Jump to content

Cleaning Glue Out Of Mechanical Keyboard Switches

AdvocateOfNyx

Someone I know got their first mechanical keyboard a couple years ago.  It was a Redragon K552 TKL, the one with blue switches, it's pretty common.  I didn't ask for all the details but essentially his son ended up trying to glue down his keycaps to his key switches...  Most of the switches are still okay, but a solid 15-20 of of them no longer function correctly because of glue.  He was going to throw it away but I offered to take it since I figured at the very least I could harvest some keycaps off of it.  However, I don't currently own a keyboard with blue switches or a TKL keyboard since I love my number pads.  My desk feels a little cramped sometimes and I'd love to have a TKL option to whip out, so I decided I wanted to fix it.  Sadly, this keyboard like many others doesn't have user swappable switches, so it seems as though my only option is to clean them.

 

I saw the LTT video saying that you could put your keyboard in a dishwasher if you took the keycaps off and I would be willing to try that as a last resort, however I'd like to try some other options first as I'm concerned that the heat will melt the glue back in to a liquid and cause further damage.  Does anyone have any other suggestions for cleaning the glue out?  I'd considered alcohol, but I'm not sure what effect that would have on the internals of the switches.  Thanks!

-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-

Link to comment
Share on other sites

Link to post
Share on other sites

Absolutely not worth it, you would have to desolder all the switches, open all them, clean them thoroughly, likely have to lube them, close them all up, solder everything back together, only to have shitty switches on a very mediocre keyboard.

 

 

Sorry, but I'd recommend to just throw it out or something.

Quote me to see my reply!

SPECS:

CPU: Ryzen 7 3700X Motherboard: MSI B450-A Pro Max RAM: 32GB I forget GPU: MSI Vega 56 Storage: 256GB NVMe boot, 512GB Samsung 850 Pro, 1TB WD Blue SSD, 1TB WD Blue HDD PSU: Inwin P85 850w Case: Fractal Design Define C Cooling: Stock for CPU, be quiet! case fans, Morpheus Vega w/ be quiet! Pure Wings 2 for GPU Monitor: 3x Thinkvision P24Q on a Steelcase Eyesite triple monitor stand Mouse: Logitech MX Master 3 Keyboard: Focus FK-9000 (heavily modded) Mousepad: Aliexpress cat special Headphones:  Sennheiser HD598SE and Sony Linkbuds

 

🏳️‍🌈

Link to comment
Share on other sites

Link to post
Share on other sites

Depending on what glue was used you could try soaking the keyboard in a solvent that will destroy it. There's a chance that this will also destroy the keyboard, but this is probably your best bet of recovering it.

¯\_(ツ)_/¯

 

 

Desktop:

Intel Core i7-11700K | Noctua NH-D15S chromax.black | ASUS ROG Strix Z590-E Gaming WiFi  | 32 GB G.SKILL TridentZ 3200 MHz | ASUS TUF Gaming RTX 3080 | 1TB Samsung 980 Pro M.2 PCIe 4.0 SSD | 2TB WD Blue M.2 SATA SSD | Seasonic Focus GX-850 Fractal Design Meshify C Windows 10 Pro

 

Laptop:

HP Omen 15 | AMD Ryzen 7 5800H | 16 GB 3200 MHz | Nvidia RTX 3060 | 1 TB WD Black PCIe 3.0 SSD | 512 GB Micron PCIe 3.0 SSD | Windows 11

Link to comment
Share on other sites

Link to post
Share on other sites

8 minutes ago, AdvocateOfNyx said:

I'd considered alcohol, but I'm not sure what effect that would have on the internals of the switches.  Thanks!

Used isopropyl the other day to clean some spilled coffee 😅 out of my Corsair Strafe. Worked great.

 

Dishwasher probably won't do it.

 

You will need a lot of alcohol to undo the glue I think....

