Trouble posting at 3200mhz

[Wolfy97]

Hello guys,

 

(this is my 1st post here so don't roast me too much). I have made for my brother his 1st gaming pc and i have problems with it and i don't know how to solve after going wide in the internet for this.

 

I have made him a PC with the next components:

mobo: b450m DS3H from gigabyte 

cpu: ryzen 2600

ram: patriot viper at 3200mhz 

gpu (atm is my 1080 in it since i am on a budget and i need my paycheck to buy him smth else) 

PSU: 600W 80+ bronze from thermaltake Smart BM1

 

The problem: when i activate the XMP profile on the ram and save and exit from bios the PC wont post and the speaker makes 3 beeps pause 3 beeps and then it keeps rebooting. The only way i can fix this is shutting the computer down and then PSU for about 2 minutes. Is there any way to fix this or is the ram bad? i am on bios version F41,

 

Thank you!

[TheBean]

does it work if you set the ram at 3000mhz? what about 2666?

[Juular]

You shouldn't have updated to this BIOS version, it's Zen 2 compatible, it wasn't tested with Zen\Zen+ CPUs so it may work erratic ...

[Wolfy97]

I got this bios out of the box i did not change it :( can i reverse it?

[Wolfy97]

14 minutes ago, Saksham said:

does it work if you set the ram at 3000mhz? what about 2666?

I can't change to this speed in bios i tried but there was no option to manual change it. Is there a setting i need to activate outside of advanced memory settings?

[Wolfy97]

14 minutes ago, Juular said:

You shouldn't have updated to this BIOS version, it's Zen 2 compatible, it wasn't tested with Zen\Zen+ CPUs so it may work erratic ...

I got this bios out of the box i did not change it can i reverse it?

[Juular]

5 minutes ago, Wolfy97 said:

I got this bios out of the box i did not change it can i reverse it?

Reset to factory\optimal defaults.

[Wolfy97]

12 minutes ago, Juular said:

Reset to factory\optimal defaults.

i am going to try it now i hope it works!

Edit: i dont know how

[Wolfy97]

On 12/2/2019 at 9:42 PM, Wolfy97 said:

Hello guys,

 

(this is my 1st post here so don't roast me too much). I have made for my brother his 1st gaming pc and i have problems with it and i don't know how to solve after going wide in the internet for this.

 

I have made him a PC with the next components:

mobo: b450m DS3H from gigabyte 

cpu: ryzen 2600

ram: patriot viper at 3200mhz 

gpu (atm is my 1080 in it since i am on a budget and i need my paycheck to buy him smth else) 

PSU: 600W 80+ bronze from thermaltake Smart BM1

 

The problem: when i activate the XMP profile on the ram and save and exit from bios the PC wont post and the speaker makes 3 beeps pause 3 beeps and then it keeps rebooting. The only way i can fix this is shutting the computer down and then PSU for about 2 minutes. Is there any way to fix this or is the ram bad? i am on bios version F41,

 

Thank you!

Oh i used precision driver and i managed to get them to run at 2666 i think i could run them at higher speed but i need to change the socket and i mounted the cooler "bad" and i can't so thats that. Anyway thank you to the persons that try to help me