Jump to content

Need help!!! Monitor bezel removal

GUxSnipes

I am trying to paint the bezel of my AOC Agon AG271QG and i was just wondering if anybody could provide any tips or how to remove the bezel from the monitor or if I should just mask off the monitor and paint over it?

Link to comment
Share on other sites

Link to post
Share on other sites

i think the front panels on most monitors are removable, but i'm not certain. you should see if your model has a front bezel that can pop off. 

Rig 1: i7-9700k OC'd to 5.0ghz all core | EVGA XC RTX 2080Ti | ADATA DDR4 2400mhz 4x8gb | ASUS PRIME Z370-P | Asetek 550LC 120mm | ADATA 480GB SSD & Toshiba P300 3TB | Cooler Master Masterbox MB500 | Win 10 Home | Logitech G910 Orion Spectrum, G502 Proteus Spectrum, G933 Artemis Spectrum Snow Wireless Limited Edition, Corsair MM300 Mouse Pad | 2 MSI Optix Curved 27" FHD Monitors 

 

(before i sold the WD drive and MSI gpu - https://www.userbenchmark.com/UserRun/11946219 171 gaming. felt good.)

 

Rig 2: i7-7700k Stock clocks | MSI Armor GTX 1070 | ADATA DDR4 2400mhz 2x8GB | MSI Z270 A-Pro | WD Green 240GB SSD & 2TB Seagate HDD | Thermaltake Core G21 Tempered Glass Edition | Win 10 Home | 2 HP Omen FHD 144hz 24.5" Monitors 

 

Rig 3: i7-6700 | GT 730 & GT 645 OEM | Some random DDR4 2133mhz 2x8gb sticks | OEM Dell Mobo | WD Black 2TB HDD & Toshiba 1TB HDD | Win 10 Home | 3 27" Dell FHD Monitors 

 

Rig 4: i7-4770 | EVGA SSC 1050ti | Some random DDR3 ram 2x2gb and 2x4gb sticks | OEM Dell Mobo | Stock Cooler | 1TB WD Black HDD | Win 7 Home 

 

RIP 

 

Rig 5 (dead and dismantled and sold) : i7-7820X OC'd to 4.8ghz all core | MSI DUKE 1080ti | ADATA DDR4 2400mhz 4x8gb | Gigabyte X299 UD4 PRO | Asetek 240mm AIO | WD Green 240gb SSD | Other various components that I can't remember

 

Rig 6 (same fate as rig 5) i7-8700k stock clocks | MSI DUKE 1080ti | ADATA DDR4 2400mhz 2x8gb | MSI Z370 A-Pro | Asetek 550LC 120mm | WD Green 240GB SSD & Toshiba 2TB HDD | Other various components that I can't Remember 

Link to comment
Share on other sites

Link to post
Share on other sites

Screws are on the back if not most likely its clicked (or in certain cases glued) in place.

When i ask for more specs, don't expect me to know the answer!
I'm just helping YOU to help YOURSELF!
(The more info you give the easier it is for others to help you out!)

Not willing to capitulate to the ignorance of the masses!

Link to comment
Share on other sites

Link to post
Share on other sites

Hi there, I do a lot of work moding TVs, for a brand like that one, you should start at the screws on the back. On the inside more than likely the front bezel is going to be screwed to the back lighted area.

Now here is the tricky part, and diffent manufactures do this differently, the front bezel may be cosmetic, eg. does not hold anything together, it may hold the LCD panel to the backlight with the LCD panel being loose, or worse case the LCD panel may be glued to the front bezel. 

My best recommendation would be to remove the bezel if possible to paint it, but be very careful when you do.

If you need any specific help, pictures help.

DSC_0001_2.JPG

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×