Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

nhess

Member
  • Content Count

    102
  • Joined

  • Last visited

Awards

This user doesn't have any awards

About nhess

  • Title
    Member

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Is it safe/does it work to try and get your comp to boot before you install the cpu cooler?
  2. Ok so I was swapping out my wraith spire for a dark rock pro 4 and when I installed the dark rock the computer would no longer boot and was stuck at the first dbug led. I tried to swap the CPU out to a ryzen 2600 which I have laying around and it would get stuck on boot. I thought maybe the issue was with the mobo so I went out and bought a B550, but I am not able to boot either. Both the 5600x and the 2600 get to the boot dbug led and then turn off. One of the things that could have gone wrong is the dark rock only had 3 out of 4 spacers and I installed it without all of them. Maybe it was ov
  3. Ok so I was swapping out my wraith spire for a dark rock pro 4 and when I installed the dark rock the computer would no longer boot and was stuck at the first dbug led. I tried to swap the CPU out to a ryzen 2600 which I have laying around and it would get stuck on boot. I thought maybe the issue was with the mobo so I went out and bought a B550, but I am not able to boot either. Both the 5600x and the 2600 get to the boot dbug led and then turn off. One of the things that could have gone wrong is the dark rock only had 3 out of 4 spacers and I installed it without all of them. Maybe it was ov
  4. I tried to install my dark rock pro and when I got done my computer wouldn't boot. Stuck on first dbug led. Everything seems to get power like mouse and keyboard and case/cpu fans. Anyone know why this might be? It was kind of a rough install cus I installed it in the motherboard already in the case. Maybe I hurt the motherboard somehow? For context it's a 5600x in a b450 tomahawk
  5. Someone can correct me if I am wrong, but stock may be 1.34+ periodically but will sit lower generally. I think stock boosting doesn't work all that great also. This is different than speeds you'd get while overclock ff you set a constant voltage of like 1.3V or so it can probably reach a static speed of anywhere from 3.8 to 4 ghz
  6. I agree, but maybe someone who knows things could elaborate is all. Doubt there's any other conclusion to draw here
  7. I bent pin doesn't mean it's broken. There were probably 15ish bent pins and all the others were bent back easily
  8. I decided it was a good idea to buy a ryzen 3400g with bent pins because I am cheap and thought I could fix it. I was able to un-bend all the pins, but in the process two pins fell off and it will not boot sadly. I know some people solder extra pins on, which is an option I guess. Based on the diagram from the diagram I posted below it is a VSS pin and MB_Data(26). Not sure if those are important, if anyone knows if they can or cannot boot with those let me know. Also a little peeved because the dude who shipped it to me sent it loose in a box. Oh well, there goes $50. https://www
  9. I recently went from an rx570 to a gtx 1660. Around the time of the change I started getting this issue when I try to boot the power button only works like 1 in 15 times or worse. Once it does boot there are no issues and everything works great. The aio will make some noise like its starting/light up and the gpu fans will spin, but it wont start the pc. Also when this happens the computer boots to the secondary monitor and requires a restart to get my dual monitors back. Does anyone have any idea what is going on? I check the front panel cables and they looked all plugged in. Also
  10. Is anyone familiar with a small ITX case to use for like an HTPC that can fit an sfx power supply and a 120mm aio? Not looking for gpu support and the smaller the better. Looking for smaller than a sg-13
  11. I recently went from an rx570 to a gtx 1660. Now when I try to boot the power button only works like 1 in 15 times The aio will make some noise like its starting and the gpu fans will spin, but it wont start the pc. Also when this happens the computer boots to the secondary monitor and requires a restart to get my dual monitors back. Does anyone have any idea what is going on? I check the front panel cables and they looked all plugged in. Also sometimes if I unplug my front usb cables the computer sometimes boots. msi b450 itx, sg-13, evga supernova 450 gm, uh corsair lpx ram 3200, corsai
  12. msi b450 itx, sg-13, evga supernova 450 gm, uh corsair lpx ram 3200, corsair h60 aio, msi gaming x 1660
  13. msi b450 itx, sg-13, evga supernova 450 gm, uh corsair lpx ram 3200, corsair h60 aio, msi gaming x 1660
  14. I recently went from an rx570 to a gtx 1660. Now when I try to boot the power button only works like 1 in 15 times The aio will make some noise like its starting and the gpu fans will spin, but it wont start the pc. Also when this happens the computer boots to the secondary monitor and requires a restart to get my dual monitors back. Not sure where to post this, but does anyone have any idea what is going on? I check the front panel cables and they looked all plugged in.
×