Jump to content

Ryzen 3200G overvolting itself

lawliot
 Share
Posted

I was trying to set my ram to 3000mhz and failed. I reset everything by loading optimized defaults. Now the cpu is at 1.5v automatically. Resetting didn't do anything. What do I do?

really likes this

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Clear CMOS instead of reset.

 

If that doesn't solve the issue, give it a massive negative offset in voltage (offset mode) to balance out the stupid voltage behaviour.

 

what board is this?

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
7 minutes ago, Jurrunio said:

Clear CMOS instead of reset.

 

If that doesn't solve the issue, give it a massive negative offset in voltage (offset mode) to balance out the stupid voltage behaviour.

 

what board is this?

Sorry forgot to mention the board in original post - it's Asus B450ma with latest BIOS.

really likes this

Link to comment
Share on other sites
Link to post
Share on other sites
Posted (edited)
  • Author

@Jurrunio Is 1.438v normal when boosting to 4ghz? It stays in the 1.3v range all other times after I changed the offset.

 

edit: and it went up to 1.45v now

Edited by lawliot

really likes this

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
8 minutes ago, lawliot said:

@Jurrunio Is 1.438v normal when boosting to 4ghz? It stays in the 1.3v range all other times after I changed the offset.

 

edit: and it went up to 1.45v now

this is normal. this is from AMD please read

 

There is no enemy. The foe on the battlefield is merely the manifestation of that which we must overcome. The doubt, and fear, and despair. Every battle is fought within. Conquer the battlefield that lies inside you, and the enemy disappears like the illusion it is.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
3 hours ago, unsungheroist said:

this is normal. this is from AMD please read

 

Thanks for the read

 

Main System: Ryzen 2700, Asus Crosshair VII Hero, EVGA GTX 1080ti SC, 970 EVO Plus NVMe, Crucial Ballistix 3200mhz CL14, CM H500, CM ML240L cpu cooler.

Second System: Ryzen 2400G, Gigabyte B450 DS3H, RX 580 Nitro+, Kingston A400 SSD, Team T-Force 3200mhz CL15

If it ain't overclocked it ain't good...

 

AM4 boards VRM rating list: https://docs.google.com/spreadsheets/d/1d9_E3h8bLp-TXr-0zTJFqqVxdCR9daIVNyMatydkpFA/htmlview?sle=true#gid=639584818

Buildzoid's AM4 motherboard roundup: https://www.youtube.com/watch?v=ti38JS8RuPU

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
6 hours ago, lawliot said:

@Jurrunio Is 1.438v normal when boosting to 4ghz? It stays in the 1.3v range all other times after I changed the offset.

 

edit: and it went up to 1.45v now

@Tristerin You are a first gen user?

 

 

5 hours ago, unsungheroist said:

this is normal. this is from AMD please read 

That's Zen 2 behaviour, we're talking Zen.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
49 minutes ago, Jurrunio said:

@Tristerin You are a first gen user?

 

 

That's Zen 2 behaviour, we're talking Zen.

Correct, first gen after 1.4vCore I hold a 4.2ghz all core at all times and it never goes over 1.4vCore on the R7 1700

 

EDIT - Did OP mess with the wrong settings when messing with RAM and set his vCore up to high or mess with the SOC offset?

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Wifes Rig: ASRock B550m Riptide, Ryzen 5 5600X, Sapphire Nitro+ RX 6700 XT, 16gb (2x8) 3600mhz V-Color Skywalker RAM, ARESGAME AGS 850w PSU, 1tb WD Black SN750, 500gb Crucial m.2, DIYPC MA01-G case

My Rig: ASRock B450m Pro4, Ryzen 5 3600, ARESGAME River 5 CPU cooler, EVGA RTX 2060 KO, 16gb (2x8) 3600mhz TeamGroup T-Force RAM, ARESGAME AGV750w PSU, 1tb WD Black SN750 NVMe Win 10 boot drive, 3tb Hitachi 7200 RPM HDD, Fractal Design Focus G Mini custom painted.  

NVIDIA GeForce RTX 2060 video card benchmark result - AMD Ryzen 5 3600,ASRock B450M Pro4 (3dmark.com)

Daughter 1 Rig: ASrock B450 Pro4, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) Patriot Viper CL14 2666mhz RAM, Corsair HX850 PSU, 250gb Samsun 960 EVO NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MP30 M.2 SATA III SSD, SuperTalent 512gb SATA III SSD, CoolerMaster HAF XM Case. 

https://www.3dmark.com/3dm/37004594?

Daughter 2 Rig: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire Nitro+ R9 Fury Tri-X, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case

 

Link to comment
Share on other sites
Link to post
Share on other sites
  • 2 weeks later...
Posted

I have the 3400G and have been trying to find any info on normal voltages for this CPU as it auto over 1.5v a lot. On my MSI b450m GP, if I leave everything on auto it will stay very low at idle under 1v but if it boosts to 4.2ghz it will hit 1.531v. Was testing all core OC and it will only stick if its up near 1.5v 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
On 7/25/2019 at 6:57 PM, Tristerin said:

Correct, first gen after 1.4vCore I hold a 4.2ghz all core at all times and it never goes over 1.4vCore on the R7 1700

 

EDIT - Did OP mess with the wrong settings when messing with RAM and set his vCore up to high or mess with the SOC offset?

1.375v is apparently the highest safe voltage on Zen+ for 24/7 use, wouldn't go higher than that: 

 

 

Intel HEDT and Server platform enthusiasts: Intel HEDT Xeon/i7 Megathread 

 

Main PC 

CPU: i9 7980XE @4.5GHz/1.22v/-2 AVX offset 

Cooler: EKWB Supremacy Block - custom loop w/360mm +280mm rads 

Motherboard: EVGA X299 Dark 

RAM:4x8GB HyperX Predator DDR4 @3200Mhz CL16 

GPU: Nvidia FE 2060 Super/Corsair HydroX 2070 FE block 

Storage:  1TB MP34 + 1TB 970 Evo + 500GB Atom30 + 250GB 960 Evo 

Optical Drives: LG WH14NS40 

PSU: EVGA 1600W T2 

Case & Fans: Corsair 750D Airflow - 3x Noctua iPPC NF-F12 + 4x Noctua iPPC NF-A14 PWM 

OS: Windows 11

 

Display: LG 27UK650-W (4K 60Hz IPS panel)

Mouse: EVGA X17

Keyboard: Corsair K55 RGB

 

Mobile/Work Devices: 2020 M1 MacBook Air (work computer) - iPhone 13 Pro Max - Apple Watch S3

 

Other Misc Devices: iPod Video (Gen 5.5E, 128GB SD card swap, running Rockbox), Nintendo Switch

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×