Jump to content

RAM stopped working at rated speed

After seeing something about pbo not allowing ryzen to go to a resting state in a hardwarecanucks video. They said to make sure the chipset drivers were up to date. So I went to asus page for my board and got the drivers. 
 

needed to restart. Now I’m boot looping. 
the system will boot after resetting the bios and not having dcop on. 
 

I had all 64gb running at dcop standards before this bullshit. I’m looking for a solution to get back to that. I know I could pull half the ram and probably have it working. 

3600cl16 4x16 

trident z neo

 

Anyone else having problems like this?

Can you get older chipset drivers?
 

Link to comment
Share on other sites

Link to post
Share on other sites

Tried 2nd to most recent chipset drivers. Still boot looping on dcop

Link to comment
Share on other sites

Link to post
Share on other sites

23 minutes ago, StarsMars said:

Tried 2nd to most recent chipset drivers. Still boot looping on dcop

try clearing the cmos 

PC: Motherboard: ASUS B550M TUF-Plus, CPU: Ryzen 3 3100, CPU Cooler: Arctic Freezer 34, GPU: GIGABYTE WindForce GTX1650S, RAM: HyperX Fury RGB 2x8GB 3200 CL16, Case, CoolerMaster MB311L ARGB, Boot Drive: 250GB MX500, Game Drive: WD Blue 1TB 7200RPM HDD.

 

Peripherals: GK61 (Optical Gateron Red) with Mistel White/Orange keycaps, Logitech G102 (Purple), BitWit Ensemble Grey Deskpad. 

 

Audio: Logitech G432, Moondrop Starfield, Mic: Razer Siren Mini (White).

 

Phone: Pixel 3a (Purple-ish).

 

Build Log: 

Link to comment
Share on other sites

Link to post
Share on other sites

1 hour ago, StarsMars said:

the system will boot after resetting the bios

 

16 minutes ago, TofuHaroto said:

try clearing the cmos 

Yup. Already did. 

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, StarsMars said:

 

Yup. Already did. 

oh my bad didnt see lol 

PC: Motherboard: ASUS B550M TUF-Plus, CPU: Ryzen 3 3100, CPU Cooler: Arctic Freezer 34, GPU: GIGABYTE WindForce GTX1650S, RAM: HyperX Fury RGB 2x8GB 3200 CL16, Case, CoolerMaster MB311L ARGB, Boot Drive: 250GB MX500, Game Drive: WD Blue 1TB 7200RPM HDD.

 

Peripherals: GK61 (Optical Gateron Red) with Mistel White/Orange keycaps, Logitech G102 (Purple), BitWit Ensemble Grey Deskpad. 

 

Audio: Logitech G432, Moondrop Starfield, Mic: Razer Siren Mini (White).

 

Phone: Pixel 3a (Purple-ish).

 

Build Log: 

Link to comment
Share on other sites

Link to post
Share on other sites

17 minutes ago, TofuHaroto said:

oh my bad didnt see lol 

No worries.

 

Tried pulling 2 sticks. Doesn't run dcop on one kit either now.

It worked until this morning when I updated the chipset driver.

At a loss right now. Gskill customer support is down currently

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, StarsMars said:

No worries.

 

Tried pulling 2 sticks. Doesn't run dcop on one kit either now.

It worked until this morning when I updated the chipset driver.

At a loss right now. Gskill customer support is down currently

try maybe manually ocing it if that works then its probably good to go 

and you wont need the dcop/ xmp profile 

PC: Motherboard: ASUS B550M TUF-Plus, CPU: Ryzen 3 3100, CPU Cooler: Arctic Freezer 34, GPU: GIGABYTE WindForce GTX1650S, RAM: HyperX Fury RGB 2x8GB 3200 CL16, Case, CoolerMaster MB311L ARGB, Boot Drive: 250GB MX500, Game Drive: WD Blue 1TB 7200RPM HDD.

 

Peripherals: GK61 (Optical Gateron Red) with Mistel White/Orange keycaps, Logitech G102 (Purple), BitWit Ensemble Grey Deskpad. 

 

Audio: Logitech G432, Moondrop Starfield, Mic: Razer Siren Mini (White).

 

Phone: Pixel 3a (Purple-ish).

 

Build Log: 

Link to comment
Share on other sites

Link to post
Share on other sites

1 hour ago, TofuHaroto said:

try maybe manually ocing it if that works then its probably good to go 

and you wont need the dcop/ xmp profile 

Tried that and tried using memory calculator. Idk what the deal is. This stuff worked fine from the time I installled it months ago until this morning after the driver

 

old drivers aren’t working

Link to comment
Share on other sites

Link to post
Share on other sites

3 minutes ago, StarsMars said:

Bump

I'm trying to think maybe try one stick and see if that works and work your way up

PC: Motherboard: ASUS B550M TUF-Plus, CPU: Ryzen 3 3100, CPU Cooler: Arctic Freezer 34, GPU: GIGABYTE WindForce GTX1650S, RAM: HyperX Fury RGB 2x8GB 3200 CL16, Case, CoolerMaster MB311L ARGB, Boot Drive: 250GB MX500, Game Drive: WD Blue 1TB 7200RPM HDD.

 

Peripherals: GK61 (Optical Gateron Red) with Mistel White/Orange keycaps, Logitech G102 (Purple), BitWit Ensemble Grey Deskpad. 

 

Audio: Logitech G432, Moondrop Starfield, Mic: Razer Siren Mini (White).

 

Phone: Pixel 3a (Purple-ish).

