimitar Elite/MasterMouse MM710
  • Headset: Corsair Void Pro RGB
  • OS: Windows 10 Pro

Roxanne (Wife Build):

  • CPU: Intel Core i7 4790K @ Per Core 5.0Ghz - 5.0Ghz - 4.9Ghz - 4.8Ghz, Cache @ 4.6Ghz, De-lidded
  • Motherboard: Asus Z97A
  • RAM: G.Skill Ripjaws X 4x4GB DDR3-2133 CL9 @ 2200Mhz 9-11-10-22
  • GPU: EVGA GTX 1080 FTW2 Gaming ICX
  • Case: Corsair Vengeance C70, With Custom Side-Panel Window
  • Storage: Samsung 850 EVO 250GB, Samsung 860 EVO 1TB, Silicon Power A80 1TB NVME
  • PSU: Corsair AX760
  • Monitor: Samsung C27JG56 27" 2560x1440 144Hz Curved Freesync
  • Cooling: Corsair H115i RGB
  • Keyboard: Rosewill RK 9000V2(Cherry MX Blue)
  • Mouse: Glorious Model O-
  • Headset: SteelSeries Arctis 7
  • OS: Windows 10 Pro

BlackBox (HTPC):

  • Intel Pentium G4600 (Kaby Lake)
  • Asus H110T/CSM Thin Mini-ITX
  • G.Skill 1x8GB DDR4-2400 SO-DIMM CL16
  • iGPU
  • Akasa Euler Fanless Solid Aluminum THIN Mini ITX Case (passively cooled)
  • Samsung 850 EVO 250GB
  • External 120W Power Adaptor
  • 4K TV
  • Passively cooled by the Akasa case. No moving parts!
  • Handheld QWERTY keyboard and trackpad.
  • Windows 10 Pro, Kodi autostarts on boot

NAS:

  • Synology DS216J
  • 2x8TB WD Red NAS HDDs in RAID 1. 8TB usable space
Link to post
Share on other sites
3 minutes ago, Korben said:

The board is quiet new, so the drivers on the CD should work fine. If you have a optical drive, yes, install them.

Yeah i do

So i just toss it in while the pc is running?

Haha i never had to do that so im new to this thing :)

"I fear not the man who has practiced 10,000 kicks once, but I fear the man who has practiced one kick 10,000 times." - Bruce Lee

 

Link to post
Share on other sites
2 minutes ago, HardStroke said:

Yeah i do

So i just toss it in while the pc is running?

Haha i never had to do that so im new to this thing :)

Yes. I didn't have to do that for years, I guess... If you're lucky it automatically starts a program to guide you through the process...

Link to post
Share on other sites
29 minutes ago, Korben said:

The board is quiet new, so the drivers on the CD should work fine. If you have a optical drive, yes, install them.

What can i do if the optical drive is dead???

"I fear not the man who has practiced 10,000 kicks once, but I fear the man who has practiced one kick 10,000 times." - Bruce Lee

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×