Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

Hi, I have been overclocking my Ryzen 3600 with Ryzen master. I have achieved 4.3ghz at 1.375v. I was able to push 4.5ghz but the voltage was around 1.42v. I confused with these voltages because 1.42v seems high but stock the voltage is peaking 1.44v. Whats going on here?

 

NOTE: Temps are fine, it's watercooled, and has a x370 mobo. Ram is underclocked to 2133 because of weird compatibility issue.

Victor F. 

My hobbies include: machining, electronics, radiation, and guns

DESKTOP: CPU: Ryzen 5 3600  Motherboard: Asus ROG B550-I RAM: Corsair Vegenence DDR4-3000 SSD: Samsung 970 Pro GPU: MSI GTX1070 Ti Titanium CASE: NZXT H1

LAPTOP: Apple MacBook Pro i7, 16gb ram, 256gb ssd. (2018 model) 

CAMERA: Panasonic Lumix G85

PHONE: iPhone 7 

DRONE: Dji Mavic Pro

Link to post
Share on other sites

It's only safe to run high voltage in low core count workloads, if you say run Prime95 it will not go over 1.3V stock. Safe voltage for all core OC is actually somewhere around 1.3V, so your OC is entirely unsafe.

 

and btw, without clocking the memory higher overclocking the core will not help performance very much.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites

i managed to get 4.5 at 1.35 out of mine... 4.3 at 1.28 or so

 

those are a tad high for all-core voltages. i know that PBO likes to play silly buggers with this (at least in my experience) and set roughly 1.4v as an all-core boost but you'll probably find you can tame that back manually just fine. Start at 4.2/1.277 and work up.

get money, acquire catboys, fold proteins

 

systems:

Spoiler

Main - Zenith.
R9 3900x 4.25GHz All-Core // X570 Aorus Ultra // 32GB Predator 3200MHz // 3090 FTW3 Ultra // Meshify 2 White

 

TV / Folding / VR machine - The Hiss.

R5 5600 4.7GHz All-Core // B550-F // 16GB Crucial DDR4 3200MHz // 2080Ti Lightning Z // Meshify S2 White/Black (Foam Filter Delete)

 

Laptop / 3D Printer Driver/Workstation

i7-8750H // Asus FX705GM // 32GB 2400MHz // 1060 6GB

 

Link to post
Share on other sites
16 hours ago, Jurrunio said:

It's only safe to run high voltage in low core count workloads, if you say run Prime95 it will not go over 1.3V stock. Safe voltage for all core OC is actually somewhere around 1.3V, so your OC is entirely unsafe.

 

and btw, without clocking the memory higher overclocking the core will not help performance very much.

I was able to get the voltage down to 1.2875v ill try to go lower. I thought it was unsafe over 1.4v.

Victor F. 

My hobbies include: machining, electronics, radiation, and guns

DESKTOP: CPU: Ryzen 5 3600  Motherboard: Asus ROG B550-I RAM: Corsair Vegenence DDR4-3000 SSD: Samsung 970 Pro GPU: MSI GTX1070 Ti Titanium CASE: NZXT H1

LAPTOP: Apple MacBook Pro i7, 16gb ram, 256gb ssd. (2018 model) 

CAMERA: Panasonic Lumix G85

PHONE: iPhone 7 

DRONE: Dji Mavic Pro

Link to post
Share on other sites
17 hours ago, Jurrunio said:

It's only safe to run high voltage in low core count workloads, if you say run Prime95 it will not go over 1.3V stock. Safe voltage for all core OC is actually somewhere around 1.3V, so your OC is entirely unsafe.

 

and btw, without clocking the memory higher overclocking the core will not help performance very much.

I tried overclocking the ram and found that the reason I never kept it overclocked was because games like Rainbow six siege would crash at random times.

Victor F. 

My hobbies include: machining, electronics, radiation, and guns

DESKTOP: CPU: Ryzen 5 3600  Motherboard: Asus ROG B550-I RAM: Corsair Vegenence DDR4-3000 SSD: Samsung 970 Pro GPU: MSI GTX1070 Ti Titanium CASE: NZXT H1

LAPTOP: Apple MacBook Pro i7, 16gb ram, 256gb ssd. (2018 model) 

CAMERA: Panasonic Lumix G85

PHONE: iPhone 7 

DRONE: Dji Mavic Pro

Link to post
Share on other sites
1 hour ago, anonvx said:

I tried overclocking the ram and found that the reason I never kept it overclocked was because games like Rainbow six siege would crash at random times.

What does the memory kit rated for?

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
1 hour ago, Jurrunio said:

What does the memory kit rated for?

the memory kit is rated for 3000mhz and 15-17-17-35. XMP had a preset profile with the right numbers.

Victor F. 

My hobbies include: machining, electronics, radiation, and guns

DESKTOP: CPU: Ryzen 5 3600  Motherboard: Asus ROG B550-I RAM: Corsair Vegenence DDR4-3000 SSD: Samsung 970 Pro GPU: MSI GTX1070 Ti Titanium CASE: NZXT H1

LAPTOP: Apple MacBook Pro i7, 16gb ram, 256gb ssd. (2018 model) 

CAMERA: Panasonic Lumix G85

PHONE: iPhone 7 

DRONE: Dji Mavic Pro

Link to post
Share on other sites
1 hour ago, Jurrunio said:

What does the memory kit rated for?

I'm going to try setting the memory at 2933mhz.

Victor F. 

My hobbies include: machining, electronics, radiation, and guns

DESKTOP: CPU: Ryzen 5 3600  Motherboard: Asus ROG B550-I RAM: Corsair Vegenence DDR4-3000 SSD: Samsung 970 Pro GPU: MSI GTX1070 Ti Titanium CASE: NZXT H1

LAPTOP: Apple MacBook Pro i7, 16gb ram, 256gb ssd. (2018 model) 

CAMERA: Panasonic Lumix G85

PHONE: iPhone 7 

DRONE: Dji Mavic Pro

Link to post
Share on other sites

Alright so it seems my cpu clock was unstable, the voltage was to low. I scaled it back to 4.2ghz and 1.293v. I stress tested both small FFTs and large FFTs. Max mobo temp is 55C and max cpu temp is 72C. Time to load up siege and give a try.

Victor F. 

My hobbies include: machining, electronics, radiation, and guns

DESKTOP: CPU: Ryzen 5 3600  Motherboard: Asus ROG B550-I RAM: Corsair Vegenence DDR4-3000 SSD: Samsung 970 Pro GPU: MSI GTX1070 Ti Titanium CASE: NZXT H1

LAPTOP: Apple MacBook Pro i7, 16gb ram, 256gb ssd. (2018 model) 

CAMERA: Panasonic Lumix G85

PHONE: iPhone 7 

DRONE: Dji Mavic Pro

Link to post
Share on other sites
2 hours ago, Jurrunio said:

What does the memory kit rated for?

So after getting it stable, siege crashed when i joined at match. I dropped the clock to 4.1ghz at 1.28v and it ran fine.

Victor F. 

My hobbies include: machining, electronics, radiation, and guns

DESKTOP: CPU: Ryzen 5 3600  Motherboard: Asus ROG B550-I RAM: Corsair Vegenence DDR4-3000 SSD: Samsung 970 Pro GPU: MSI GTX1070 Ti Titanium CASE: NZXT H1

LAPTOP: Apple MacBook Pro i7, 16gb ram, 256gb ssd. (2018 model) 

CAMERA: Panasonic Lumix G85

PHONE: iPhone 7 

DRONE: Dji Mavic Pro

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×