Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

Building pc but nothing shows up on the screen.

Hi,

I´m building my second pc and I ran into a problem. I set up everything as usually cpu in cooler in rams in gpu in ssd plugged in and all cables. Then boot up, lights light up, fans start nicely but screen doesnt detect signal. I have tried 2 sreens many cables different ports, nothing.

I ran out of ideas on why it won't work.

Any ideas how to fix?

Specs:

CPU: AMD ryzen 5 3600

GPU: Nvidia gtx 1660 

Mobo: MSI MPG x570 gaming plus

PSU: Corsair RM650

RAM: Kingston hyperX fury DDR4 2666 MHz 16Gt

 

Link to post
Share on other sites

does the motherboard beep? it's also good if you reset the bios.

Ryzen 3600 @ 4.5ghz all cores | Asrock B550M Steel Legend | Radeon RX580 | 2x Samsung 16gb c-die 2666 @ 3600mhz cl16 | 500gb WD SN750 | 9 TB HDD | Deepcool Gammax 400 w/ 2 delta 4000rpm push pull | Antec Neo Eco Zen 500w

Link to post
Share on other sites

No motherboard doesn't beep, haven´t reset bios yet

 

Also noticed there was sub for troubleshooting so further replies there. :D

Thank you!

Link to post
Share on other sites

Since your motherboard have a diagnostic LED, look here:

Image result for EZ Debug LEDs

Image result for EZ Debug LEDs

Ryzen 3600 @ 4.5ghz all cores | Asrock B550M Steel Legend | Radeon RX580 | 2x Samsung 16gb c-die 2666 @ 3600mhz cl16 | 500gb WD SN750 | 9 TB HDD | Deepcool Gammax 400 w/ 2 delta 4000rpm push pull | Antec Neo Eco Zen 500w

Link to post
Share on other sites
5 minutes ago, PojanPullero said:

Hi,

I´m building my second pc and I ran into a problem. I set up everything as usually cpu in cooler in rams in gpu in ssd plugged in and all cables. Then boot up, lights light up, fans start nicely but screen doesnt detect signal. I have tried 2 sreens many cables different ports, nothing.

I ran out of ideas on why it won't work.

Any ideas how to fix?

Specs:

CPU: AMD ryzen 5 3600

GPU: Nvidia gtx 1660 

Mobo: MSI MPG x570 gaming plus

PSU: Corsair RM650

RAM: Kingston hyperX fury DDR4 2666 MHz 16Gt

Try reseating the gpu.

What are these for?

Link to post
Share on other sites

I´ll check when I get home, I´m in school rn

yeah I have done that few times and also tried other working gpu

Link to post
Share on other sites

busted pcie slot? or  board bios update needed

Some EU input to Canadian IT :D 

Link to post
Share on other sites

Make sure that everything is plugged in tight. Or look at the post code on the motherboard to see if it´s a bad post code. Look the code up on google to see what it is.

Link to post
Share on other sites

The light to dram lights up i went and got new rams exact same and still not working tried every slot

is it mobos ram slots that are broken now?

 

I have tried all pcie slots and now I found out that my mobo has lights to indicate what is broken thanks to SupaKomputa so the light to dram lights up and light to cpu flashes when I start the computer. I went and got new ram, tried it on every slot and still light is on.

I guess it might be my mobo what is broken?

Link to post
Share on other sites

Be really sure you have all the slots tight, not just pcie. Power cable to the MB, connector to the cpu fan and so on. I know everybody is telling you this but a loose cable is the problem 90% of the time. Otherwise, could be the MB it self.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×