Jump to content

Palit RTX 2070 SUPER Jetstream fan speed when booting.

Hemanse

Recently build my new PC and everything is working good. One thing I have noticed tho is that my Palit 2070S Jetstream runs the fans at 100% on boot and then quiet down after a few seconds, is that normal? 

 

The card runs great, just seems kinda odd that it has to deafen me every time I boot up the PC :)

Ryzen 7 3700x, MSI B450 Tomahawk MAX, 16GB Ballistix Elite 3600MHz, MSI RTX 2070 Super Gaming X Trio, Corsair RM750x V2

Link to comment
Share on other sites

Link to post
Share on other sites

Maybe...? It's possible that the card doesnt apply its fan curve immediately after boot, but why Palit do this I'm not sure.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

3 hours ago, Jurrunio said:

Maybe...? It's possible that the card doesnt apply its fan curve immediately after boot, but why Palit do this I'm not sure.

Could be something like that i guess. Its only a few seconds at the start tho, i can go into the BIOS and its running at the stock 35% while im tweaking stuff in there.

Ryzen 7 3700x, MSI B450 Tomahawk MAX, 16GB Ballistix Elite 3600MHz, MSI RTX 2070 Super Gaming X Trio, Corsair RM750x V2

Link to comment
Share on other sites

Link to post
Share on other sites

5 hours ago, Hemanse said:

my Palit 2070S Jetstream runs the fans at 100% on boot and then quiet down after a few seconds, is that normal? 

My previous graphics card did that too.

I believe it's just going to worst case scenario until it gets the temperature reading.

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, StarsMars said:

My previous graphics card did that too.

I believe it's just going to worst case scenario until it gets the temperature reading.

Thinking back i also think my MSI 770 Lightning card did that. Its a bit annoying, but mostly because im tinkering with my 3700x and rebooting quite a bit :) Trying to figure out 3700x voltage and core clocks comming from a 4670k is quite the task.

Ryzen 7 3700x, MSI B450 Tomahawk MAX, 16GB Ballistix Elite 3600MHz, MSI RTX 2070 Super Gaming X Trio, Corsair RM750x V2

Link to comment
Share on other sites

Link to post
Share on other sites

Yeah some cards do this, 

im sure my old EVGA 680ti did this

Folding Stats

 

SYSTEM SPEC

AMD Ryzen 5 5600X | Motherboard Asus Strix B550i | RAM 32gb 3200 Crucial Ballistix | GPU Nvidia RTX 3070 Founder Edition | Cooling Barrow CPU/PUMP Block, EKWB Vector GPU Block, Corsair 280mm Radiator | Case NZXT H1 | Storage Sabrent Rocket 2tb, Samsung SM951 1tb

PSU NZXT S650 SFX Gold | Display Acer Predator XB271HU | Keyboard Corsair K70 Lux | Mouse Corsair M65 Pro  

Sound Logitech Z560 THX | Operating System Windows 10 Pro

Link to comment
Share on other sites

Link to post
Share on other sites

21 hours ago, Hemanse said:

Recently build my new PC and everything is working good. One thing I have noticed tho is that my Palit 2070S Jetstream runs the fans at 100% on boot and then quiet down after a few seconds, is that normal? 

 

The card runs great, just seems kinda odd that it has to deafen me every time I boot up the PC :)

EVGA cards do this too. They run at 100% in reverse on boot to try and blow out dust.

Link to comment
Share on other sites

Link to post
Share on other sites

Thanks for the replies. Other than that I really like the card, whisper quiet while gaming. Under 100% load it hits around 63-64c at 12-1300rpm.

 

Playing Overwatch, the card barely hits 45c :)

Ryzen 7 3700x, MSI B450 Tomahawk MAX, 16GB Ballistix Elite 3600MHz, MSI RTX 2070 Super Gaming X Trio, Corsair RM750x V2

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×