BabyBlu (Primary): 

  • CPU: Intel Core i9 9900K @ up to 5.3GHz, 5.0GHz all-core, delidded
  • Motherboard: Asus Maximus XI Hero
  • RAM: G.Skill Trident Z RGB 4x8GB DDR4-3200 @ 4000MHz 16-18-18-34
  • GPU: MSI RTX 2080 Sea Hawk EK X, 2070MHz core, 8000MHz mem
  • Case: Phanteks Evolv X
  • Storage: XPG SX8200 Pro 2TB, 3x ADATASU800 1TB (RAID 0), Samsung 970 EVO Plus 500GB
  • PSU: Corsair HX1000i
  • Display: MSI MPG341CQR 34" 3440x1440 144Hz Freesync, Dell S2417DG 24" 2560x1440 165Hz Gsync
  • Cooling: Custom water loop (CPU & GPU), Radiators: 1x140mm(Back), 1x280mm(Top), 1x420mm(Front)
  • Keyboard: Corsair Strafe RGB (Cherry MX Brown)
  • Mouse: MasterMouse MM710
  • Headset: Corsair Void Pro RGB
  • OS: Windows 10 Pro

Roxanne (Wife Build):

  • CPU: Intel Core i7 4790K @ up to 5.0GHz, 4.8Ghz all-core, relidded w/ LM
  • Motherboard: Asus Z97A
  • RAM: G.Skill Sniper 4x8GB DDR3-2400 @ 10-12-12-24
  • GPU: EVGA GTX 1080 FTW2 w/ LM
  • Case: Corsair Vengeance C70, w/ Custom Side-Panel Window
  • Storage: Samsung 850 EVO 250GB, Samsung 860 EVO 1TB, Silicon Power A80 2TB NVME
  • PSU: Corsair AX760
  • Display: Samsung C27JG56 27" 2560x1440 144Hz Freesync
  • Cooling: Corsair H115i RGB
  • Keyboard: GMMK TKL(Kailh Box White)
  • Mouse: Glorious Model O-
  • Headset: SteelSeries Arctis 7
  • OS: Windows 10 Pro

BigBox (HTPC):

  • CPU: Ryzen 5800X3D
  • Motherboard: Gigabyte B550i Aorus Pro AX
  • RAM: Corsair Vengeance LPX 2x8GB DDR4-3600 @ 3600MHz 14-14-14-28
  • GPU: MSI RTX 3080 Ventus 3X Plus OC, de-shrouded, LM TIM, replaced mem therm pads
  • Case: Fractal Design Node 202
  • Storage: SP A80 1TB, WD Black SN770 2TB
  • PSU: Corsair SF600 Gold w/ NF-A9x14
  • Display: Samsung QN90A 65" (QLED, 4K, 120Hz, HDR, VRR)
  • Cooling: Thermalright AXP-100 Copper w/ NF-A12x15
  • Keyboard/Mouse: Rii i4
  • Controllers: 4X Xbox One & 2X N64 (with USB)
  • Sound: Denon AVR S760H with 5.1.2 Atmos setup.
  • OS: Windows 10 Pro

Harmonic (NAS/Game/Plex/Other Server):

  • CPU: Intel Core i7 6700
  • Motherboard: ASRock FATAL1TY H270M
  • RAM: 64GB DDR4-2133
  • GPU: Intel HD Graphics 530
  • Case: Fractal Design Define 7
  • HDD: 3X Seagate Exos X16 14TB in RAID 5
  • SSD: Inland Premium 512GB NVME, Sabrent 1TB NVME
  • Optical: BDXL WH14NS40 flashed to WH16NS60
  • PSU: Corsair CX450
  • Display: None
  • Cooling: Noctua NH-U14S
  • Keyboard/Mouse: None
  • OS: Windows 10 Pro

NAS:

  • Synology DS216J
  • 2x8TB WD Red NAS HDDs in RAID 1. 8TB usable space
Link to comment
Share on other sites

Link to post
Share on other sites

Just now, narrdarr said:

Do you know what kind of glue was used?

Yeah, I asked just to make sure it wasn't superglue or anything.  It was just normal Elmer's glue.

-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, HairlessMonkeyBoy said:

Used isopropyl the other day to clean some spilled coffee 😅 out of my Corsair Strafe. Worked great.

 

Dishwasher probably won't do it.

 

You will need a lot of alcohol to undo the glue I think....

Alcohol was the most common result online so I figured it might do the trick but didn't know what exactly was appropriate to use.  What kind of alcohol did you use?

