Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

Troubleshooting 4 dimm run on 2400 or no post issue

Spec:

2700x

MSI X470 gaming pro carbon 

4x 3200mhz Kingston predator rgb. 

 

Situation:

Recently added two more sticks of ram into system. Previous two sticks was running with xmp profile 2 3200mhz. 

But with 4 sticks, system won't post with any oc. Only manage run it default speed 2400mhz. (yet testing 2667mhz)

 

 

Link to post
Share on other sites

4 sticks is alot of pressure on the imc for zen + 

A couple of things 

Update the bios 

Now set the soc to 1.1 

Dram to 1.35 (1.4 if needed) 

Set the frequency to 2933 with docp / xmp enabled

If it boots use memtest86 and OCCT to verify that it's stable 

Anything over 2933 is technically an overclock to the imc for zen + so it's not guaranteed especially with 4 sticks 

Good luck 

Edited by TofuHaroto

Wārudobītā

CPU: Ryzen 3 3100. Board: B550m TUF plus. Memory: 16 (2x8) 3200 cl16 Hyper x Fury RGB. GPU: Gigabyte Windforce 1650 super.  Boot Drive: MX500. Case: Antec NX500 (Quite crappy. :p) PSU: CX450. 

 

Hehe, Meshify c is a kewl case. 

 

 

Link to post
Share on other sites
1 hour ago, TofuHaroto said:

4 sticks is alot of pressure on the imc for zen + 

A couple of things 

Update the bios 

Now set the soc to 1.1 

Dram to 1.35 (1.4 if needed) 

Set the frequency to 2933 with docp / xmp enabled

If it boots use memtest86 and OCCT to verify that it's stable 

Anything over 2933 is technically an overclock to the imc for zen + so it's not guaranteed especially with 4 sticks 

Good luck 

BIOS updated to second latest 2019 dec. as the latest  was beta.

 

I not the OC guy, just simply switch the xmp on....

DRAM 1.35 is talking 1.35v? 

what is soc...

 

 

I have test the XMP1(2933)/XMP2(3200)both unable to POST.

maybe is was the cpu hard limit?

Link to post
Share on other sites
Just now, josh5671 said:

DRAM 1.35 is talking 1.35v?

Yes

 

Just now, josh5671 said:

what is soc...

Soc ≈ memory controller 

It means more things but that's part of it 

Wārudobītā

CPU: Ryzen 3 3100. Board: B550m TUF plus. Memory: 16 (2x8) 3200 cl16 Hyper x Fury RGB. GPU: Gigabyte Windforce 1650 super.  Boot Drive: MX500. Case: Antec NX500 (Quite crappy. :p) PSU: CX450. 

 

Hehe, Meshify c is a kewl case. 

 

 

Link to post
Share on other sites
43 minutes ago, josh5671 said:

BIOS updated to second latest 2019 dec. as the latest  was beta.

 

I not the OC guy, just simply switch the xmp on....

DRAM 1.35 is talking 1.35v? 

what is soc...

 

 

I have test the XMP1(2933)/XMP2(3200)both unable to POST.

maybe is was the cpu hard limit?

override SoC voltage to 1.1v - 1.15v and DRAM 1.35v should be enough for 3200 MHz or lower

maybe tune down the sub-timing, your XMP profile could be too tight.. try 16-18-18-18-36 or higher

Link to post
Share on other sites
On 6/22/2020 at 7:08 PM, TofuHaroto said:

Yes

 

Soc ≈ memory controller 

It means more things but that's part of it 

 

On 6/22/2020 at 7:53 PM, Yukha said:

override SoC voltage to 1.1v - 1.15v and DRAM 1.35v should be enough for 3200 MHz or lower

maybe tune down the sub-timing, your XMP profile could be too tight.. try 16-18-18-18-36 or higher

thank's for the help. 

I think I manage to run the system with nb 1.1v, ram 1.35v.3200mhz on 18-20-20-36 or something similar timing. 

 

Seen like the nb voltage was too low for 4 dimm. Only 0.7v as I seen that day. 

 

 

Yet stress test on ram. Using few days no issue but will do it later while free. 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×