Done goofed with my radiators

[anti gravity]

In my defense i can say that this is my first time water cooling tho not a excuse.

The problem is simple - going for a dual 360 rad setup in LianLi o11 dynamic and they dont fit as in i top and side (cant put them in the bottom part because vertical gpu) 

if u have any ideas on how i could mount themim open to ideas

i had a thought of mounting the fans in the back side and the rad on the front but thats not really aesthetically pleasing but so far that seams like the only option

radiator specs  400 x 130 x 38mm (L x W x H)

[BobVonBob]

How don't the two radiators fit? There are mounting points for three 360 radiators, and as far as I can tell you've only mentioned one location that gets blocked off.

 

 

[anti gravity]

I wouldent be making this post if the rads would fit dont u think.

When i mount the front rad i cant mount the top one do to the fact that the side rad with fans is to thick 

[For Science!]

2 minutes ago, anti gravity said:

 

Can you not put the vertical radiator in the back compartment?

[anti gravity]

6 minutes ago, For Science! said:

Can you not put the vertical radiator in the back compartment?

No i tried that 

[Fasauceome]

radiator on top minus one fan, and fans on the bottom to get some good airflow up there

Edited October 18, 2019 by Fasauceome

[anti gravity]

1 minute ago, Fasauceome said:

radiator on top minus one fan, and fans on the bottom to get some good airflow up there

was planning to mount my pump there and with 1 fan it will look kinda weird but if all else fails ill probably use ur method

[anti gravity]

I have come to the conclusion that im going to slightly mod the case found out that the clearance is just 5 mils i can drill new holes and it wont really effect the look

[Neggy-Z]

What rads are you using? An EK SE 360 slim rad will fit in the back compartment leaving just the fans in the front, this will give you enough clearance for everything.

[anti gravity]

5 hours ago, ShadyHamster said:

What rads are you using? An EK SE 360 slim rad will fit in the back compartment leaving just the fans in the front, this will give you enough clearance for everything.

I gave the specs for the rad 

tho dont remember the model 

all i can say i tried and it dident fit in the back or front so im just gonna drill some holes just need to offset the top rad by 5 mils

[fabafaba]

 

12 hours ago, anti gravity said:

No i tried that 

There's room for a 45mm thick rad in the back compartment, so as long as the in- and outlets aren't awkwardly placed you can fit a rad in there. 

 

13 hours ago, anti gravity said:

When i mount the front rad i cant mount the top one do to the fact that the side rad with fans is to thick 

If you want the radiator to be on the inside, just put the fans on the outside like I did.

[SolarNova]

16 hours ago, anti gravity said:

In my defense i can say that this is my first time water cooling tho not a excuse.

The problem is simple - going for a dual 360 rad setup in LianLi o11 dynamic and they dont fit as in i top and side (cant put them in the bottom part because vertical gpu) 

if u have any ideas on how i could mount themim open to ideas

i had a thought of mounting the fans in the back side and the rad on the front but thats not really aesthetically pleasing but so far that seams like the only option

radiator specs  400 x 130 x 38mm (L x W x H)

 

2 hours ago, fabafaba said:

 

There's room for a 45mm thick rad in the back compartment, so as long as the in- and outlets aren't awkwardly placed you can fit a rad in there. 

 

If you want the radiator to be on the inside, just put the fans on the outside like I did.

Indeed try that. I done the same with my Enthoo Primo

[anti gravity]

i tried putting my rad in the back dident work cuz its to wide 

[fabafaba]

22 minutes ago, anti gravity said:

i tried putting my rad in the back dident work cuz its to wide 

Is the radiator hitting the cables of the front IO?

[anti gravity]

5 hours ago, fabafaba said:

Is the radiator hitting the cables of the front IO?

yap

[fabafaba]

3 minutes ago, anti gravity said:

yap

Then you'll have to mount the fans on the outside and the radiator on the inside with the ports on the bottom. But also take a look at this thread on overclock.net, someone modded their O11 to fit a vertical GPU with a radiator in the bottom.

[anti gravity]

12 hours ago, fabafaba said:

Then you'll have to mount the fans on the outside and the radiator on the inside with the ports on the bottom. But also take a look at this thread on overclock.net, someone modded their O11 to fit a vertical GPU with a radiator in the bottom.

I think it would be simpler to drill 3 holes than make brackets and so on 

again i just need to drill reposition the top rad

[fabafaba]

2 minutes ago, anti gravity said:

I think it would be simpler to drill 3 holes than make brackets and so on 

again i just need to drill reposition the top rad

I think it would be simpler to do what I said first, fans on the outside and rad on the inside, that doesn't require drilling any holes