-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, kelvinhall05 said:

Absolutely not worth it, you would have to desolder all the switches, open all them, clean them thoroughly, likely have to lube them, close them all up, solder everything back together, only to have shitty switches on a very mediocre keyboard.

 

 

Sorry, but I'd recommend to just throw it out or something.

Yeah, I mean if I'm going to throw it out anyways I would almost certainly try some alcohol or the dishwasher first.  Worst case scenario the trash becomes even more trash.  I was just wondering if anyone had any specific suggestions.

-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-

Link to comment
Share on other sites

Link to post
Share on other sites

3 minutes ago, BobVonBob said:

Depending on what glue was used you could try soaking the keyboard in a solvent that will destroy it. There's a chance that this will also destroy the keyboard, but this is probably your best bet of recovering it.

It is just normal Elmer's glue.  Would standard isopropyl alcohol do the trick?

-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, AdvocateOfNyx said:

Yeah, I mean if I'm going to throw it out anyways I would almost certainly try some alcohol or the dishwasher first.  Worst case scenario the trash becomes even more trash.  I was just wondering if anyone had any specific suggestions.

You are going to have to clean the switches from the inside. To clean them from the inside, you have to open the switches, To open the switches, you have to desolder them.

Quote me to see my reply!

SPECS:

CPU: Ryzen 7 3700X Motherboard: MSI B450-A Pro Max RAM: 32GB I forget GPU: MSI Vega 56 Storage: 256GB NVMe boot, 512GB Samsung 850 Pro, 1TB WD Blue SSD, 1TB WD Blue HDD PSU: Inwin P85 850w Case: Fractal Design Define C Cooling: Stock for CPU, be quiet! case fans, Morpheus Vega w/ be quiet! Pure Wings 2 for GPU Monitor: 3x Thinkvision P24Q on a Steelcase Eyesite triple monitor stand Mouse: Logitech MX Master 3 Keyboard: Focus FK-9000 (heavily modded) Mousepad: Aliexpress cat special Headphones:  Sennheiser HD598SE and Sony Linkbuds

 

🏳️‍🌈

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, kelvinhall05 said:

You are going to have to clean the switches from the inside. To clean them from the inside, you have to open the switches, To open the switches, you have to desolder them.

Hmm, I see.  I might give it a shot anyways as I've seen a couple people claim to have success online, even if the odds are slim.  You're absolutely right though, desoldering them is not worth it at all.

-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-

Link to comment
Share on other sites

Link to post
Share on other sites

4 minutes ago, AdvocateOfNyx said:

It is just normal Elmer's glue.  Would standard isopropyl alcohol do the trick?

Elmer's white glue is water soluble. Give it a bath in warm water and move the switches around, leave it there for a while, then let it dry out for something like a day. Don't get your hopes up, but there's definitely a chance it's recoverable.

¯\_(ツ)_/¯

 

 

Desktop:

Intel Core i7-11700K | Noctua NH-D15S chromax.black | ASUS ROG Strix Z590-E Gaming WiFi  | 32 GB G.SKILL TridentZ 3200 MHz | ASUS TUF Gaming RTX 3080 | 1TB Samsung 980 Pro M.2 PCIe 4.0 SSD | 2TB WD Blue M.2 SATA SSD | Seasonic Focus GX-850 Fractal Design Meshify C Windows 10 Pro

 

Laptop:

HP Omen 15 | AMD Ryzen 7 5800H | 16 GB 3200 MHz | Nvidia RTX 3060 | 1 TB WD Black PCIe 3.0 SSD | 512 GB Micron PCIe 3.0 SSD | Windows 11

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, AdvocateOfNyx said:

What kind of alcohol did you use?

90(ish)% Isopropyl. I put some into a bottle I had with a small orifice, and kept pouring it slowly into the affected keys while actuating them. Then I left the keyboard to dry for a while. Isopropyl can damage some plastics I think, but in my case there was no harm done, and I'm typing on the keyboard now.

