Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

I just downloaded HWMonitor and what checking how my system is running and noticed TMPIN3 is running really hot. I currently have a Ryzen 2700x clocked at 4ghz, and my pc is an itx build inside an NZXT H1 case. Im sure overclocking is a factor to hotter vrms but im very new to overclocking so I dont fully understand these temperatures. 

 

Any info or tips would be so helpful, thank youu

vrm temps.png

Link to post
Share on other sites
8 minutes ago, younghermitcrab_ said:

I just downloaded HWMonitor and what checking how my system is running and noticed TMPIN3 is running really hot. I currently have a Ryzen 2700x clocked at 4ghz, and my pc is an itx build inside an NZXT H1 case. Im sure overclocking is a factor to hotter vrms but im very new to overclocking so I dont fully understand these temperatures. 

 

Any info or tips would be so helpful, thank youu

vrm temps.png

 

Are you sure TMPIN3 is the reading for the VRMs?

It looks like a reading from a non-existing temperature sensor instead.

If something is running at 118*C constantly, it will either be melting, burning, or caught on fire...

Intel Z390 Rig ( *NEW* Primary )

Intel X99 Rig (Officially Decommissioned, Dead CPU returned to Intel)

  • i7-8086K @ 5.1 GHz (still tweaking) -- i7-6800K
  • Gigabyte Z390 Aorus Master -- ASUS X99 Deluxe
  • Sapphire NITRO+ RX 5700 XT Special Edition -- 2x Sapphire NITRO R9-Fury in Crossfire
  • 32GB G.Skill TridentZ DDR4-3000 CL14 (16GB TridentZ RGB + 16GB Red/Black TridentZ)
  • SanDisk 480 GB SSD + 1TB Samsung 860 EVO + 1TB Intel 660p NVMe
  • EVGA SuperNOVA 850W P2 + Red/White CableMod Cables
  • Phanteks Enthoo Luxe Tempered Glass Edition
  • Ekwb Custom loop
  • Logitech G502 Proteus Spectrum + Corsair K70 (Red LED, anodized black, Cheery MX Browns)

Intel Z97 Rig (Secondary)

  • Intel i5-4690K 4.8 GHz
  • ASUS ROG Maximus VII Hero Z97
  • Sapphire Vapor-X HD 7950 EVGA GTX 1070 SC Black Edition ACX 3.0
  • 20 GB (8GB X 2 + 4GB X 1) Corsair Vengeance DDR3 1600 MHz
  • Corsair A50 air cooler  NZXT X61
  • Crucial MX500 1TB SSD + SanDisk Ultra II 240GB SSD + WD Caviar Black 1TB HDD + Kingston V300 120GB SSD [non-gimped version]
  • Antec New TruePower 550W EVGA G2 650W + White CableMod cables
  • Cooler Master HAF 912 White NZXT S340 Elite w/ white LED stips

AMD 990FX Rig (Decommissioned)

  • FX-8350 @ 4.8 / 4.9 GHz (given up on the 5.0 / 5.1 GHz attempt)
  • ASUS ROG Crosshair V Formula 990FX
  • 12 GB (4 GB X 3) G.Skill RipJawsX DDR3 @ 1866 MHz
  • Sapphire Vapor-X HD 7970 + Sapphire Dual-X HD 7970 in Crossfire  Sapphire NITRO R9-Fury in Crossfire *NONE*
  • Thermaltake Frio w/ Cooler Master JetFlo's in push-pull
  • Samsung 850 EVO 500GB SSD + Kingston V300 120GB SSD + WD Caviar Black 1TB HDD
  • Corsair TX850 (ver.1)
  • Cooler Master HAF 932

 

<> Electrical Engineer , B.Eng <>

<> Electronics & Computer Engineering Technologist (Diploma + Advanced Diploma) <>

<> Electronics Engineering Technician for the Canadian Department of National Defence <>

Link to post
Share on other sites
29 minutes ago, -rascal- said:

 

Are you sure TMPIN3 is the reading for the VRMs?

It looks like a reading from a non-existing temperature sensor instead.

If something is running at 118*C constantly, it will either be melting, burning, or caught on fire...

How can i check what exactly TMPIN3 is? I think your correct its not connected to anything, the temp hasn't changed at all since I first noticed it

Link to post
Share on other sites

if it doesnt move from 118 it's an error.

9900k 1.36v 5.1avx 4.9ring 85C 185w (daily) 1.02v 4.3ghz 80w 50C R20 temps score=5450 ll D15 ll Z390 taichi ult 1.60 bios ll gskill 4x8gb 14-14-14-32-280-24 ddr3733  bdie 1.49v 45C 1.22sa/1.18 io  ll EVGA 2080 ti XC 1995//7600 325w 69C stock voltage (bad ocer) ll  8x nf12/14 fans 2x samsung 860 evo 500gb raid 0 ll 500gb nvme 970 evo ll Corsair graphite 780T ll EVGA G2 1300w ll Windows 10 Pro ll NEC PA272w (movie, work mon) 1080p 60hzll Predator X27 4k144 hdr (using at 4:4:4 98 fan is dying)

 

old rig 8600k d15 evga 1080 ti hybrid  z370 extreme 4 2x8gb ddr3866 cl16 512gb nvme evo+ 860 evo 500gb raid 0 evga p2 1000w 

Link to post
Share on other sites
4 hours ago, younghermitcrab_ said:

the temp hasn't changed at all since I first noticed it

Probably a wrong reading 

Update the bios. 

That'll probably fix it ( assuming the sensor isn't broken)

Wārudobītā

CPU: Ryzen 3 3100. Board: B550m TUF plus. Memory: 16 (2x8) 3200 cl16 Hyper x Fury RGB. GPU: Gigabyte Windforce 1650 super.  Boot Drive: MX500. Case: Antec NX500 (Quite crappy. :p) PSU: CX450. 

 

Hehe, Meshify c is a kewl case. 

 

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×