 

Build Log: 

Link to comment
Share on other sites

Link to post
Share on other sites

40 minutes ago, TofuHaroto said:

I'm trying to think maybe try one stick and see if that works and work your way up

Right now I’m at work and memtest86 is running on the pc at home. 
appreciate the help

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, StarsMars said:

Right now I’m at work and memtest86 is running on the pc at home. 
appreciate the help

Any time 

And good luck, hope it works :D

PC: Motherboard: ASUS B550M TUF-Plus, CPU: Ryzen 3 3100, CPU Cooler: Arctic Freezer 34, GPU: GIGABYTE WindForce GTX1650S, RAM: HyperX Fury RGB 2x8GB 3200 CL16, Case, CoolerMaster MB311L ARGB, Boot Drive: 250GB MX500, Game Drive: WD Blue 1TB 7200RPM HDD.

 

Peripherals: GK61 (Optical Gateron Red) with Mistel White/Orange keycaps, Logitech G102 (Purple), BitWit Ensemble Grey Deskpad. 

 

Audio: Logitech G432, Moondrop Starfield, Mic: Razer Siren Mini (White).

 

Phone: Pixel 3a (Purple-ish).

 

Build Log: 

Link to comment
Share on other sites

Link to post
Share on other sites

Memtest took 13hiurs and 45 minutes. No errors. Still won’t boot under xmp

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, StarsMars said:

Memtest took 13hiurs and 45 minutes. No errors. Still won’t boot under xmp

I know this is a stupid question but do you have the dimms in 2 and 4 right ?

PC: Motherboard: ASUS B550M TUF-Plus, CPU: Ryzen 3 3100, CPU Cooler: Arctic Freezer 34, GPU: GIGABYTE WindForce GTX1650S, RAM: HyperX Fury RGB 2x8GB 3200 CL16, Case, CoolerMaster MB311L ARGB, Boot Drive: 250GB MX500, Game Drive: WD Blue 1TB 7200RPM HDD.

 

Peripherals: GK61 (Optical Gateron Red) with Mistel White/Orange keycaps, Logitech G102 (Purple), BitWit Ensemble Grey Deskpad. 

 

Audio: Logitech G432, Moondrop Starfield, Mic: Razer Siren Mini (White).

 

Phone: Pixel 3a (Purple-ish).

 

Build Log: 

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, TofuHaroto said:

I know this is a stupid question but do you have the dimms in 2 and 4 right ?

It’s all 4 dimms. 4 sticks. 
 

idk if I’m just SOL if it refuses to run at rated speeds or if gskill is going to help out

Link to comment
Share on other sites

Link to post
Share on other sites

19 minutes ago, StarsMars said:

It’s all 4 dimms. 4 sticks. 
 

idk if I’m just SOL if it refuses to run at rated speeds or if gskill is going to help out

I don't know at this point I'm trying to think if it only happened when you flashed it with the new one

This is also a stupid question but you made sure your flashed it correctly right 

Like 10000% correctly

PC: Motherboard: ASUS B550M TUF-Plus, CPU: Ryzen 3 3100, CPU Cooler: Arctic Freezer 34, GPU: GIGABYTE WindForce GTX1650S, RAM: HyperX Fury RGB 2x8GB 3200 CL16, Case, CoolerMaster MB311L ARGB, Boot Drive: 250GB MX500, Game Drive: WD Blue 1TB 7200RPM HDD.

 

Peripherals: GK61 (Optical Gateron Red) with Mistel White/Orange keycaps, Logitech G102 (Purple), BitWit Ensemble Grey Deskpad. 

 

Audio: Logitech G432, Moondrop Starfield, Mic: Razer Siren Mini (White).

 

Phone: Pixel 3a (Purple-ish).

 

Build Log: 

Link to comment
Share on other sites

Link to post
Share on other sites

37 minutes ago, TofuHaroto said:

I don't know at this point I'm trying to think if it only happened when you flashed it with the new one

This is also a stupid question but you made sure your flashed it correctly right 

Like 10000% correctly

I used Asus ez flash from the bios with ethernet.  It reset before it began but it was already up to date.

 

i just tried updating with a usb. It took it but didn’t fix the problem with dcop. And just now I tried a previous bios with usb. Still no fix. 

Link to comment
Share on other sites

Link to post
Share on other sites

Ok, a previous bios Version 2901 allowed the system to boot under D.C.O.P standards. After some memory training loops.

 

I'm scared to touch the bios again after this. Damn..

Link to comment
Share on other sites

Link to post
Share on other sites

8 minutes ago, StarsMars said:

Ok, a previous bios Version 2901 allowed the system to boot under D.C.O.P standards. After some memory training loops.

 

I'm scared to touch the bios again after this. Damn..

When you flash the bios make sure it's 100% no 1000% good and watch every review :)

PC: Motherboard: ASUS B550M TUF-Plus, CPU: Ryzen 3 3100, CPU Cooler: Arctic Freezer 34, GPU: GIGABYTE WindForce GTX1650S, RAM: HyperX Fury RGB 2x8GB 3200 CL16, Case, CoolerMaster MB311L ARGB, Boot Drive: 250GB MX500, Game Drive: WD Blue 1TB 7200RPM HDD.

 

Peripherals: GK61 (Optical Gateron Red) with Mistel White/Orange keycaps, Logitech G102 (Purple), BitWit Ensemble Grey Deskpad. 

 

Audio: Logitech G432, Moondrop Starfield, Mic: Razer Siren Mini (White).

 

Phone: Pixel 3a (Purple-ish).

 

Build Log: 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×