BabyBlu (Primary): 

  • CPU: Intel Core i9 9900K @ up to 5.3GHz, 5.0GHz all-core, delidded
  • Motherboard: Asus Maximus XI Hero
  • RAM: G.Skill Trident Z RGB 4x8GB DDR4-3200 @ 4000MHz 16-18-18-34
  • GPU: MSI RTX 2080 Sea Hawk EK X, 2070MHz core, 8000MHz mem
  • Case: Phanteks Evolv X
  • Storage: XPG SX8200 Pro 2TB, 3x ADATASU800 1TB (RAID 0), Samsung 970 EVO Plus 500GB
  • PSU: Corsair HX1000i
  • Display: MSI MPG341CQR 34" 3440x1440 144Hz Freesync, Dell S2417DG 24" 2560x1440 165Hz Gsync
  • Cooling: Custom water loop (CPU & GPU), Radiators: 1x140mm(Back), 1x280mm(Top), 1x420mm(Front)
  • Keyboard: Corsair Strafe RGB (Cherry MX Brown)
  • Mouse: MasterMouse MM710
  • Headset: Corsair Void Pro RGB
  • OS: Windows 10 Pro

Roxanne (Wife Build):

  • CPU: Intel Core i7 4790K @ up to 5.0GHz, 4.8Ghz all-core, relidded w/ LM
  • Motherboard: Asus Z97A
  • RAM: G.Skill Sniper 4x8GB DDR3-2400 @ 10-12-12-24
  • GPU: EVGA GTX 1080 FTW2 w/ LM
  • Case: Corsair Vengeance C70, w/ Custom Side-Panel Window
  • Storage: Samsung 850 EVO 250GB, Samsung 860 EVO 1TB, Silicon Power A80 2TB NVME
  • PSU: Corsair AX760
  • Display: Samsung C27JG56 27" 2560x1440 144Hz Freesync
  • Cooling: Corsair H115i RGB
  • Keyboard: GMMK TKL(Kailh Box White)
  • Mouse: Glorious Model O-
  • Headset: SteelSeries Arctis 7
  • OS: Windows 10 Pro

BigBox (HTPC):

  • CPU: Ryzen 5800X3D
  • Motherboard: Gigabyte B550i Aorus Pro AX
  • RAM: Corsair Vengeance LPX 2x8GB DDR4-3600 @ 3600MHz 14-14-14-28
  • GPU: MSI RTX 3080 Ventus 3X Plus OC, de-shrouded, LM TIM, replaced mem therm pads
  • Case: Fractal Design Node 202
  • Storage: SP A80 1TB, WD Black SN770 2TB
  • PSU: Corsair SF600 Gold w/ NF-A9x14
  • Display: Samsung QN90A 65" (QLED, 4K, 120Hz, HDR, VRR)
  • Cooling: Thermalright AXP-100 Copper w/ NF-A12x15
  • Keyboard/Mouse: Rii i4
  • Controllers: 4X Xbox One & 2X N64 (with USB)
  • Sound: Denon AVR S760H with 5.1.2 Atmos setup.
  • OS: Windows 10 Pro

Harmonic (NAS/Game/Plex/Other Server):

  • CPU: Intel Core i7 6700
  • Motherboard: ASRock FATAL1TY H270M
  • RAM: 64GB DDR4-2133
  • GPU: Intel HD Graphics 530
  • Case: Fractal Design Define 7
  • HDD: 3X Seagate Exos X16 14TB in RAID 5
  • SSD: Inland Premium 512GB NVME, Sabrent 1TB NVME
  • Optical: BDXL WH14NS40 flashed to WH16NS60
  • PSU: Corsair CX450
  • Display: None
  • Cooling: Noctua NH-U14S
  • Keyboard/Mouse: None
  • OS: Windows 10 Pro

NAS:

  • Synology DS216J
  • 2x8TB WD Red NAS HDDs in RAID 1. 8TB usable space
Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, AdvocateOfNyx said:

It is just normal Elmer's glue.  Would standard isopropyl alcohol do the trick?

IA will work. So should steam.

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, BobVonBob said:

Elmer's white glue is water soluble. Give it a bath in warm water and move the switches around, leave it there for a while, then let it dry out for something like a day. Don't get your hopes up, but there's definitely a chance it's recoverable.

When you say a bath in warm water, do you mean like actually submerge the keyboard in water?  I might misunderstand, but as far as I know it isn't usually a good idea to put something electronic in water as it's able to cause damage while alcohol is much less likely to cause damage to the circuit board inside of the keyboard.

