Jump to content

Help, my mouse Is slower and starting to show some input lag, noticeable but not that big.

AdamWrld
By AdamWrld
in Troubleshooting
 Share
Posted

so yeah, my mouse isn't as fast, it's like its got some sort of smoothing, it's no longer as responsive as It should be, I tried higher dpi but It still was a problem, I tried everything like putting the enchant thing in the mouse settings and that didn't work so I turned It off again, honestly idk what to do, I had big input lag on my old pc and I'm not a week into my new pc and I'm starting to get the same feel to my PC.

Specs:

 

i5 6500

gtx 1060 6gb

8gb ddr4

 

If you guys want anymore information please tell me.

Link to post
Share on other sites
Posted

what is the mouse and how old is it?

Im with the mentaility of "IF IM NOT SURE IF ITS ENOUGH COOLING, GO OVERKILL"

 

CURRENT PC SPECS    

CPU             : Ryzen 5 3600 (Formerly Ryzen 3 1200)

GPU             : ASUS RX 580 Dual OC (Formerly ASUS GTX 1060 but it got corroded for some odd reasons)

GPU COOOER      : ID Cooling Frostflow 120 VGA (Stock cooler overheats even when undervolted :()

MOBO            : MSI B350m Bazooka

MEMORY          : Team Group Elite TUF DDR4 3600 Mhz CL 16
STORAGE         : Seagate Baracudda 1TB and Kingston SSD
PSU             : Thermaltake Lite power 550W (Gonna change soon as i dont trust this)
CASE            : Rakk Anyag Frost
CPU COOLER      : ID-Cooling SE 207
CASE FANS       : Mix of ID cooling fans, Corsair fans and Rakk Ounos (planned change to ID Cooling)
DISPLAY         : SpectrePro XTNS24 144hz Curved VA panel
MOUSE           : Logitech G603 Lightspeed
KEYBOARD        : Rakk Lam Ang

HEADSET         : Plantronics RIG 500HD

Kingston Hyper X Stinger

 

and a whole lot of LED everywhere(behind the monitor, behind the desk, behind the shelf of the PC mount and inside the case)

Link to post
Share on other sites
Posted
15 hours ago, AdamWrld said:

It's a steelseries rival 110, got it for a about 1-2 weeks now, i tried it on another PC and It works fine.

is there a software for that mouse in the PC? if there is , try to uninstall and reinstall it.. if not check the mouse DPI in the mouse setting.

Im with the mentaility of "IF IM NOT SURE IF ITS ENOUGH COOLING, GO OVERKILL"

 

CURRENT PC SPECS    

CPU             : Ryzen 5 3600 (Formerly Ryzen 3 1200)

GPU             : ASUS RX 580 Dual OC (Formerly ASUS GTX 1060 but it got corroded for some odd reasons)

GPU COOOER      : ID Cooling Frostflow 120 VGA (Stock cooler overheats even when undervolted :()

MOBO            : MSI B350m Bazooka

MEMORY          : Team Group Elite TUF DDR4 3600 Mhz CL 16
STORAGE         : Seagate Baracudda 1TB and Kingston SSD
PSU             : Thermaltake Lite power 550W (Gonna change soon as i dont trust this)
CASE            : Rakk Anyag Frost
CPU COOLER      : ID-Cooling SE 207
CASE FANS       : Mix of ID cooling fans, Corsair fans and Rakk Ounos (planned change to ID Cooling)
DISPLAY         : SpectrePro XTNS24 144hz Curved VA panel
MOUSE           : Logitech G603 Lightspeed
KEYBOARD        : Rakk Lam Ang

HEADSET         : Plantronics RIG 500HD

Kingston Hyper X Stinger

 

and a whole lot of LED everywhere(behind the monitor, behind the desk, behind the shelf of the PC mount and inside the case)

Link to post
Share on other sites
Posted
  • Author
4 minutes ago, Martin2132 said:

is there a software for that mouse in the PC? if there is , try to uninstall and reinstall it.. if not check the mouse DPI in the mouse setting.

Okay just uninstalled and reinstalled It, dpi setting IS 800 on both settings. Also before this happened, my cpu fan cooler wasn't connected for about 5 days, but I never smelt burning or anything and I only used It for watching and stuff. Btw after reinstalling, I still the same.

 

Link to post
Share on other sites
Posted
  • Author
4 minutes ago, Martin2132 said:

is there a software for that mouse in the PC? if there is , try to uninstall and reinstall it.. if not check the mouse DPI in the mouse setting.

Also I had this problem before and It was fixed by a update, i updated everything and It's the same, and before like when I first got my PC my mouse was fine until like a few hours of playing It would be like how It Is right now.

Link to post
Share on other sites
Posted

isnt 800 too low? ( #ImLockedAt6400DPIBecauseLowerThanThatIsTooSlow )

 

so it might have been software related since you said that it works on the other pc. have you tried it in another usb slot?

