New i9-9900k Build problems with BSOD

[Bogdan95]

Hello, so I recently made a build using the following parts:

i9-9900k
Gigabyte aorus h370 gaming 3 wifi
GeForce® GTX 1660 SUPER
Kingston HyperX FURY Black, 32GB, DDR4-2666MHz, CL16, Dual Channel
SSD Samsung 970 EVO Plus Series, 500GB, PCI Express x4, M.2
Hard Disk Seagate BarraCuda 2TB, SATA3, 256MB, 3.5inch
Corsair TX Series TX850M, 850W
Deepcool gamer storm assassin II, with 120mm and 140mm fans

The temperature of the pc have never gone over 70C. 


On the motherbord I am using the latest bios, wich is F13. So I don't do any overclocking, the settings are normal, I didn't enable the xmp for the ram, but my problem is I'm getting random Blue screens. Some of them are: PAGE FAUL IN NONPAGED AREA, DRIVER_IRQL_NOT_LESS_OR_EQUAL. Also I get errors from Fortnite and Diablo 3, it crushes every time I have 32gb ram, when I only have 1 stick in the pc, everything works great.

All those blue screens comes from ram, as when I left just one stick of ram, I had no problems.
So I run Memory Check everything is good, the thing is this happens only when I have 2 sticks of ram in the pc, when I leave just one of them, everything works great.  Any suggestions what should I do? Everything is brand new, 1 week. I tested both ram sticks, one by one, they are good. The pc runs great with either of them.. but not with both of them togheter. 
I have the sam ram sticks. from the same brand, same speeds.

[boggy77]

15 minutes ago, Bogdan95 said:

I have the sam ram sticks. from the same brand, same speeds.

In which slots on the motherboard did you put the ram sticks?

[Noah0302]

Seems like one of your RAM modules is not working 100%.

 

If you can narrow it down which one exactly, maybe try replacing it with a different one and see if it works without crashing.

If that works, then RMA the defect kit, if you still can.

[Bogdan95]

3 minutes ago, boggy77 said:

In which slots on the motherboard did you put the ram sticks?

I have them in slto 1 and 2, this is the picture of the slots on the motherboard:

[BuckyBallin]

with most boards you want them in 2 and 4 for dual channel, is this pic from the manual for your board?

[Bogdan95]

4 minutes ago, Noah0302 said:

Seems like one of your RAM modules is not working 100%.

 

If you can narrow it down which one exactly, maybe try replacing it with a different one and see if it works without crashing.

If that works, then RMA the defect kit, if you still can.

I will try to do that, as I have 2 pc's with the same specs, one for me and one for my brother (gift for new house) but he didn't have the time yet to configure his pc, so I will go ahead and install windows and everything on his pc also, if he have the same problems, than could be a motherboard issue... or don't know..

[Bogdan95]

Just now, BuckyBallin said:

with most boards you want them in 2 and 4 for dual channel, is this pic from the manual for your board?

Yes, I can give you the link of the manaul.

https://download.gigabyte.com/FileList/Manual/mb_manual_h370-aorus-gaming-3wifi_1001_180628_e.pdf

[boggy77]

2 minutes ago, Bogdan95 said:

I have them in slto 1 and 2, this is the picture of the slots on the motherboard:

 

1 minute ago, BuckyBallin said:

with most boards you want them in 2 and 4 for dual channel

check your motherboard manual, but as Bucky says, it's usually 2 and 4, or sometimes 1 and 3. that should solve your problem.

[Bogdan95]

Just now, boggy77 said:

 

check your motherboard manual, but as Bucky says, it's usually 2 and 4, or sometimes 1 and 3. that should solve your problem.

I will do that today, and I will come back. If that is the case, it will be great 

[boggy77]

1 minute ago, Bogdan95 said:

Yes, I can give you the link of the manaul.

https://download.gigabyte.com/FileList/Manual/mb_manual_h370-aorus-gaming-3wifi_1001_180628_e.pdf

yep, put them in slots 2 and 4

[Bogdan95]

2 minutes ago, boggy77 said:

yep, put them in slots 2 and 4

THis is what I found in the manual:

 

 

[Bogdan95]

Just now, Bogdan95 said:

THis is what I found in the manual:

 

 

So the guy who installed my memory, inserted them in 1 and 2, but I can see that the channel A is DDR4_2 and DDR4_4 or DDR4_1 and DDR4_3... so that could be my problem...

[boggy77]

1 minute ago, Bogdan95 said:

So the guy who installed my memory, inserted them in 1 and 2, but I can see that the channel A is DDR4_2 and DDR4_4 or DDR4_1 and DDR4_3... so that could be my problem...

yeah so he installed in slots 1 and 2 instead of DDR4_1 and DDR4_2. So yeah, go for slots 2 and 4 (DDR4_2 adn DDR4_1).

[Bogdan95]

So, made the change.. same problems. With 2 sticks bsod.. Remove one of the ram sticks.. no peoblem..

[Bogdan95]

I think I found the bad memory stick... got a bsod when tested the single stick. I will go ahead and send them back to the store and get other brand..

[MrBrightSyde]

It doesn't matter what brand you get, they all have a couple of failures. Had the same problem with my Corsair Vengeance LPX 3000mhz CL15 (just pointing out the exact model). One wasn't working, so I got it replaced with the same model and no problems at all.

 

[Bogdan95]

14 hours ago, MrBrightSyde said:

It doesn't matter what brand you get, they all have a couple of failures. Had the same problem with my Corsair Vengeance LPX 3000mhz CL15 (just pointing out the exact model). One wasn't working, so I got it replaced with the same model and no problems at all.

 

Today I will go to configure my brother pc, which have the same specs, if he have the same problems, that means could be related to GPU or MOTHERBOARD.. I will come back with an update.

[Bogdan95]

So I decided to run a Memtest. Look at all this errors... 

[SavageNeo]

1 hour ago, Bogdan95 said:

So I decided to run a Memtest. Look at all this errors... 

Rma the ram stick and take exact same model

[Bogdan95]

Fixed the problem, it seems it was a bad motherboard...