 

If I do submerge it in water, won't that essentially kill the board inside?

-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, AdvocateOfNyx said:

won't that essentially kill the board inside?

No. It's only bad when the board is powered up. As long as you wait for it to dry thoroughly you should be fine.

BabyBlu (Primary): 

  • CPU: Intel Core i9 9900K @ up to 5.3GHz, 5.0GHz all-core, delidded
  • Motherboard: Asus Maximus XI Hero
  • RAM: G.Skill Trident Z RGB 4x8GB DDR4-3200 @ 4000MHz 16-18-18-34
  • GPU: MSI RTX 2080 Sea Hawk EK X, 2070MHz core, 8000MHz mem
  • Case: Phanteks Evolv X
  • Storage: XPG SX8200 Pro 2TB, 3x ADATASU800 1TB (RAID 0), Samsung 970 EVO Plus 500GB
  • PSU: Corsair HX1000i
  • Display: MSI MPG341CQR 34" 3440x1440 144Hz Freesync, Dell S2417DG 24" 2560x1440 165Hz Gsync
  • Cooling: Custom water loop (CPU & GPU), Radiators: 1x140mm(Back), 1x280mm(Top), 1x420mm(Front)
  • Keyboard: Corsair Strafe RGB (Cherry MX Brown)
  • Mouse: MasterMouse MM710
  • Headset: Corsair Void Pro RGB
  • OS: Windows 10 Pro

Roxanne (Wife Build):

  • CPU: Intel Core i7 4790K @ up to 5.0GHz, 4.8Ghz all-core, relidded w/ LM
  • Motherboard: Asus Z97A
  • RAM: G.Skill Sniper 4x8GB DDR3-2400 @ 10-12-12-24
  • GPU: EVGA GTX 1080 FTW2 w/ LM
  • Case: Corsair Vengeance C70, w/ Custom Side-Panel Window
  • Storage: Samsung 850 EVO 250GB, Samsung 860 EVO 1TB, Silicon Power A80 2TB NVME
  • PSU: Corsair AX760
  • Display: Samsung C27JG56 27" 2560x1440 144Hz Freesync
  • Cooling: Corsair H115i RGB
  • Keyboard: GMMK TKL(Kailh Box White)
  • Mouse: Glorious Model O-
  • Headset: SteelSeries Arctis 7
  • OS: Windows 10 Pro

BigBox (HTPC):

  • CPU: Ryzen 5800X3D
  • Motherboard: Gigabyte B550i Aorus Pro AX
  • RAM: Corsair Vengeance LPX 2x8GB DDR4-3600 @ 3600MHz 14-14-14-28
  • GPU: MSI RTX 3080 Ventus 3X Plus OC, de-shrouded, LM TIM, replaced mem therm pads
  • Case: Fractal Design Node 202
  • Storage: SP A80 1TB, WD Black SN770 2TB
  • PSU: Corsair SF600 Gold w/ NF-A9x14
  • Display: Samsung QN90A 65" (QLED, 4K, 120Hz, HDR, VRR)
  • Cooling: Thermalright AXP-100 Copper w/ NF-A12x15
  • Keyboard/Mouse: Rii i4
  • Controllers: 4X Xbox One & 2X N64 (with USB)
  • Sound: Denon AVR S760H with 5.1.2 Atmos setup.
  • OS: Windows 10 Pro

Harmonic (NAS/Game/Plex/Other Server):

  • CPU: Intel Core i7 6700
  • Motherboard: ASRock FATAL1TY H270M
  • RAM: 64GB DDR4-2133
  • GPU: Intel HD Graphics 530
  • Case: Fractal Design Define 7
  • HDD: 3X Seagate Exos X16 14TB in RAID 5
  • SSD: Inland Premium 512GB NVME, Sabrent 1TB NVME
  • Optical: BDXL WH14NS40 flashed to WH16NS60
  • PSU: Corsair CX450
  • Display: None
  • Cooling: Noctua NH-U14S
  • Keyboard/Mouse: None
  • OS: Windows 10 Pro

NAS:

  • Synology DS216J
  • 2x8TB WD Red NAS HDDs in RAID 1. 8TB usable space
Link to comment
Share on other sites

Link to post
Share on other sites

4 minutes ago, BobVonBob said:

Elmer's white glue is water soluble. Give it a bath in warm water and move the switches around, leave it there for a while, then let it dry out for something like a day. Don't get your hopes up, but there's definitely a chance it's recoverable.

