Jump to content

Lian Li PC-O11 Dynamic - Rad Support

cluelessgenius
By cluelessgenius
in Power Supplies
 Share
Go to solution Solved by fabafaba,
8 minutes ago, cluelessgenius said:

basically replacing my case with the hardware in the signature

 

so what would this distance be 

image.png.2fdff01fe93e1f2d1cf80f5a2efd9827.png

if i mounted the fitting on top of the card

 

also is there an unused pci bracket above your card?

Oh, the MSI aero is perfect, because you don't have the DVI port in the bottom, that would interfere with a 80mm rad. And yes, there is an unused bracket, because ATX mobos usually don't have PCIE slots right under the I/O.

InkedIMG_20190108_124500_LI.thumb.jpg.cd5e6d05b67ed978672a63a04a864cd0.jpgIMG_20190108_131137.thumb.jpg.f011a7339fd3682f09bc750aa0fd19da.jpg

But that's where your mITX board shines with its higher 16x slot. In my case with the top bracket unused, the distance you asked for is still 40mm. With the higher PCIE slot you get 20mm in addition, or enough for a 80mm rad and the fittings like I have them in the bottom.

Posted
2 minutes ago, cluelessgenius said:

making a model to plan the best way of routing tubes and all

The loop as I have it routed won't fit a third radiator in the side with the pump mounted like I have it, you'd have to put it between the top and bottom rads instead of next to them, to make a third rad fit. I also realized that you can propably get to the GPU inlet from the bottom. Your Monsta radiator is 26mm higher than mine, but your GPU will also be 20.3mm higher. Between the fans and the hardtube fitting down there I have 5mm space, so it'll be pretty tight, unless you mount the fans underneath the radiator, because that will give you some more space.

PC: Screw day theme users, I guess ¯\_(ツ)_/¯

CPU: R9 3900X @ 4.375GHz All Core MoBo: ASRock X470 Taichi RAM: 2x16GB Mushkin Redline @ 3200MHz 16-18-18-36 GPU: GTX 1080TI FE @ 2088MHz Cooling: Single 60x360mm rad w/ Scythe Kaze Flex, dual 45x540mm external rads passive, Nickel Plexi EKWB blocks, Alphacool VPP755V3 + Watercool Heatkiller Tube 250, Aquacomputer Quadro Case: Inter-Tech 4U 4129-N PSU: Corsair RM1000x Storage: 1TB Samsung 980 M2 SSD, 1TB Seagate Barracuda  Q1 SSD Network: Mellanox ConnectX-3 10G

 

NAS & Proxmox:

CPU:  Epyc 7302 MoBo: Supermicro H11SSL-i RAM:  8x32GB @ 2666MHz Samsung Registered ECC  Cooling: Enermax Liqtech TR4 II 360 w/ Corsair ML120 Case: InterTech 4F28 PSU: Seasonic Focus PX-650 Storage: 8x6TB HGST + 2x1TB WD Blue SN570 + 2x16GB Intel Optane SSDs Network: Mellanox ConnectX-3 10G

 

ML-Compute Server:

CPU:  i5 10600K MoBo: MSI MPG Z490 Gaming Plus RAM: 4x8GB HyperX Fury @ 2133MHz8 GPU: Gainward GTX 1080TI Golden Sample Cooling: Single 30 Case: RackMax 2U 8-Bay Storage Case Storage: 512GB Patriot P300 + 4x2TB Seagate Ironwolf NAS Network: Intel Quad 1G

Laptop: Acer Travelmate B117 (absolutely low power, but 12h battery life :D)

Phone: Oneplus Nord

Peripherals:

Monitor: LG 34UC79G + 27GL63T Keyboard: KBDFans 65Rev2 Mouse: Logitech G603 Mousepad: Cheap-ass GMB Mouspad Headphones: AKG K7XX  Other stuff: Novation Launchpad MK2, Aune T1 USB DAC/Amp, Behringer UMC202HD + Audio Technica AT2020 Condenser Mic

Cameras:

DSLR: Canon EOS 600D (Magic Lantern OS) Action Cam: GoPro Hero 3 Silver

Mountainbike:

Frame: Banshee Legend MKIII Fork: Marzocchi 380 C2R2 Titanium Rear shock: Rock Shox Vivid Air/Coil (switched depending on how I feel) Wheels: Spank Spike Race 33 Tires: Maxxis Minion DHR2/DHF Brakes: Magura MT5 Calipers with Shimano XT Levers Deraileur: Shimano Zee, Casette reduced to 6 Speed Crankset: Truvativ Descendant + 38T FSA Chainring Wheight: 16.4kg w/o pedals

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
2 minutes ago, fabafaba said:

The loop as I have it routed won't fit a third radiator in the side with the pump mounted like I have it, you'd have to put it between the top and bottom rads instead of next to them, to make a third rad fit. I also realized that you can propably get to the GPU inlet from the bottom. Your Monsta radiator is 26mm higher than mine, but your GPU will also be 20.3mm higher. Between the fans and the hardtube fitting down there I have 5mm space, so it'll be pretty tight, unless you mount the fans underneath the radiator, because that will give you some more space.

not really the plan anyway but i guess ill have to wait and make my own model to plan thing out. im not using fancy pants software like back in the day now im just messing around with tinkercad for rough estimates. actually not that bad

 

"You know it'll clock down as soon as it hits 40°C, right?" - "Yeah ... but it doesnt hit 40°C ... ever  😄"

 

GPU: MSI GTX1080 Ti Aero @ 2 GHz (watercooled) CPU: Ryzen 5600X (watercooled) RAM: 32GB 3600Mhz Corsair LPX MB: Gigabyte B550i PSU: Corsair SF750 Case: Hyte Revolt 3

 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Power Supplies

×