need help with a new build

[rasfsfsd]

my budget is AUD$2000-$2200

the build will be used for streaming (not often), editing (adobe) and gaming. gaming will be the main focus of the build 

i prefer if it say a nvidia card as i may end up with a g-sync monitor.

i also need some rgb led fans

i was given the case so i dont need one

https://www.pccasegear.com/products/37350/phanteks-enthoo-luxe-tempered-glass-window-black

[Mad153]

*nvidia*

[5ir5ly]

Save a little more https://www.pccasegear.com/products/44525/pccg-eclipse-2070-gaming-system

[IrtazaAbbas]

i7-9700k and a 1080ti paired with a Z-390, 32GB RAM, go.

[Cereal5]

What resolution/refresh rate are you playing at, and what games will you be playing?

[rasfsfsd]

12 minutes ago, Cereal5 said:

What resolution/refresh rate are you playing at, and what games will you be playing?

1080p/ 144hz and rainbow six siege

medieval engineer 

house flippers 

[rasfsfsd]

26 minutes ago, 5ir5ly said:

Save a little more https://www.pccasegear.com/products/44525/pccg-eclipse-2070-gaming-system

the case would go to waste

[Cereal5]

PCPartPicker part list / Price breakdown by merchant

Type	Item	Price
CPU	AMD - Ryzen 7 2700 3.2 GHz 8-Core Processor	$389.00 @ Mwave Australia
CPU Cooler	be quiet! - Dark Rock 4 CPU Cooler	$99.00 @ PCCaseGear
Motherboard	MSI - X470 GAMING PLUS ATX AM4 Motherboard	$209.00 @ Umart
Memory	Corsair - Vengeance LPX 16 GB (2 x 8 GB) DDR4-3200 Memory	$200.68 @ Amazon Australia
Storage	Samsung - 860 Evo 500 GB 2.5" Solid State Drive	$118.00 @ Umart
Storage	Seagate - Barracuda 2 TB 3.5" 7200RPM Internal Hard Drive	$82.00 @ Shopping Express
Video Card	Gigabyte - GeForce RTX 2070 8 GB WINDFORCE Video Card	$749.00 @ Umart
Power Supply	EVGA - SuperNOVA G2 750 W 80+ Gold Certified Fully-Modular ATX Power Supply	$146.00 @ IJK
	Prices include shipping, taxes, rebates, and discounts
	Total	$1992.68
	Generated by PCPartPicker 2018-11-28 22:39 AEDT+1100

This should be more than enough for all your tasks. Plenty of cores for the streaming and editing, and a fantastic GPU for pretty much any game. You could downgrade to a 1070/1070 Ti if you wanted to save a couple hundred dollars. Both cards will perform great at 1080p 144Hz. You can also downgrade to a 250GB SSD if you want to save a nother $50 or so, but extra SSD storage is always great to have.

[jnthnbgg]

So you want RGB, if you want an addressable LED setup pay attention to the Mobo LED pin connector. Make sure it is compatible with addressable LEDs. This way you can either but compatible kits or build your own with APA102 LEDs and a Arduino(or Rasberry Pie).

If you go diy you can get far brighter and smoother color transitions than any kit. Not very plug and play though, it is quite involved. For the time being I would shower ever for a 1080(or 1080 TI if you score a middle of the night deal... $480 for my TI)

 Def. an i7-8700k paired with a Z390 RGB Mobo. PcPartPicker can help you make sure it is all compatible.

  That should get you rolling in the right direction.

[rasfsfsd]

4 minutes ago, jnthnbgg said:

So you want RGB, if you want an addressable LED setup pay attention to the Mobo LED pin connector. Make sure it is compatible with addressable LEDs. This way you can either but compatible kits or build your own with APA102 LEDs and a Arduino(or Rasberry Pie).

If you go diy you can get far brighter and smoother color transitions than any kit. Not very plug and play though, it is quite involved. For the time being I would shower ever for a 1080(or 1080 TI if you score a middle of the night deal... $480 for my TI)

 Def. an i7-8700k paired with a Z390 RGB Mobo. PcPartPicker can help you make sure it is all compatible.