This will likely make it even worse. Have fun trying to thoroughly rinse out the insides of the switches and dry them out.

Quote me to see my reply!

SPECS:

CPU: Ryzen 7 3700X Motherboard: MSI B450-A Pro Max RAM: 32GB I forget GPU: MSI Vega 56 Storage: 256GB NVMe boot, 512GB Samsung 850 Pro, 1TB WD Blue SSD, 1TB WD Blue HDD PSU: Inwin P85 850w Case: Fractal Design Define C Cooling: Stock for CPU, be quiet! case fans, Morpheus Vega w/ be quiet! Pure Wings 2 for GPU Monitor: 3x Thinkvision P24Q on a Steelcase Eyesite triple monitor stand Mouse: Logitech MX Master 3 Keyboard: Focus FK-9000 (heavily modded) Mousepad: Aliexpress cat special Headphones:  Sennheiser HD598SE and Sony Linkbuds

 

🏳️‍🌈

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, kelvinhall05 said:

This will likely make it even worse. Have fun trying to thoroughly rinse out the insides of the switches and dry them out.

It's already trashed, you can't break it more. If it doesn't work they're back where they were, if it does then that's a keyboard they don't need to buy.

¯\_(ツ)_/¯

 

 

Desktop:

Intel Core i7-11700K | Noctua NH-D15S chromax.black | ASUS ROG Strix Z590-E Gaming WiFi  | 32 GB G.SKILL TridentZ 3200 MHz | ASUS TUF Gaming RTX 3080 | 1TB Samsung 980 Pro M.2 PCIe 4.0 SSD | 2TB WD Blue M.2 SATA SSD | Seasonic Focus GX-850 Fractal Design Meshify C Windows 10 Pro

 

Laptop:

HP Omen 15 | AMD Ryzen 7 5800H | 16 GB 3200 MHz | Nvidia RTX 3060 | 1 TB WD Black PCIe 3.0 SSD | 512 GB Micron PCIe 3.0 SSD | Windows 11

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, BobVonBob said:

It's already trashed, you can't break it more. If it doesn't work they're back where they were, if it does then that's a keyboard they don't need to buy.

Yes, you can break it more, and having water that can't easily air dry inside the switches with contacts inside is going to destroy this board even more.

Quote me to see my reply!

SPECS:

CPU: Ryzen 7 3700X Motherboard: MSI B450-A Pro Max RAM: 32GB I forget GPU: MSI Vega 56 Storage: 256GB NVMe boot, 512GB Samsung 850 Pro, 1TB WD Blue SSD, 1TB WD Blue HDD PSU: Inwin P85 850w Case: Fractal Design Define C Cooling: Stock for CPU, be quiet! case fans, Morpheus Vega w/ be quiet! Pure Wings 2 for GPU Monitor: 3x Thinkvision P24Q on a Steelcase Eyesite triple monitor stand Mouse: Logitech MX Master 3 Keyboard: Focus FK-9000 (heavily modded) Mousepad: Aliexpress cat special Headphones:  Sennheiser HD598SE and Sony Linkbuds

 

🏳️‍🌈

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, kelvinhall05 said:

Yes, you can break it more, and having water that can't easily air dry inside the switches with contacts inside is going to destroy this board even more.

Then provide another fix. At least there's a chance this will work, "Just give up and throw it out" has no chance of resulting in a working keyboard, and if it's broken more who cares? It was already broken anyway.

