3D Printed Cable Combs for Asiahorse PSU Extensions

[GMart84]

All in all I think they look okay maybe a little tight but they hold the cables nicely and even allowed me to print them in a 4x7 configuration for SLI and hold them in place pretty well.

 

[averagebilly]

21 minutes ago, GMart84 said:

All in all I think they look okay maybe a little tight but they hold the cables nicely and even allowed me to print them in a 4x7 configuration for SLI and hold them in place pretty well.

 

Those look nice. Good work!

[KING OF THE DIRTY DANS]

Do you have the STL file?

They look great

28 minutes ago, GMart84 said:

All in all I think they look okay maybe a little tight but they hold the cables nicely and even allowed me to print them in a 4x7 configuration for SLI and hold them in place pretty well.

 

[GMart84]

@averagebilly Thank you!

 

@KING OF THE DIRTY DANS Sure do so I am attaching them to this post.  I can also quickly make a 16 Pin one for dual 8 Pin Graphics Cards if you need it.

 

Print Settings on a PowerSpec i3 Plus (Wanhao i3 Plus):

Layer Height: 0.1 MM

Shell Thickness: 0.8 MM

Bottom/Top Thickness: 0.6 MM

Fill Density: 100%

Print Speed: 50 mm/s\

Printing Temp: 215

Bed Temperature: 65

 

Using Amazon Basics Black PLA

 

These are thin, I wanted something closed but that did not stick out much from the cables themselves.  All of the ones used in the pictures took a total of 1 hour and 11 minutes to print.

6 Pin Closed Cable Comb.stl

8 Pin Closed Cable Comb.stl

14 Pin Closed Cable Comb.stl

14 Pin Closed Cable Comb Double.stl

24 Pin Closed Cable Comb.stl

[KING OF THE DIRTY DANS]

11 hours ago, GMart84 said:

@averagebilly Thank you!

 

@KING OF THE DIRTY DANS Sure do so I am attaching them to this post.  I can also quickly make a 16 Pin one for dual 8 Pin Graphics Cards if you need it.

 

Print Settings on a PowerSpec i3 Plus (Wanhao i3 Plus):

Layer Height: 0.1 MM

Shell Thickness: 0.8 MM

Bottom/Top Thickness: 0.6 MM

Fill Density: 100%

Print Speed: 50 mm/s\

Printing Temp: 215

Bed Temperature: 65

 

Using Amazon Basics Black PLA

 

These are thin, I wanted something closed but that did not stick out much from the cables themselves.  All of the ones used in the pictures took a total of 1 hour and 11 minutes to print.

6 Pin Closed Cable Comb.stl

8 Pin Closed Cable Comb.stl

14 Pin Closed Cable Comb.stl

14 Pin Closed Cable Comb Double.stl

24 Pin Closed Cable Comb.stl

Thanks for linking them

[GMart84]

@KING OF THE DIRTY DANS Adding a 16 Pin version for as mentioned earlier for GPUs.  I will be working on my main rig tonight with these and will post more as they finish up.  I am hoping that these will allow me to run the two 8 PIN CPU cables together.

16 Pin Closed Cable Comb.stl

[GMart84]