Jump to content
Search In
  • More options...
Find results that contain...
Find results in...


  • Content Count

  • Joined

  • Last visited

Everything posted by Toradoshi

  1. I bought a new Asus ROG Strix x570-e motherboard, I got the same result with a no post condition. I have a strong suspicion I got a bad CPU. I’ve RMAd the CPU, going to buy another AMD Ryzen 9 3900x.
  2. I’ve tested the new ram and the computer still won’t post. Since this is the 3rd new ram kit I’ve tried and it being on the QVL as well, I feel the ram may not be the issue.
  3. I agree, I think the motherboard may not like the ram, I just went ahead and purchased a slower ram kit that is confirmed on the QVL for this motherboard. So I bought a different brand and slower speed with this: Patriot Memory Viper 4 Series 3000MHz (PC4 24000) 8GB Dual Channel DDR4 Kit PV48G300C6K That’s a really good point you make about the ram voltage. As soon as this ram comes in I’ll give it a try. Yes, I’ve let the computer just do it’s thing, I actually let it sit there running for over an hour while I just stared at it thinking.
  4. I’ll try booting from the backup BIOS. When pressing the CMOS button, the user manual states to turn off the PSU and remove the power cord as well as pressing and holding the power button to discharge any power left, then to click the CMOS. I made sure not to allow power to the board while clearing, also, I did a bit of redundancy by removing the CMOS battery just in case the rear I/O CMOS was inoperable. I went out and bought more RAM, but I can go out again and try something else that’s on the QVL.
  5. Ok, I verified there is no film on the CMOS battery impeding functionality. Switching to single BIOS did nothing, as the Main BIOS loads first by way of the default being the Main BIOS switch.
  6. Yes, I’ve tried using a single dim. I’ll take a look at the CMOS battery for a film of some sort. My BIOS switches are set to Main BIOS and dual BIOS. I’ll try Main BIOS and single BIOS right now.
  7. On Gigabyte motherboards with Q flash +, the CPU does not need to be installed in order to flash the BIOS. Yes, I had the power cord disconnected and held the power button to discharge any remaining power prior to installing the CPU and RAM. Yes, I checked the Gigabyte Aorus Master QVL for compatibility with the memory kit. As stated above, I did try the step you mentioned with 1 RAM stick in each slot.
  8. Hello everyone! I have a new pc build and I'd like to get it to work. 1. System configuration: CPU: AMD Ryzen 9 3900x Motherboard: Gigabyte Aorus Master x570 (does not come with onboard video) PSU: Corsair RM850x (850watts) --Additional PSU on-hand for testing: Silverstone 1500watt RAM: Corsair Vengeance RGB PRO DDR4 2x16GB 3200MHz (CMW32GX4M2C3200C16) --Additional RAM on-hand for testing: Corsair Vengeance RGB PRO DDR4 2x8GB 3200MHz (CMW16GX4M2C3200C14) SSD: Gigabyte Aorus NVMe Gen4 M.2 1TB PCI-Express 4.0 Toshiba 3D NAND (GP-ASM2NE6100TTTD)
  9. Any updates? Were you able to find a resolution to this issue? I’m currently in the exact same boat.