¯\_(ツ)_/¯

 

 

Desktop:

Intel Core i7-11700K | Noctua NH-D15S chromax.black | ASUS ROG Strix Z590-E Gaming WiFi  | 32 GB G.SKILL TridentZ 3200 MHz | ASUS TUF Gaming RTX 3080 | 1TB Samsung 980 Pro M.2 PCIe 4.0 SSD | 2TB WD Blue M.2 SATA SSD | Seasonic Focus GX-850 Fractal Design Meshify C Windows 10 Pro

 

Laptop:

HP Omen 15 | AMD Ryzen 7 5800H | 16 GB 3200 MHz | Nvidia RTX 3060 | 1 TB WD Black PCIe 3.0 SSD | 512 GB Micron PCIe 3.0 SSD | Windows 11

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, BobVonBob said:

Then provide another fix. At least there's a chance this will work, "Just give up and throw it out" has no chance of resulting in a working keyboard, and if it's broken more who cares? It was already broken anyway.

If OP is going to try and fix it (not worth it), he should do it the proper way and desolder all the switches that need cleaning, open them, clean them manually by hand or in an ultrasonic cleaner, reassemble them, and resolder them. Soaking the entire keyboard in water is not going to work, the water inside the switches will not evaporate, and if somehow it does manage to evaporate, it will leave behind residue from the glue and won't fix his issue at all.

Quote me to see my reply!

SPECS:

CPU: Ryzen 7 3700X Motherboard: MSI B450-A Pro Max RAM: 32GB I forget GPU: MSI Vega 56 Storage: 256GB NVMe boot, 512GB Samsung 850 Pro, 1TB WD Blue SSD, 1TB WD Blue HDD PSU: Inwin P85 850w Case: Fractal Design Define C Cooling: Stock for CPU, be quiet! case fans, Morpheus Vega w/ be quiet! Pure Wings 2 for GPU Monitor: 3x Thinkvision P24Q on a Steelcase Eyesite triple monitor stand Mouse: Logitech MX Master 3 Keyboard: Focus FK-9000 (heavily modded) Mousepad: Aliexpress cat special Headphones:  Sennheiser HD598SE and Sony Linkbuds

 

🏳️‍🌈

Link to comment
Share on other sites

Link to post
Share on other sites

 

The board probably has outemu blues in it, they aren't worth cleaning. Just buy a set of switches that you like, desolder the old and solder in the new switches and enjoy a like new board.

Link to comment
Share on other sites

Link to post
Share on other sites

On 6/18/2020 at 2:59 PM, HairlessMonkeyBoy said:

90(ish)% Isopropyl. I put some into a bottle I had with a small orifice, and kept pouring it slowly into the affected keys while actuating them. Then I left the keyboard to dry for a while. Isopropyl can damage some plastics I think, but in my case there was no harm done, and I'm typing on the keyboard now.

70% isopropyl (what I had on hand) did the trick for me!  It look three sessions of pouring a small amount in to the switch and blowing it out with compressed air.  Some of them feel almost normal but have a dampened sound, and others feel a little weird, however all keys now work properly!  I'm sure if I cared I could make some of them better, but every letter and common modifier keys feel absolutely perfect!  Thanks so much.  

-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-=+=-

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, AdvocateOfNyx said:

I'm sure if I cared I could make some of them better

My right shift is still a bit mooshy, too. But considering I literally never use it...

 

I'm really glad you got it working! 😁

BabyBlu (Primary): 

  • CPU: Intel Core i9 9900K @ up to 5.3GHz, 5.0GHz all-core, delidded
  • Motherboard: Asus Maximus XI Hero
  • RAM: G.Skill Trident Z RGB 4x8GB DDR4-3200 @ 4000MHz 16-18-18-34
  • GPU: MSI RTX 2080 Sea Hawk EK X, 2070MHz core, 8000MHz mem
  • Case: Phanteks Evolv X
  • Storage: XPG SX8200 Pro 2TB, 3x ADATASU800 1TB (RAID 0), Samsung 970 EVO Plus 500GB
  • PSU: Corsair HX1000i
  • Display: MSI MPG341CQR 34" 3440x1440 144Hz Freesync, Dell S2417DG 24" 2560x1440 165Hz Gsync
  • Cooling: Custom water loop (CPU & GPU), Radiators: 1x140mm(Back), 1x280mm(Top), 1x420mm(Front)
  • Keyboard: Corsair Strafe RGB (Cherry MX Brown)
  • Mouse: MasterMouse MM710
  • Headset: Corsair Void Pro RGB
  • OS: Windows 10 Pro

Roxanne (Wife Build):

