Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

Flippern

Member
  • Content Count

    34
  • Joined

  • Last visited

Awards

This user doesn't have any awards

About Flippern

  • Title
    Member

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. I've tried swithing cables around, but everytime i do it with my Playstation it works. So it isnt the cables or the Monitor its just the PC or the GPU. I can't see anything from the PC, its the monitor that says "No Signal Detected", so i cant go into any settings on the PC.
  2. I have two BenQ Zowie XL2740 27 inch screen, and when i turn on my PC it says «No Signal Detected». Visually, everything seems good, but there is obviously something wrong. I recently bought a new PSU so i have fickled with some of the cables, so there may be something there that has to change. I’ve tried turning both the monitor and my PC off and everytime it just says there is no signal.
  3. i tried to detach it from the motherboard, but it was just the same after, no signal. No, nothing that I could see or that catched my eye. It looks like it's operating normally.
  4. Yes, i tried unplugging and plugging both HDMI and DisplayPort. I used a HDMI from a PS4 and it worked. So it is just that the GPU isnt sending any signal out, even tho its on
  5. Yes, everything is plugged in and working, everything that is connected to the motherboard like my m&k are working and everything is lighting up, it’s just the signal between the GPU and the monitor that is not working. It looks like the gpu isn’t sending any signal…
  6. I kinda sorted this out too, i just had to restart my pc then it worked fine again. thanks for the help!
  7. I have two BenQ Zowie XL2740 27 inch screen, and when i turn on my PC it says «No Signal Detected». Visually, everything seems good, but there is obviously something wrong. I recently bought a new PSU so i have fickled with some of the cables, so there may be something there that has to change. I’ve tried turning both the monitor and my PC off and everytime it just says there is no signal.
  8. I found my initial problem (which was i was using old cables from the previous PSU). Now i’ve changed the cables to the same as the PSU im using now, but now, my PC turns on then off, then on , and repeat, or it looks like it is resetting it selft all the time…
  9. Ok, now i’ve changed the cables to the same as the PSU im using now, but now, my PC turns on then off, then on , and repeat, or it looks like it is resetting it selft all the time…
  10. Im using all new except the one that goes to the GPU
  11. I bought a new PSU (Corsair RM850x, 850 W) and i’ve connected all the cables (at least i thinks so). I connected to the CPU, one/two to the GPU, one to my Hard drive, and one to my motherboard (the big one). When i plug in the socket into the pc, the lighting off the ethernet cable lights up (so there is some power), but when i go to turn it on, there is a little noise, like the power just went, and nothing happens. How can i fix it so my PC turns on?
×