Jump to content

Wraith Prism RAM Clearance on ASUS B450 E Gaming?

BaDeyy
 Share
Posted

Hey guys,

I just wanted to know if sb has the following (or similar) configuration and knows if there's enough clearance for RAM with a height of 52mm.

Configuration:

ASUS ROG STRIX B450-E Gaming

Wraith Prism Air Cooling

RAM: 51.4mm height (Corsair Vengeance RGB)

 

Thanks for any help!

Link to post
Share on other sites
Posted

are you populating all 4 slots?

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 10 and Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

How many watts do I need? ATX 3.0 & PCIe 5.0 spec, PSU misconceptions, protections explained, group reg is bad

Link to post
Share on other sites
Posted
11 minutes ago, BaDeyy said:

Probably just 2. Maybe in future 4 but I dont think so.

The wraith prism is made to not obstruct the ram slots, you'll find quite a lot of clearance if you're only populating 2 slots, as the slot closest to the CPU will be empty. You can check out some pictures of the wraith on a motherboard with 4 dimms if you're curious.

 

Also make sure to quote us so we see your responses.

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 10 and Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

How many watts do I need? ATX 3.0 & PCIe 5.0 spec, PSU misconceptions, protections explained, group reg is bad

Link to post
Share on other sites
Posted
  • Author
5 minutes ago, Fasauceome said:

The wraith prism is made to not obstruct the ram slots, you'll find quite a lot of clearance if you're only populating 2 slots, as the slot closest to the CPU will be empty. You can check out some pictures of the wraith on a motherboard with 4 dimms if you're curious.

 

Also make sure to quote us so we see your responses.

Ok thanks for the quick answer.

I'll quote from now on. Thanks for the tip since I am new to this forum ;)

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cooling

×