Benchmarking New Build - Looking For Feedback

[jens1234]

Hey guys,

 

So I just finished my new build, and I'm testing out the performance.

 

Components:

 

CPU: Ryzen 3600 + NH-D15

GPU: MSI RTX 2080 Super Gaming X Trio

RAM: Corsair Vengeance LPX 3466 MHz 16-18-18-36 2x 8GB

SSD: Samsung 970 pro evo 1TB

Mobo: MSI Tomahawk MAX B450

 

The PC boots fine and I've experienced no issues yet. In benchmarks, the GPU and SSD seem to be performing at/slightly above expectations, but I'm not sure about my CPU and RAM.

 

When I run userbenchmark, it says that my RAM are performing below expectations - see https://imgur.com/a/DIYXMAQ. Is this normal? I've activated the A-XMP profiles to unlock the 3466 MHz 16-18-18-36 settings (and looking in CPU-Z, it looks like they are indeed running at these settings), and like I said I've had no issues with POST'ing or anything. The two kits are in slots DIMMA2 and DIMMB2 from the motherboard (I think this is where they are supposed to be inserted according to the manual). Is there anything I should do to remedy this, or is it fine?

 

Then in regards to my CPU: I've activated AutoOC in Ryzen Master and set the Boost Override CPU to the max of 200. Quiet and cool is activated in the BIOS, and my temps are fine (~40 C at idle and max 75 C when stressing for a few minutes). When running Cinebench R20, I get a score of 3545 with clocks sitting around 3950 across all cores (and a score of 472 with highest boost around 4100 for the single core test). Is this expected/normal? I did not upgrade the BIOS, so I am still sitting with version 7C02v30.

[jens1234]

21 minutes ago, alatron978 said:

Your ram should be preforming better the reads are lower then they should be (i get 41.2 MC read at 3066mhz) so its a bit low, write is fine same with latency. 3545 cb20 sounds fine.

Is this just a luck of the draw kinda thing in that I might've gotten some bad ram sticks, or can I do something to improve my situation?