Mini itx build with gpu and capture cards

[Billybonka]

Hi everybody,

 

Does anybody know how i could create this build? Most mini itx motherboards have only one PCIE connection but this build they use extra pcie capture cards cards. Do they use m.2 to pcie? Does anybody has any idea any help would be very much appreciated. Thank you in advanced

 

 

 

[DoctorNick]

Link plx

[Uptivuptiz]

They probably use a PCIe 3.0 16x riser that splits into 2 PCIe 3.0 8x slots.

[mariushm]

Are you sure it's not some USB 3 capture card connected into a usb 3.0 header?

 

Also, you can buy  pci-e switch things ... you insert it in a pci-e x8 or x16 and it takes the 8-16 lanes and creates multiple slots.

 

The cheapest are pci-e x1 to 2..4 x1 slots  ex: https://www.amazon.com/Cablecc-Express-Switch-Multiplier-Splitter/dp/B073QNW3L9/ref=sr_1_1?keywords=pericom+pci-e+x1&qid=1574424435&sr=8-1

 

[Billybonka]

3 hours ago, Uptivuptiz said:

They probably use a PCIe 3.0 16x riser that splits into 2 PCIe 3.0 8x slots.

Ok but they have a graphics card in it aswell so that will be using the only pcie 16 slot available but nice to hear your opinion thank you! 

 

24 minutes ago, mariushm said:

Are you sure it's not some USB 3 capture card connected into a usb 3.0 header?

 

Also, you can buy  pci-e switch things ... you insert it in a pci-e x8 or x16 and it takes the 8-16 lanes and creates multiple slots.

 

The cheapest are pci-e x1 to 2..4 x1 slots  ex: https://www.amazon.com/Cablecc-Express-Switch-Multiplier-Splitter/dp/B073QNW3L9/ref=sr_1_1?keywords=pericom+pci-e+x1&qid=1574424435&sr=8-1

 

USB 3 is impossible 4 channel capture cards don't exist on usb yet but thank you for your thoughts.

 

3 hours ago, DoctorNick said:

Link plx

http://www.switchbladesystems.com/M7.html

[For Science!]

2 hours ago, Billybonka said:

 

This is called PCIe bifurcation, I think mostly Asrock boards support it.