Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

I have a ryzen 5 3600x running with stock coolers on stock settings, but after a few minutes of running at 80-90% it gets temps around 90°-95°. When I had just got the CPU I ran benchmarks to check how much the difference was to the old ones, and the temps went up to 95°+ and the computer shut down. Do i have to buy a new cooler, or is it just enough to reapply the termal paste?

 

ok.png.9fdab1ae11a7f1f923a2b1f562f5d0b1.png

 

 

Link to post
Share on other sites

Are you sure that the cooler is tightly secured, enough thermal paste? As the stock ryzen should cool adequately for a non oc stock 3600

 

MSI B450 Pro Gaming Pro Carbon AC | AMD Ryzen 2700x  | NZXT  Kraken X52  MSI GeForce RTX2070 Armour | Corsair Vengeance LPX 16GB 3200MhZ | Samsung 970 evo M.2nvme 500GB Boot  / Samsung 860 evo 500GB SSD | Corsair RM550X (2018) | Fractal Design Meshify C white | Logitech G pro WirelessGigabyte Aurus AD27QD 

Link to post
Share on other sites

The stock cooler should be fine, especially if you are not overclocking. Make sure you are using enough thermal paste and that you have enough mounting pressure.

Link to post
Share on other sites
10 minutes ago, gurannsan said:

How do i check the mounting pressure?

 

You can’t really check it, just make sure you tightened the screws for the cooler tight enough.

Link to post
Share on other sites

i know its the stock cooler but nuctua says .5nm or 4 ish inch lbs 

what i do is use a screw driver and tighten it till it is tight/ wont turn easy and give it a quater turn

Link to post
Share on other sites

downloa ryzen master and manually set your voltage to 1.35-1.38

QUOTE ME  FOR ANSWER.

 

Main PC:

Spoiler

|Ryzen 7 3700x, OC to 4.2ghz @1.3V, 67C, or 4.4ghz @1.456V, 87C || Asus strix 5700 XT, +50 core, +50 memory, +50 power (not a great overclocker) || Asus Strix b550-A || G.skill trident Z Neo rgb 32gb 3600mhz cl16-19-19-19-39, oc to 3733mhz with the same timings || Cooler Master ml360 RGB AIO || Phanteks P500A Digital || Thermaltake ToughPower grand RGB750w 80+gold || Samsung 850 250gb and Adata SX 6000 Lite 500gb || Toshiba 5400rpm 1tb || Asus Rog Theta 7.1 || Asus Rog claymore || Asus Gladius 2 origin gaming mouse || Monitor 1 Asus 1080p 144hz || Monitor 2 AOC 1080p 75hz || 

Test Rig.

Spoiler

Ryzen 5 3400G || Gigabyte b450 S2H || Hyper X fury 2x4gb 2666mhz cl 16 ||Stock cooler || Antec NX100 || Silverstone essential 400w || Transgend SSD 220s 480gb ||

Just Sold

Spoiler

| i3 9100F || Msi Gaming X gtx 1050 TI || MSI Z390 A-Pro || Kingston 1x16gb 2400mhz cl17 || Stock cooler || Kolink Horizon RGB || Corsair CV 550w || Pny CS900 120gb ||

 

Tier lists for building a PC.

 

Motherboard tier list. Tier A for overclocking 5950x. Tier B for overclocking 5900x, Tier C for overclocking 5800X. Tier D for overclocking 5600X. Tier F for 4/6 core Cpus at stock. Tier E avoid.

(Also case airflow matter or if you are using Downcraft air cooler)

Spoiler

 

Gpu tier list. Rtx 3000 and RX 6000 not included since not so many reviews. Tier S for Water cooling. Tier A and B for overcloking. Tier C stock and Tier D avoid.

( You can overclock Tier C just fine, but it can get very loud, that is why it is not recommended for overclocking, same with tier D)

Spoiler

 

Psu tier List. Tier A for Rtx 3000, Vega and RX 6000. Tier B For anything else. Tier C cheap/IGPU. Tier D and E avoid.

