No signal, gpu fans spin then stop, bios led turned on and tones led codes

[Elliotclark3401]

Okay so basically after finally getting my home built pc to completion, i couldnt actually get the pc to connect to my monitor, my gpu fans would spin then stop, my bios light on my mobo is swithed  on and so is an led under my cpu. I also have this LED display on my motherboard that gives coded such as: FC, 64, 61, 02, A1 e.g. im not sure what they are. I dont get any beeps, and i also changed the ram in many slots and did one at a time but each slot i do i get new codes (i mostly get "FC" code) by the way all connections are correct, everything is solid tight and fixed into position. I also checked for cpu pin bends or misplacing and it seems to be all okay, any suggestions?

 

Specs

Cpu: ryzen 5 1600x

Motherboard: gigabyte ax370

Gpu: strix gtx 950

Psu: corsair cx 750M

Ram: ballistic sport 8gb ddr4 (not the best but was told it shouldnt be an issue 

[Radium_Angel]

17 minutes ago, Elliotclark3401 said:

any suggestions?

mobo codes will be in the mobo manual

[Turtle Rig]

11 minutes ago, Radium_Angel said:

mobo codes will be in the mobo manual

Yes, also if your getting a Red Light upon bootup then your CPU or RAM is botched depends which light turns red.  You should never get a red light upon boot up, and if you do then the motherboard or CPU is botched.

[Elliotclark3401]

1 hour ago, Turtle Rig said:

Yes, also if your getting a Red Light upon bootup then your CPU or RAM is botched depends which light turns red.  You should never get a red light upon boot up, and if you do then the motherboard or CPU is botched.

Thats a shame, they are both brand new and i have no money

[Turtle Rig]

17 minutes ago, Elliotclark3401 said:

Thats a shame, they are both brand new and i have no money

It's ok man.  Just FYI 00 code means dead on arrival CPU.  Is long as your not getting that then your RAM is fine your CPU is fine and PSU is fine.  The motherboard is the culprit, can't you RMA her ?

[Elliotclark3401]

2 minutes ago, Turtle Rig said:

It's ok man.  Just FYI 00 code means dead on arrival CPU.  Is long as your not getting that then your RAM is fine your CPU is fine and PSU is fine.  The motherboard is the culprit, can't you RMA her ?

Well thats a relief i havent seen the 00 error code .YET. but can you thurther elaborate on RMA? thanks 

[Turtle Rig]

3 minutes ago, Elliotclark3401 said:

Well thats a relief i havent seen the 00 error code .YET. but can you thurther elaborate on RMA? thanks 

How long have you had the motherboard for, is it under warranty ?  You would call them and tell them the motherboard is dead.  Then they would set up a RMA so you can ship your current mobo and when they recieve they will send you a new one.

[Elliotclark3401]

6 minutes ago, Turtle Rig said:

How long have you had the motherboard for, is it under warranty ?  You would call them and tell them the motherboard is dead.  Then they would set up a RMA so you can ship your current mobo and when they recieve they will send you a new one.

Ive had the mobo for quite some time but it hasnt been used until a few weeks ago and im pretty sure the warranty has ran out, so which is a shame