Jump to content
Search In
  • More options...
Find results that contain...
Find results in...


  • Content Count

  • Joined

  • Last visited


This user doesn't have any awards

About lrac_0312

  • Title

Contact Methods

  • Steam
  • Origin
  • UPlay

Profile Information

  • Location
  • Gender
  • Occupation


  • CPU
    Ryzen 5 1400 3.6Ghz 1.28v
  • Motherboard
    Asus TUF B450M Pro Gaming
  • RAM
    8GBx2 Team Group T-Force TUF Gaming RGB RAM 3200 CL16
  • GPU
    MSI Armour RX570 4GB OC Edition
  • Case
    CDR King Gaming Case from 2011
  • Storage
    Kingston A2000 240GB NVme SSD Gen 3 Seagate 1TB HDD Seagate 500GB HDD Hitachi 320GB HDD Sandisk X110 128gb SSD SATA II
  • PSU
    Topower 800w 80+ Bronze
  • Display(s)
    N-Vision 24inch Curve 75hrz AOC 20inch 936w
  • Cooling
    be quite! Pure Rock 150w TDP, Tecware Orbis f3 Case fan PWM x6
  • Keyboard
    Cliptec Stegocoria RGK833 Hot Swap Mechanical Gaming keyboard
  • Mouse
    Reddragon Gainer gaming mouse
  • Sound
    Edifier M1360 2.1 channel Computer speaker
  • Operating System
    Windows 10 Pro
  • Phone
    Samsung Galaxy S8

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Is anyone playing dragon quest builders 2? I know my GPU is not that powerful I'm Running an MSI Armour Rx 570 4GB OC edition. But during gameplay I reach up to 80c on my card. All on factory OC of 1268 core clock and 1750 memory frequency and stock fan curve. Overclocked it to core clock 1350 and 2000 for memory ,undervolted it and ran an aggressive custom fan curve got it to mid to high 60's. It was just baffling to me, as the game dies not seem to have a very detailed graphics. Anyone experience this? or was just me? TIA
  2. Thanks for the reply. It would be a hassle swapping it out though. Ill try selling this board if someone would get it, just bought it this month. Should have done more research. Chose the Tuf as I have a tuf Tforce Delta ram RGB ram and thought it only supports Asus aurasync. Dug deeper and saw it also works with Asrock Polychrome. I blame team groups product page. lol
  3. So just upgraded my motherboard from an MSI A320M Pro VD/S to an ASUS Tuf b450m Pro Gaming, however I'm having buyers remorse as I saw the Asrock b450m Steel Legend looking bad ass as well as having an ARGB 3pin 5v socket and better audio outputs. Which do you think is better? specially in terms of VRM performance. Though I'm only using a Ryzen 5 1400,but planning to swap it out in the future with a ryzen 5 3600. https://www.asrock.com/mb/amd/b450m steel legend/ https://www.asus.com/Motherboards/TUF-B450M-PRO-GAMING/
  4. Probably need to dial back my overclock. My CPU is placed in a cramp place, that might be the problem
  5. At 80c set the fan to run 100%. While playing fan run around 3500 to over 4500 rpm
  6. Overclocked my MSI RX570 4GB Armour OC to 1400 under volt it to 1090. Its pretty stable but playing Star Wars Fallen Order temps reaches to 83c max stays around 79-81c most of the time. Is that safe?? or should I hold back my temps. Also Played Resident evil 3 Remake with max temp at 81c.
  7. So reseated the ram to slots 2 and 4, and I am able to turn on DOCP with no errors was even able to bump up cpu freq to 3.8 at 1.35v while getting better thermals. with "recommended configuration" I was not able to get DOCP and not reaching stable run at 3.8.
  8. BTW I reseat my ram based on the manual recommended config. before overclocking placed is at the furthest slots 2 and 4 respectively. but after i checked the manual it recommended it to placed at the nearest meaning slots 1 and 3. Before that i was able to set the ram at 3200 manually with voltages at auto and not using DOCP. does this matter?
  9. tweaked it a little I got 2800 1.35v for my ram CL18 though, set the timings at auto. how much higher can I push dram volts?
  10. Have overclocked my Proc now running 3.7 at 1.3v tried running at 4.0 but its not having it. crashing immediately. Ran it at 3.8 at 1.35 was not stable was able to start Cinebench r20 but crashes in the middle. Ran it with 3.7 at 1.35 finished is now ran it at 3.7 at 1.3 still fine. Although I cant seem to overclock my RAM. Its rated at 3200 CL16. At default ran at 2400 CL16 enabled DOCP setting at 3200 CL16 1.35 but wont even post, Now running it at 2666 CL16. Should i push my ram more at 3200 but higher latency like 18?
  11. Thanks so much for the replies. Would try these methods out. Will update this thread on what happens. Lots of luck for me. LOL
  12. What voltages should I start with? This will be my first time overclocking and Im planning to use Ryzen master software
  13. Hey Guys, I want to dabble with overclocking and push more performance out of my Processor. My current setup is Ryzen 5 1400 at stock 3.2Ghz at 1.11875v be quite! Pure Rock 150w TDP Asus Tuf B450M Pro Gaming motherboard Team Group T-Force Tuf Gaming Alliance RGB RAM 8gb x2 3200 CL16 MSI Armour RX570 4GB Kingston A2000 240GB NVme Gen 3x4 TopPower 800w 80+Bronze Temps at Idle Proc would be 45-55c in load using aida64 max would be high 60 depends on ambient temp. Its pretty hot here in the Philippines specially noon to mid afternoo
  14. Thanks for the amazing replies. One more question, Are these fan good enough to be used in an AIO? I'm also planning to buy one soon and thinking of using these fans instead of the included ones. Eyeing this one https://www.bykski.us/collections/240mm-aio-1/products/bykski-aio-integrated-liquid-cpu-cooler-w-a-rgb-240mm-b-frd240-rbw
  15. Hi I am thinking of buying case fans for my build, and I'm vacillating between a fan kit that has PWM socket for motherboard control or one without motherboard PWM control but has RGB strip ports and is cheaper. Though both are from budget Chinese companies, I'm having a hard time in choosing. Is it better to control the fans through the motherboard? or just manually adjust it with the included remote. These are the Fan kits I'm thinking of buying https://www.tecware.co/orbisf1f3 https://darkflashtech.com/collections/case-fan/products/darkflash-dr12-pro-3-pa