Im with the mentaility of "IF IM NOT SURE IF ITS ENOUGH COOLING, GO OVERKILL"

 

CURRENT PC SPECS    

CPU             : Ryzen 5 3600 (Formerly Ryzen 3 1200)

GPU             : ASUS RX 580 Dual OC (Formerly ASUS GTX 1060 but it got corroded for some odd reasons)

GPU COOOER      : ID Cooling Frostflow 120 VGA (Stock cooler overheats even when undervolted :()

MOBO            : MSI B350m Bazooka

MEMORY          : Team Group Elite TUF DDR4 3600 Mhz CL 16
STORAGE         : Seagate Baracudda 1TB and Kingston SSD
PSU             : Thermaltake Lite power 550W (Gonna change soon as i dont trust this)
CASE            : Rakk Anyag Frost
CPU COOLER      : ID-Cooling SE 207
CASE FANS       : Mix of ID cooling fans, Corsair fans and Rakk Ounos (planned change to ID Cooling)
DISPLAY         : SpectrePro XTNS24 144hz Curved VA panel
MOUSE           : Logitech G603 Lightspeed
KEYBOARD        : Rakk Lam Ang

HEADSET         : Plantronics RIG 500HD

Kingston Hyper X Stinger

 

and a whole lot of LED everywhere(behind the monitor, behind the desk, behind the shelf of the PC mount and inside the case)

Link to post
Share on other sites
Posted
  • Author
1 minute ago, Martin2132 said:

isnt 800 too low? ( #ImLockedAt6400DPIBecauseLowerThanThatIsTooSlow )

 

so it might have been software related since you said that it works on the other pc. have you tried it in another usb slot?

I have tried all usb slots, and I'm just saying that this wasn't a problem when I had the PC at the start and that had the software installed and 800 dpi is perfectly fine and Its how i play and I play fast with it.

Link to post
Share on other sites
Posted

at this point, it might have just been a software thing but im not sure which one. have you checked the USB headers inside the PC if they are connected properly? thats a bit of a stretch if its the problem but check , just in case. other than that, i dont know what is wrong.

Im with the mentaility of "IF IM NOT SURE IF ITS ENOUGH COOLING, GO OVERKILL"

 

CURRENT PC SPECS    

CPU             : Ryzen 5 3600 (Formerly Ryzen 3 1200)

GPU             : ASUS RX 580 Dual OC (Formerly ASUS GTX 1060 but it got corroded for some odd reasons)

GPU COOOER      : ID Cooling Frostflow 120 VGA (Stock cooler overheats even when undervolted :()

MOBO            : MSI B350m Bazooka

MEMORY          : Team Group Elite TUF DDR4 3600 Mhz CL 16
STORAGE         : Seagate Baracudda 1TB and Kingston SSD
PSU             : Thermaltake Lite power 550W (Gonna change soon as i dont trust this)
CASE            : Rakk Anyag Frost
CPU COOLER      : ID-Cooling SE 207
CASE FANS       : Mix of ID cooling fans, Corsair fans and Rakk Ounos (planned change to ID Cooling)
DISPLAY         : SpectrePro XTNS24 144hz Curved VA panel
MOUSE           : Logitech G603 Lightspeed
KEYBOARD        : Rakk Lam Ang

HEADSET         : Plantronics RIG 500HD

Kingston Hyper X Stinger

 

and a whole lot of LED everywhere(behind the monitor, behind the desk, behind the shelf of the PC mount and inside the case)

Link to post
Share on other sites
Posted
  • Author
1 minute ago, Martin2132 said:

at this point, it might have just been a software thing but im not sure which one. have you checked the USB headers inside the PC if they are connected properly? thats a bit of a stretch if its the problem but check , just in case. other than that, i dont know what is wrong.

I went through my pc and connected everything again, everything Is connected.

Link to post
Share on other sites
Posted

are we using thermal paste? sounds like the cpu is throttling cos the user doesn't know how to maintain a pc.

Insert ram related question here: https://linustechtips.com/main/topic/1197132-setting-ram-speed-xmp-docp-for-dummies/

Link to post
Share on other sites
Posted
8 minutes ago, AdamWrld said:

I am using thermal paste.

can you monitor cpu temps?

Insert ram related question here: https://linustechtips.com/main/topic/1197132-setting-ram-speed-xmp-docp-for-dummies/

Link to post
Share on other sites
Posted
  • Author
1 minute ago, TrigrH said:

can you monitor cpu temps?

Yes, I didn't actually know that my cpu fan was off for a few days so thats maybe why It happened, but I can run some temps rn.

Link to post
Share on other sites
Posted
Just now, AdamWrld said:

Yes, I didn't actually know that my cpu fan was off for a few days so thats maybe why It happened, but I can run some temps rn.

please do

Insert ram related question here: https://linustechtips.com/main/topic/1197132-setting-ram-speed-xmp-docp-for-dummies/

Link to post
Share on other sites
Posted
2 minutes ago, AdamWrld said:

probably without the fan the cpu would be at 50 or something since my pc Is pretty chilled and It's winter rn.

have you tried another mouse?

Insert ram related question here: https://linustechtips.com/main/topic/1197132-setting-ram-speed-xmp-docp-for-dummies/

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×