Built a new computer and can not get it to boot into windows OS install

[Mknutson]

Hello i just built a computer and when i turn it on i can get into the Bios screen but afterwards the screen is just blank

[berberries]

go into boot preferences in the bios and make sure that the first one is your windows install ssd

[Mknutson]

There is nothing on my m.2 ssd i am trying to boot it from a usb to install it on my m.2 drive

[KhakiHat]

Does the USB media you are using work properly?

 

Pressing F2, DEL, F11, or F12 usually let's you enter your bios menu or a boot device selection.

[Nixxie_Spark]

You will need to install windows onto the M.2 correctly, here is a handy guide I used:

 

The NVMe M.2 drive should be the only storage drive connected.

NVMe SSDs do not appear within the BIOS until Windows creates the system partition with the EFI Boot Sector. Your M.2 SSD contains UEFI driver information within the firmware. By disabling the CSM module, Windows will read and utilize the M.2-specific UEFI driver

1. Go into the BIOS, under the boot tab there is an option for CSM. Make sure it is disabled.
2. Click on the secure boot option below and make sure it is set to another OS, not windows UEFI.
3. Click on key management and clear secure boot keys.
4. Insert a USB memory stick with a bootable UEFI USB drive with Windows 10 Setup* on it, USB3 is quicker but USB2 works too. A Windows DVD won’t work unless you’ve created your own UEFI Bootable DVD.
5. Press F10 to save, exit and reboot.
6. Windows 10 will now start installing to your NVME drive as it has its own NVME driver built in.
7. When the PC reboots hit F2 to go back into the BIOS, you will see under boot priority that windows boot manager now lists your NVME drive.
8. Click on secure boot again but now set it to Windows UEFI mode.
9. Click on key management and install default secure boot keys
10. Press F10 to save and exit, Windows will finish the install. Once you have Windows up and running, shutdown the PC and reconnect your other SATA drives.

*You can obtain the ISO file here:
https://www.microsoft.com/en-us/software-download/windows10

[Mknutson]

5 minutes ago, Nixxie_Spark said:

You will need to install windows onto the M.2 correctly, here is a handy guide I used:

 

The NVMe M.2 drive should be the only storage drive connected.

NVMe SSDs do not appear within the BIOS until Windows creates the system partition with the EFI Boot Sector. Your M.2 SSD contains UEFI driver information within the firmware. By disabling the CSM module, Windows will read and utilize the M.2-specific UEFI driver

1. Go into the BIOS, under the boot tab there is an option for CSM. Make sure it is disabled.
2. Click on the secure boot option below and make sure it is set to another OS, not windows UEFI.
3. Click on key management and clear secure boot keys.
4. Insert a USB memory stick with a bootable UEFI USB drive with Windows 10 Setup* on it, USB3 is quicker but USB2 works too. A Windows DVD won’t work unless you’ve created your own UEFI Bootable DVD.
5. Press F10 to save, exit and reboot.
6. Windows 10 will now start installing to your NVME drive as it has its own NVME driver built in.
7. When the PC reboots hit F2 to go back into the BIOS, you will see under boot priority that windows boot manager now lists your NVME drive.
8. Click on secure boot again but now set it to Windows UEFI mode.
9. Click on key management and install default secure boot keys
10. Press F10 to save and exit, Windows will finish the install. Once you have Windows up and running, shutdown the PC and reconnect your other SATA drives.

*You can obtain the ISO file here:
https://www.microsoft.com/en-us/software-download/windows10

@Nixxie_Spark where do i find all of that on my tomahawk b450 max motherboard

[Mknutson]

@KhakiHat i am pretty sure it work the windows logo comes up for a minute then it just sits at that screen