  • CPU: Intel Core i7 4790K @ up to 5.0GHz, 4.8Ghz all-core, relidded w/ LM
  • Motherboard: Asus Z97A
  • RAM: G.Skill Sniper 4x8GB DDR3-2400 @ 10-12-12-24
  • GPU: EVGA GTX 1080 FTW2 w/ LM
  • Case: Corsair Vengeance C70, w/ Custom Side-Panel Window
  • Storage: Samsung 850 EVO 250GB, Samsung 860 EVO 1TB, Silicon Power A80 2TB NVME
  • PSU: Corsair AX760
  • Display: Samsung C27JG56 27" 2560x1440 144Hz Freesync
  • Cooling: Corsair H115i RGB
  • Keyboard: GMMK TKL(Kailh Box White)
  • Mouse: Glorious Model O-
  • Headset: SteelSeries Arctis 7
  • OS: Windows 10 Pro

BigBox (HTPC):

  • CPU: Ryzen 5800X3D
  • Motherboard: Gigabyte B550i Aorus Pro AX
  • RAM: Corsair Vengeance LPX 2x8GB DDR4-3600 @ 3600MHz 14-14-14-28
  • GPU: MSI RTX 3080 Ventus 3X Plus OC, de-shrouded, LM TIM, replaced mem therm pads
  • Case: Fractal Design Node 202
  • Storage: SP A80 1TB, WD Black SN770 2TB
  • PSU: Corsair SF600 Gold w/ NF-A9x14
  • Display: Samsung QN90A 65" (QLED, 4K, 120Hz, HDR, VRR)
  • Cooling: Thermalright AXP-100 Copper w/ NF-A12x15
  • Keyboard/Mouse: Rii i4
  • Controllers: 4X Xbox One & 2X N64 (with USB)
  • Sound: Denon AVR S760H with 5.1.2 Atmos setup.
  • OS: Windows 10 Pro

Harmonic (NAS/Game/Plex/Other Server):

  • CPU: Intel Core i7 6700
  • Motherboard: ASRock FATAL1TY H270M
  • RAM: 64GB DDR4-2133
  • GPU: Intel HD Graphics 530
  • Case: Fractal Design Define 7
  • HDD: 3X Seagate Exos X16 14TB in RAID 5
  • SSD: Inland Premium 512GB NVME, Sabrent 1TB NVME
  • Optical: BDXL WH14NS40 flashed to WH16NS60
  • PSU: Corsair CX450
  • Display: None
  • Cooling: Noctua NH-U14S
  • Keyboard/Mouse: None
  • OS: Windows 10 Pro

NAS:

  • Synology DS216J
  • 2x8TB WD Red NAS HDDs in RAID 1. 8TB usable space
Link to comment
Share on other sites

Link to post
Share on other sites

On 6/18/2020 at 2:41 PM, AdvocateOfNyx said:

Sadly, this keyboard like many others doesn't have user swappable switches, so it seems as though my only option is to clean them.

some newer version does have swapable switches ... i have one ... and no I didn't had to desolder them ... those outemu have some sleeves on the pins, the sleeves are soldered...  They are ridiculously hard to pull out and I did manage to break some little plastic tab meant to retain the switch in place as if those would need it.  I had to use a small knife to lift one side of the switch while pressing on the retaining tab and then the other side.  I didn't have a switch pullet when I did that ... and even with the switch puller I often had to lift the switch with the knife cause those pins are soooo thigh in the sleeves. 

 

I put those switches on my gmmk barebone and use them while waiting for my kailh to arrive and then I put the outemu back on the redragon and it's good as new. 

 

Note that the redragon k552 is only compatible with outemu switches.

 

20200517_192451.jpg

 

 

 

 

20200517_200936.thumb.jpg.6d127c44f28307f05634fab2935da689.jpg

I9 10850K

EVGA RTX 3080 TI FTW3 ULTRA

32 Gb Crucial Balistix ddr4 3600mHz 16-18-18-38

MSI Z490 Tomahawk

Fractal Design Ion+ 860W platinum

Arctic Liquid Freezer II, 360mm

WB Black SN750 NVMe ssd

TeamGroup L5 3D Lite 1 Tb sata SSD

 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×