(RTX 3000/ RX 6000 Might run just fine with higher wattage tier B unit, Rtx 3070 runs fine with tier B units)

Spoiler

 

Cpu cooler tier list. Tier 1&2 for power hungry Cpus with Overclock. Tier 3&4 for overclocking Ryzen 3,5,7 or lower power Intel Cpus. Tier 5 for overclocking low end Cpus or 4/6 core Ryzen. Tier 6&7 for stock. Tier 8&9 Ryzen stock cooler performance. Do not waste your money!

Spoiler

 

Storage tier List. Tier A for Moving files/  OS. Tier B for OS/Games. Tier C for games. Tier D budget Pcs. Tier E if on sale not the worst but not good.

(With a grain of salt, I use tier C for OS myself)

Spoiler

 

Case Tier List. Work In Progress. Most Phanteks airflow series cases already done!

Ask me anything :)

Link to post
Share on other sites
Just now, SavageNeo said:

downloa ryzen master and manually set your voltage to 1.35-1.38

Will this lower performance?

Link to post
Share on other sites
2 minutes ago, gurannsan said:

Will this lower performance?

no, but gen3 ryzen often has too high voltage. Lower voltage= less heat.

You can also set your cores to 4-4.4ghz. This makes your cpu run at those clocks all the time.

QUOTE ME  FOR ANSWER.

 

Main PC:

Spoiler

|Ryzen 7 3700x, OC to 4.2ghz @1.3V, 67C, or 4.4ghz @1.456V, 87C || Asus strix 5700 XT, +50 core, +50 memory, +50 power (not a great overclocker) || Asus Strix b550-A || G.skill trident Z Neo rgb 32gb 3600mhz cl16-19-19-19-39, oc to 3733mhz with the same timings || Cooler Master ml360 RGB AIO || Phanteks P500A Digital || Thermaltake ToughPower grand RGB750w 80+gold || Samsung 850 250gb and Adata SX 6000 Lite 500gb || Toshiba 5400rpm 1tb || Asus Rog Theta 7.1 || Asus Rog claymore || Asus Gladius 2 origin gaming mouse || Monitor 1 Asus 1080p 144hz || Monitor 2 AOC 1080p 75hz || 

Test Rig.

Spoiler

Ryzen 5 3400G || Gigabyte b450 S2H || Hyper X fury 2x4gb 2666mhz cl 16 ||Stock cooler || Antec NX100 || Silverstone essential 400w || Transgend SSD 220s 480gb ||

Just Sold

Spoiler

| i3 9100F || Msi Gaming X gtx 1050 TI || MSI Z390 A-Pro || Kingston 1x16gb 2400mhz cl17 || Stock cooler || Kolink Horizon RGB || Corsair CV 550w || Pny CS900 120gb ||

 

Tier lists for building a PC.

 

Motherboard tier list. Tier A for overclocking 5950x. Tier B for overclocking 5900x, Tier C for overclocking 5800X. Tier D for overclocking 5600X. Tier F for 4/6 core Cpus at stock. Tier E avoid.

(Also case airflow matter or if you are using Downcraft air cooler)

Spoiler

 

Gpu tier list. Rtx 3000 and RX 6000 not included since not so many reviews. Tier S for Water cooling. Tier A and B for overcloking. Tier C stock and Tier D avoid.

( You can overclock Tier C just fine, but it can get very loud, that is why it is not recommended for overclocking, same with tier D)

Spoiler

 

Psu tier List. Tier A for Rtx 3000, Vega and RX 6000. Tier B For anything else. Tier C cheap/IGPU. Tier D and E avoid.

(RTX 3000/ RX 6000 Might run just fine with higher wattage tier B unit, Rtx 3070 runs fine with tier B units)

Spoiler

 

Cpu cooler tier list. Tier 1&2 for power hungry Cpus with Overclock. Tier 3&4 for overclocking Ryzen 3,5,7 or lower power Intel Cpus. Tier 5 for overclocking low end Cpus or 4/6 core Ryzen. Tier 6&7 for stock. Tier 8&9 Ryzen stock cooler performance. Do not waste your money!

Spoiler

 

Storage tier List. Tier A for Moving files/  OS. Tier B for OS/Games. Tier C for games. Tier D budget Pcs. Tier E if on sale not the worst but not good.

(With a grain of salt, I use tier C for OS myself)

Spoiler

 

Case Tier List. Work In Progress. Most Phanteks airflow series cases already done!