  That should get you rolling in the right direction.

is it hard to do it myself. cause it sounds very interesting to do it myself as a little side project

[rasfsfsd]

4 minutes ago, Cereal5 said:

PCPartPicker part list / Price breakdown by merchant

Type	Item	Price
CPU	AMD - Ryzen 7 2700 3.2 GHz 8-Core Processor	$389.00 @ Mwave Australia
CPU Cooler	be quiet! - Dark Rock 4 CPU Cooler	$99.00 @ PCCaseGear
Motherboard	MSI - X470 GAMING PLUS ATX AM4 Motherboard	$209.00 @ Umart
Memory	Corsair - Vengeance LPX 16 GB (2 x 8 GB) DDR4-3200 Memory	$200.68 @ Amazon Australia
Storage	Samsung - 860 Evo 500 GB 2.5" Solid State Drive	$118.00 @ Umart
Storage	Seagate - Barracuda 2 TB 3.5" 7200RPM Internal Hard Drive	$82.00 @ Shopping Express
Video Card	Gigabyte - GeForce RTX 2070 8 GB WINDFORCE Video Card	$749.00 @ Umart
Power Supply	EVGA - SuperNOVA G2 750 W 80+ Gold Certified Fully-Modular ATX Power Supply	$146.00 @ IJK
	Prices include shipping, taxes, rebates, and discounts
	Total	$1992.68
	Generated by PCPartPicker 2018-11-28 22:39 AEDT+1100

This should be more than enough for all your tasks. Plenty of cores for the streaming and editing, and a fantastic GPU for pretty much any game. You could downgrade to a 1070/1070 Ti if you wanted to save a couple hundred dollars. Both cards will perform great at 1080p 144Hz. You can also downgrade to a 250GB SSD if you want to save a nother $50 or so, but extra SSD storage is always great to have.

quick question, does that motherboard support wifi

[Cereal5]

No, but you can get a wireless adapter like any one of these.

[rasfsfsd]

1 minute ago, Cereal5 said:

No, but you can get a wireless adapter like any one of these.

sweet alright thank you for the help. the build looks nice. that psu isnt too big?

[Cereal5]

1 minute ago, rasfsfsd said:

that psu isnt too big?

No such thing. I picked it because 550 watts is pushing it, in terms of being too small, and that 750W unit was the same price or cheaper than any 650W unit, and it's very high quality.

[rasfsfsd]

11 minutes ago, Cereal5 said:

No such thing. I picked it because 550 watts is pushing it, in terms of being too small, and that 750W unit was the same price or cheaper than any 650W unit, and it's very high quality.

alright sweet. thanks for the help i wil look over the build and change a few parts. last couple of things. will the board let me overclock if i ever need to. and is it worth going up to the 2700x

Edited November 28, 2018 by rasfsfsd
forgot something

[rasfsfsd]

20 minutes ago, jnthnbgg said:

So you want RGB, if you want an addressable LED setup pay attention to the Mobo LED pin connector. Make sure it is compatible with addressable LEDs. This way you can either but compatible kits or build your own with APA102 LEDs and a Arduino(or Rasberry Pie).

If you go diy you can get far brighter and smoother color transitions than any kit. Not very plug and play though, it is quite involved. For the time being I would shower ever for a 1080(or 1080 TI if you score a middle of the night deal... $480 for my TI)

 Def. an i7-8700k paired with a Z390 RGB Mobo. PcPartPicker can help you make sure it is all compatible.

  That should get you rolling in the right direction.

https://www.pccasegear.com/index.php?main_page=product_info&products_id=42186&cPath=1874&utm_source=googlebase&utm_medium=cse&utm_campaign=export_feed#googlebase

 

would this board work

[jnthnbgg]

4 hours ago, rasfsfsd said:

is it hard to do it myself. cause it sounds very interesting to do it myself as a little side project

It's not terrible. My first time I spent a lot of time doing research. The hardest part is making sure everything is the same type of led. That and learning how to upload to Arduino or Rasberry Pie if you have never done that before. The alternative to doing any programming is get a controller that has all the effects you want, find out what LEDs that controller used and just buy your own strips of LEDs. It is a lot cheaper. Just be aware the pre set controller may only allow up to so many LEDs due to programming. There are a ton of tutorials but I will tell you honestly, it is time consuming and you couldn't spend not than a set if you mess up. But that is the price for knowledge sometimes. 

Overall I thoroughly enjoyed doing my own but I also have an electrical background too, so. I recommend doing some research on it and seeing if it is what is right for you. I ultimately went on to make my own Christmas lights and program them to music so learning this has much larger possibilities too.

Either way enjoy the build!

[jnthnbgg]

4 hours ago, rasfsfsd said:

https://www.pccasegear.com/index.php?main_page=product_info&products_id=42186&cPath=1874&utm_source=googlebase&utm_medium=cse&utm_campaign=export_feed#googlebase

 

would this board work

That board has 2 50/50 LED connectors and one addressable. Not sure why on earth you would both giving it a 50/50 connector when sb2812 and apa102 LEDs exist. Overall though it should work. I have never worked with MSI's LED controls. mostly ASUS and some Giga. However it does list many companies that it is compatible with so I don't see why it shouldn't work.

[jnthnbgg]

Here is a link to how I bypass the limitations put out by the MOBO LED controller when using the on board controller and not an Arduino. Keep in mind you have to power it as they state from the PSU.