Is something like this for noise reduction of HDDs still sold somewhere?

[Bramimond]

I have this for two HDDs and I didn't really notice how fantastic it was until I've installed a third HDD and didn't use something like it. The thing is noisy as hell. The whole case vibrates.

 

 

https://www.dexgo.com/index.php?site=artikel/view.php&rubrik=Hardware&id=58

 

I'm from Germany and I've been searching through amazon with various key words, but without any luck.

[2SidedPolygon]

Here's a bunch of stuff like that, not sure where they ship to though http://www.frozencpu.com/cat/l2/g33/c113/list/p1/Ultra_Quiet-HDD_Silencers.html

[Dissitesuxba11s]

Have you tried "Hard Disk Drive Anti-Vibration Screw?" Something like these: http://www.frozencpu.com/cat/l3/g33/c113/s569/list/p1/Ultra_Quiet-HDD_Silencers-HDD_Rubber_Screws-Page1.html

 

Not sure how effective these are since I've never used them.

[Eastman51]

This is a set of anti-vibration mounts: https://www.newegg.com/Product/Product.aspx?Item=1YF-0023-00035

 

May be what you're looking for, but not 100% sure

 

[Tristerin]

Look up:

 

HP Pro 6300 HDD Screws

See Measurements (or pay $6 bucks for 4 screws with rubber grommets)

 

Go to hardware store, get the proper thread/length, buy the rubber washers - $2.50 or less for 50 or so mounts.

[Bramimond]

None of those have the square angle mounting points, though. Just putting rubber inbetween isn't enough. That will just absorb some of the vibration, not completely decouple the whole drive.

 

With the stuff pictured above, you can take the drive mounted inside the case inside your hand and try to move it in either direction and whatever power you have won't even move the case (if the case is heavy enough). It's completely decoupled. You can move the drive a few mm/cm, but that's it. The effect is that the HDD basically gets as silent as an SSD would be.

 

EDIT: Found it https://www.amazon.de/gp/product/B00PNRT6YG/

A little expensive, but oh well. At least it works.