Ask me anything :)

Link to post
Share on other sites

How good airflow you have (intake fans? outtake fans?) because your gpu is 72c wiht only 4% load?

QUOTE ME  FOR ANSWER.

 

Main PC:

Spoiler

|Ryzen 7 3700x, OC to 4.2ghz @1.3V, 67C, or 4.4ghz @1.456V, 87C || Asus strix 5700 XT, +50 core, +50 memory, +50 power (not a great overclocker) || Asus Strix b550-A || G.skill trident Z Neo rgb 32gb 3600mhz cl16-19-19-19-39, oc to 3733mhz with the same timings || Cooler Master ml360 RGB AIO || Phanteks P500A Digital || Thermaltake ToughPower grand RGB750w 80+gold || Samsung 850 250gb and Adata SX 6000 Lite 500gb || Toshiba 5400rpm 1tb || Asus Rog Theta 7.1 || Asus Rog claymore || Asus Gladius 2 origin gaming mouse || Monitor 1 Asus 1080p 144hz || Monitor 2 AOC 1080p 75hz || 

Test Rig.

Spoiler

Ryzen 5 3400G || Gigabyte b450 S2H || Hyper X fury 2x4gb 2666mhz cl 16 ||Stock cooler || Antec NX100 || Silverstone essential 400w || Transgend SSD 220s 480gb ||

Just Sold

Spoiler

| i3 9100F || Msi Gaming X gtx 1050 TI || MSI Z390 A-Pro || Kingston 1x16gb 2400mhz cl17 || Stock cooler || Kolink Horizon RGB || Corsair CV 550w || Pny CS900 120gb ||

 

Tier lists for building a PC.

 

Motherboard tier list. Tier A for overclocking 5950x. Tier B for overclocking 5900x, Tier C for overclocking 5800X. Tier D for overclocking 5600X. Tier F for 4/6 core Cpus at stock. Tier E avoid.

(Also case airflow matter or if you are using Downcraft air cooler)

Spoiler

 

Gpu tier list. Rtx 3000 and RX 6000 not included since not so many reviews. Tier S for Water cooling. Tier A and B for overcloking. Tier C stock and Tier D avoid.

( You can overclock Tier C just fine, but it can get very loud, that is why it is not recommended for overclocking, same with tier D)

Spoiler

 

Psu tier List. Tier A for Rtx 3000, Vega and RX 6000. Tier B For anything else. Tier C cheap/IGPU. Tier D and E avoid.

(RTX 3000/ RX 6000 Might run just fine with higher wattage tier B unit, Rtx 3070 runs fine with tier B units)

Spoiler

 

Cpu cooler tier list. Tier 1&2 for power hungry Cpus with Overclock. Tier 3&4 for overclocking Ryzen 3,5,7 or lower power Intel Cpus. Tier 5 for overclocking low end Cpus or 4/6 core Ryzen. Tier 6&7 for stock. Tier 8&9 Ryzen stock cooler performance. Do not waste your money!

Spoiler

 

Storage tier List. Tier A for Moving files/  OS. Tier B for OS/Games. Tier C for games. Tier D budget Pcs. Tier E if on sale not the worst but not good.

(With a grain of salt, I use tier C for OS myself)

Spoiler

 

Case Tier List. Work In Progress. Most Phanteks airflow series cases already done!

Ask me anything :)

Link to post
Share on other sites

I have one intake and one outake fan. I think the gpu is high because im running FAH and it's using the gpu. Temps went up as soon is i launched it but there were no signs of usage. I'm guessing this is just flaws in the software or something.

Link to post
Share on other sites

The mode on ryzen master was manual so i thought i light have messed with some settings there so I set it on default settings but then after a restart without doing anything it went to like 80 degrees and powered off. Now I can’t boot at all without a crash. Is there any way to change the voltage in bios?

 

Edit: I can boot now at 50-60 degrees. Guess it was just overheated to start with. At idle it lies at 50 boost up to 55-60 and slowley goes down to 50 btw. It has done this since i got it, as well as getting the high temps. It is now locked at 1.01 volts too, but it seems like the temps are still the same. I will try to reapply the termal paste, and if that doesnt work I'll just buy a new cooler or something.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×